Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>

In the SSLV2ClientHello processing code in ssl3_get_record, the value of
|num_recs| will always be 0. This isn't obvious from the code so a comment
is added to explain it.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

When RSA went opaque a bug was introduced into the dasync engine where
the wrong function was being set for the rsa_priv_dec operation.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

The function ssl3_get_record() can obtain multiple records in one go
as long as we are set up for pipelining and all the records are app
data records. The logic in the while loop which reads in each record is
supposed to only continue looping if the last record we read was app data
and we have an app data record waiting in the buffer to be processed. It
was actually checking that the first record had app data and we have an
app data record waiting. This actually amounts to the same thing so wasn't
wrong - but it looks a bit odd because it uses the |rr| array without an
offset.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Pipelining introduced the concept of multiple records being read in one
go. Therefore we work with an array of SSL3_RECORD objects. The pipelining
change erroneously made a change in ssl3_get_record() to apply the current
record offset to the SSL3_BUFFER we are using for reading. This is wrong -
there is only ever one read buffer. This reverts that change. In practice
this should make little difference because the code block in question is
only ever used when we are processing a single record.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix various references to s3_clnt.c and s3_srvr.c which don't exist
any more.

GitHub Issue #765

Reviewed-by: Richard Levitte <levitte@openssl.org>

An if checks the value of |type| to see if it is V_ASN1_VISIBLESTRING
twice. We only need to do it once.

GitHub Issue #656

Reviewed-by: Richard Levitte <levitte@openssl.org>

SSL_get_async_wait_fd() was replaced by SSL_get_all_async_fds() and
SSL_get_changed_async_fds().

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Due to short-circuiting we only need to check "cipher" for NULL once.

PR#699

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

CLA: none; trivial

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>

GH: #1070

Reviewed-by: Matt Caswell <matt@openssl.org>

MR: #2153

This involves providing more session ticket key data, for both the cipher and
the digest

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>

GH: #515, MR: #2153

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>

GH: #515, MR: #2153

RT#4215

Reviewed-by: Richard Levitte <levitte@openssl.org>

The given sizes to not include the final NUL character.

RT#2622

Reviewed-by: Matt Caswell <matt@openssl.org>

Workaround an apparent IO:Socket::IP bug where a seemingly valid
server socket is being returned even though a valid connection does not
exist. This causes the tests to intermittently hang. We additionally check
that the peerport looks ok to verify that the returned socket looks usable.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Document thread-safe lock creation

Reviewed-by: Richard Levitte <levitte@openssl.org>

RT#2534

Reviewed-by: Tim Hudson <tjh@openssl.org>

RT#2558

Reviewed-by: Tim Hudson <tjh@openssl.org>

RT#2616

Reviewed-by: Tim Hudson <tjh@openssl.org>

Some setups use links inside .git directory and make clean should not
remove them to avoid breaking git meta-information.

Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>

CLA: none; trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1078)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1063)

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

The previous commit added SSL_CTX_set_tlsext_status_type(). This one adds
some documentation for it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

To allow OCSP stapling to work with libcurl.

Github PR #200

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Since 50932c4a "PACKETise ServerHello processing",
ssl_next_proto_validate() incorrectly allows empty protocol name.
draft-agl-tls-nextprotoneg-04[1] says "Implementations MUST ensure that
the empty string is not included and that no byte strings are
truncated."
This patch restores the old correct behavior.

[1] https://tools.ietf.org/html/draft-agl-tls-nextprotoneg-04



Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Add a status return value instead of void.
Add some sanity checks on reference counter value.
Update the docs.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

- "/Ox /O2 /Ob2" get's reduced to "/O2", the reason being:

    /Ox = /Ob2 /Og /Oi /Ot /Oy /Gs
    /O2 = /Ob2 /Og /Oi /Ot /Oy /Gs /GF /Gy

- apps/openssl.cnf gets installed.

- always delete files quietly, as they might not be there.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1075)

Fix some missing OBJ_dup failure checks.
Merged from
https://boringssl.googlesource.com/boringssl/+/0ce78a757d815c0dde9ed5884229f3a5b2cb3e9c%5E

!

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1057)

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1042)

The current limit of 2^14 bytes is too low (e.g. RFC 5246 specifies the
maximum size of just the extensions field to be 2^16-1), and may cause
bogus failures.

RT#4063

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/413)