url.c

  return 0; /* Proxy was successful! */
}

/*
 * This function logs in to a SOCKS5 proxy and sends the specifics to the final
 * destination server.
 */
static int handleSock5Proxy(const char *proxy_name,
                            const char *proxy_password,
                            struct connectdata *conn)
{
  /*
    According to the RFC1928, section "6.  Replies". This is what a SOCK5
    replies:

        +----+-----+-------+------+----------+----------+
        |VER | REP |  RSV  | ATYP | BND.ADDR | BND.PORT |
        +----+-----+-------+------+----------+----------+
        | 1  |  1  | X'00' |  1   | Variable |    2     |
        +----+-----+-------+------+----------+----------+

    Where:

    o  VER    protocol version: X'05'
    o  REP    Reply field:
    o  X'00' succeeded
  */

  unsigned char socksreq[600]; /* room for large user/pw (255 max each) */
  ssize_t actualread;
  ssize_t written;
  int result;
  CURLcode code;
  curl_socket_t sock = conn->sock[FIRSTSOCKET];

  Curl_nonblock(sock, FALSE);

  socksreq[0] = 5; /* version */
  socksreq[1] = (char)(proxy_name ? 2 : 1); /* number of methods (below) */
  socksreq[2] = 0; /* no authentication */
  socksreq[3] = 2; /* username/password */

  code = Curl_write(conn, sock, (char *)socksreq, (2 + (int)socksreq[1]),
                      &written);
  if ((code != CURLE_OK) || (written != (2 + (int)socksreq[1]))) {
    failf(conn->data, "Unable to send initial SOCKS5 request.");
    return 1;
  }

  result=Curl_read(conn, sock, (char *)socksreq, 2, &actualread);
  if ((result != CURLE_OK) || (actualread != 2)) {
    failf(conn->data, "Unable to receive initial SOCKS5 response.");
    return 1;
  }

  if (socksreq[0] != 5) {
    failf(conn->data, "Received invalid version in initial SOCKS5 response.");
    return 1;
  }
  if (socksreq[1] == 0) {
    /* Nothing to do, no authentication needed */
    ;
  }
  else if (socksreq[1] == 2) {
    /* Needs user name and password */
    int userlen, pwlen, len;

    userlen = (int)strlen(proxy_name);
    pwlen = proxy_password?(int)strlen(proxy_password):0;

    /*   username/password request looks like
     * +----+------+----------+------+----------+
     * |VER | ULEN |  UNAME   | PLEN |  PASSWD  |
     * +----+------+----------+------+----------+
     * | 1  |  1   | 1 to 255 |  1   | 1 to 255 |
     * +----+------+----------+------+----------+
     */
    len = 0;
    socksreq[len++] = 1;    /* username/pw subnegotiation version */
    socksreq[len++] = (char) userlen;
    memcpy(socksreq + len, proxy_name, (int) userlen);
    len += userlen;
    socksreq[len++] = (char) pwlen;
    memcpy(socksreq + len, proxy_password, (int) pwlen);
    len += pwlen;

    code = Curl_write(conn, sock, (char *)socksreq, len, &written);
    if ((code != CURLE_OK) || (len != written)) {
      failf(conn->data, "Failed to send SOCKS5 sub-negotiation request.");
      return 1;
    }

    result=Curl_read(conn, sock, (char *)socksreq, 2, &actualread);
    if ((result != CURLE_OK) || (actualread != 2)) {
      failf(conn->data, "Unable to receive SOCKS5 sub-negotiation response.");
      return 1;
    }

    /* ignore the first (VER) byte */
    if (socksreq[1] != 0) { /* status */
      failf(conn->data, "User was rejected by the SOCKS5 server (%d %d).",
            socksreq[0], socksreq[1]);
      return 1;
    }

    /* Everything is good so far, user was authenticated! */
  }
  else {
    /* error */
    if (socksreq[1] == 1) {
      failf(conn->data,
            "SOCKS5 GSSAPI per-message authentication is not supported.");
      return 1;
    }
    else if (socksreq[1] == 255) {
      if (!proxy_name || !*proxy_name) {
        failf(conn->data,
              "No authentication method was acceptable. (It is quite likely"
              " that the SOCKS5 server wanted a username/password, since none"
              " was supplied to the server on this connection.)");
      }
      else {
        failf(conn->data, "No authentication method was acceptable.");
      }
      return 1;
    }
    else {
      failf(conn->data,
            "Undocumented SOCKS5 mode attempted to be used by server.");
      return 1;
    }
  }

  /* Authentication is complete, now specify destination to the proxy */
  socksreq[0] = 5; /* version (SOCKS5) */
  socksreq[1] = 1; /* connect */
  socksreq[2] = 0; /* must be zero */
  socksreq[3] = 1; /* IPv4 = 1 */

  {
    struct Curl_dns_entry *dns;
    Curl_addrinfo *hp=NULL;
    int rc = Curl_resolv(conn, conn->host.name, (int)conn->remote_port, &dns);

    if(rc == CURLRESOLV_ERROR)
      return 1;

    if(rc == CURLRESOLV_PENDING)
      /* this requires that we're in "wait for resolve" state */
      rc = Curl_wait_for_resolv(conn, &dns);

    /*
     * We cannot use 'hostent' as a struct that Curl_resolv() returns.  It
     * returns a Curl_addrinfo pointer that may not always look the same.
     */
    if(dns)
      hp=dns->addr;
    if (hp) {
      char buf[64];
      unsigned short ip[4];
      Curl_printable_address(hp, buf, sizeof(buf));

      if(4 == sscanf( buf, "%hu.%hu.%hu.%hu",
                      &ip[0], &ip[1], &ip[2], &ip[3])) {
        socksreq[4] = (unsigned char)ip[0];
        socksreq[5] = (unsigned char)ip[1];
        socksreq[6] = (unsigned char)ip[2];
        socksreq[7] = (unsigned char)ip[3];
      }
      else
        hp = NULL; /* fail! */

      Curl_resolv_unlock(conn->data, dns); /* not used anymore from now on */
    }
    if(!hp) {
      failf(conn->data, "Failed to resolve \"%s\" for SOCKS5 connect.",
            conn->host.name);
      return 1;
    }
  }

  *((unsigned short*)&socksreq[8]) = htons(conn->remote_port);

  {
    const int packetsize = 10;

    code = Curl_write(conn, sock, (char *)socksreq, packetsize, &written);
    if ((code != CURLE_OK) || (written != packetsize)) {
      failf(conn->data, "Failed to send SOCKS5 connect request.");
      return 1;
    }

    result = Curl_read(conn, sock, (char *)socksreq, packetsize, &actualread);
    if ((result != CURLE_OK) || (actualread != packetsize)) {
      failf(conn->data, "Failed to receive SOCKS5 connect request ack.");
      return 1;
    }

    if (socksreq[0] != 5) { /* version */
      failf(conn->data,
            "SOCKS5 reply has wrong version, version should be 5.");
      return 1;
    }
    if (socksreq[1] != 0) { /* Anything besides 0 is an error */
        failf(conn->data,
              "Can't complete SOCKS5 connection to %d.%d.%d.%d:%d. (%d)",
              (unsigned char)socksreq[4], (unsigned char)socksreq[5],
              (unsigned char)socksreq[6], (unsigned char)socksreq[7],
              (unsigned int)ntohs(*(unsigned short*)(&socksreq[8])),
              socksreq[1]);
        return 1;
    }
  }

  Curl_nonblock(sock, TRUE);
  return 0; /* Proxy was successful! */
}

static CURLcode ConnectPlease(struct connectdata *conn,
                              struct Curl_dns_entry *hostaddr,
                              bool *connected)
{
  CURLcode result;
  Curl_addrinfo *addr;
  struct SessionHandle *data = conn->data;
  char *hostname = data->change.proxy?conn->proxy.name:conn->host.name;

  infof(data, "About to connect() to %s%s port %d\n",
        data->change.proxy?"proxy ":"",
        hostname, conn->port);

  /*************************************************************
   * Connect to server/proxy
   *************************************************************/
  result= Curl_connecthost(conn,
                           hostaddr,
                           &conn->sock[FIRSTSOCKET],
                           &addr,
                           connected);
  if(CURLE_OK == result) {
    /* All is cool, then we store the current information */
    conn->dns_entry = hostaddr;
    conn->ip_addr = addr;

    Curl_store_ip_addr(conn);

    switch(conn->data->set.proxytype) {
    case CURLPROXY_SOCKS5:
      return handleSock5Proxy(conn->proxyuser,
                              conn->proxypasswd,
                              conn) ?
        CURLE_COULDNT_CONNECT : CURLE_OK;
    case CURLPROXY_HTTP:
      /* do nothing here. handled later. */
      break;
    case CURLPROXY_SOCKS4:
      return handleSock4Proxy(conn->proxyuser, conn) ?
      	CURLE_COULDNT_CONNECT : CURLE_OK;
    default:
      failf(conn->data, "unknown proxytype option given");
      return CURLE_COULDNT_CONNECT;
    }
  }

  return result;
}

/*
 * verboseconnect() displays verbose information after a connect
 */
static void verboseconnect(struct connectdata *conn)
{
  infof(conn->data, "Connected to %s (%s) port %d\n",
        conn->bits.httpproxy ? conn->proxy.dispname : conn->host.dispname,
        conn->ip_addr_str, conn->port);
}

CURLcode Curl_protocol_fdset(struct connectdata *conn,
                             fd_set *read_fd_set,
                             fd_set *write_fd_set,
                             int *max_fdp)
{
  CURLcode res = CURLE_OK;
  if(conn->curl_proto_fdset)
    res = conn->curl_proto_fdset(conn, read_fd_set, write_fd_set, max_fdp);
  return res;
}

CURLcode Curl_doing_fdset(struct connectdata *conn,
                          fd_set *read_fd_set,
                          fd_set *write_fd_set,
                          int *max_fdp)
{
  CURLcode res = CURLE_OK;
  if(conn && conn->curl_doing_fdset)
    res = conn->curl_doing_fdset(conn, read_fd_set, write_fd_set, max_fdp);
  return res;
}

/*
 * We are doing protocol-specific connecting and this is being called over and
 * over from the multi interface until the connection phase is done on
 * protocol layer.
 */

CURLcode Curl_protocol_connecting(struct connectdata *conn, bool *done)
{
  CURLcode result=CURLE_OK;

  if(conn && conn->curl_connecting) {
    *done = FALSE;
    result = conn->curl_connecting(conn, done);
  }
  else
    *done = TRUE;

  return result;
}

/*
 * We are DOING this is being called over and over from the multi interface
 * until the DOING phase is done on protocol layer.
 */

CURLcode Curl_protocol_doing(struct connectdata *conn, bool *done)
{
  CURLcode result=CURLE_OK;

  if(conn && conn->curl_doing) {
    *done = FALSE;
    result = conn->curl_doing(conn, done);
  }
  else
    *done = TRUE;

  return result;
}

/*
 * We have discovered that the TCP connection has been successful, we can now
 * proceed with some action.
 *
 */
CURLcode Curl_protocol_connect(struct connectdata *conn, bool *protocol_done)
{
  struct SessionHandle *data = conn->data;
  CURLcode result=CURLE_OK;

  *protocol_done = FALSE;

  if(conn->bits.tcpconnect && conn->bits.protoconnstart) {
    /* We already are connected, get back. This may happen when the connect
       worked fine in the first call, like when we connect to a local server
       or proxy. Note that we don't know if the protocol is actually done.

       Unless this protocol doesn't have any protocol-connect callback, as
       then we know we're done. */
    if(!conn->curl_connecting)
      *protocol_done = TRUE;

    return CURLE_OK;
  }

  if(!conn->bits.tcpconnect) {

    Curl_pgrsTime(data, TIMER_CONNECT); /* connect done */

    if(data->set.verbose)
      verboseconnect(conn);
  }

  if(!conn->bits.protoconnstart) {
    if(conn->curl_connect) {
      /* is there a protocol-specific connect() procedure? */

      /* Set start time here for timeout purposes in the connect procedure, it
         is later set again for the progress meter purpose */
      conn->now = Curl_tvnow();

      /* Call the protocol-specific connect function */
      result = conn->curl_connect(conn, protocol_done);
    }
    else
      *protocol_done = TRUE;

    /* it has started, possibly even completed but that knowledge isn't stored
       in this bit! */
    conn->bits.protoconnstart = TRUE;
  }

  return result; /* pass back status */
}

/*
 * Helpers for IDNA convertions.
 */
#ifdef USE_LIBIDN
static bool is_ASCII_name(const char *hostname)
{
  const unsigned char *ch = (const unsigned char*)hostname;

  while (*ch) {
    if (*ch++ & 0x80)
      return FALSE;
  }
  return TRUE;
}

/*
 * Check if characters in hostname is allowed in Top Level Domain.
 */
static bool tld_check_name(struct SessionHandle *data,
                           const char *ace_hostname)
{
  size_t err_pos;
  char *uc_name = NULL;
  int rc;

  /* Convert (and downcase) ACE-name back into locale's character set */
  rc = idna_to_unicode_lzlz(ace_hostname, &uc_name, 0);
  if (rc != IDNA_SUCCESS)
    return (FALSE);

  rc = tld_check_lz(uc_name, &err_pos, NULL);
  if (rc == TLD_INVALID)
     infof(data, "WARNING: %s; pos %u = `%c'/0x%02X\n",
#ifdef HAVE_TLD_STRERROR
           tld_strerror(rc),
#else
           "<no msg>",
#endif
           err_pos, uc_name[err_pos],
           uc_name[err_pos] & 255);
  else if (rc != TLD_SUCCESS)
       infof(data, "WARNING: TLD check for %s failed; %s\n",
             uc_name,
#ifdef HAVE_TLD_STRERROR
             tld_strerror(rc)
#else
             "<no msg>"
#endif
         );
  if (uc_name)
     idn_free(uc_name);
  return (rc == TLD_SUCCESS);
}
#endif

static void fix_hostname(struct connectdata *conn, struct hostname *host)
{
  /* set the name we use to display the host name */
  host->dispname = host->name;

#ifdef USE_LIBIDN
  /*************************************************************
   * Check name for non-ASCII and convert hostname to ACE form.
   *************************************************************/
  if (!is_ASCII_name(host->name) &&
      stringprep_check_version(LIBIDN_REQUIRED_VERSION)) {
    char *ace_hostname = NULL;
    struct SessionHandle *data = conn->data;
    int rc = idna_to_ascii_lz(host->name, &ace_hostname, 0);
    infof (data, "Input domain encoded as `%s'\n",
           stringprep_locale_charset ());
    if (rc != IDNA_SUCCESS)
      infof(data, "Failed to convert %s to ACE; %s\n",
            host->name, Curl_idn_strerror(conn,rc));
    else {
      /* tld_check_name() displays a warning if the host name contains
         "illegal" characters for this TLD */
      (void)tld_check_name(data, ace_hostname);

      host->encalloc = ace_hostname;
      /* change the name pointer to point to the encoded hostname */
      host->name = host->encalloc;
    }
  }
#else
  (void)conn; /* never used */
#endif
}


/**
 * CreateConnection() sets up a new connectdata struct, or re-uses an already
 * existing one, and resolves host name.
 *
 * if this function returns CURLE_OK and *async is set to TRUE, the resolve
 * response will be coming asynchronously. If *async is FALSE, the name is
 * already resolved.
 *
 * @param data The sessionhandle pointer
 * @param in_connect is set to the next connection data pointer
 * @param addr is set to the new dns entry for this connection. If this
 *        connection is re-used it will be NULL.
 * @param async is set TRUE/FALSE depending on the nature of this lookup
 * @return CURLcode
 * @see SetupConnection()
 */

static CURLcode CreateConnection(struct SessionHandle *data,
                                 struct connectdata **in_connect,
                                 struct Curl_dns_entry **addr,
                                 bool *async)
{
  char *tmp;
  char *at;
  CURLcode result=CURLE_OK;
  struct connectdata *conn;
  struct connectdata *conn_temp = NULL;
  size_t urllen;
  struct Curl_dns_entry *hostaddr;
#if defined(HAVE_ALARM) && !defined(USE_ARES)
  unsigned int prev_alarm=0;
#endif
  char endbracket;
  char user[MAX_CURL_USER_LENGTH];
  char passwd[MAX_CURL_PASSWORD_LENGTH];
  int rc;
  bool reuse;

#ifndef USE_ARES
#ifdef SIGALRM
#ifdef HAVE_SIGACTION
  struct sigaction keep_sigact;   /* store the old struct here */
  bool keep_copysig=FALSE;        /* did copy it? */
#else
#ifdef HAVE_SIGNAL
  void *keep_sigact;              /* store the old handler here */
#endif /* HAVE_SIGNAL */
#endif /* HAVE_SIGACTION */
#endif /* SIGALRM */
#endif /* USE_ARES */

  *addr = NULL; /* nothing yet */
  *async = FALSE;

  /*************************************************************
   * Check input data
   *************************************************************/

  if(!data->change.url)
    return CURLE_URL_MALFORMAT;

  /* First, split up the current URL in parts so that we can use the
     parts for checking against the already present connections. In order
     to not have to modify everything at once, we allocate a temporary
     connection data struct and fill in for comparison purposes. */

  conn = (struct connectdata *)calloc(sizeof(struct connectdata), 1);
  if(!conn) {
    *in_connect = NULL; /* clear the pointer */
    return CURLE_OUT_OF_MEMORY;
  }
  /* We must set the return variable as soon as possible, so that our
     parent can cleanup any possible allocs we may have done before
     any failure */
  *in_connect = conn;

  /* and we setup a few fields in case we end up actually using this struct */
  conn->data = data;           /* remember our daddy */
  conn->sock[FIRSTSOCKET] = CURL_SOCKET_BAD;     /* no file descriptor */
  conn->sock[SECONDARYSOCKET] = CURL_SOCKET_BAD; /* no file descriptor */
  conn->connectindex = -1;    /* no index */
  conn->bits.httpproxy = (data->change.proxy && *data->change.proxy &&
                          (data->set.proxytype == CURLPROXY_HTTP))?
    TRUE:FALSE; /* http proxy or not */

  /* Default protocol-independent behavior doesn't support persistent
     connections, so we set this to force-close. Protocols that support
     this need to set this to FALSE in their "curl_do" functions. */
  conn->bits.close = TRUE;

  /* maxdownload must be -1 on init, as 0 is a valid value! */
  conn->maxdownload = -1;  /* might have been used previously! */

  /* Store creation time to help future close decision making */
  conn->created = Curl_tvnow();

  conn->bits.use_range = data->set.set_range?TRUE:FALSE; /* range status */
  conn->range = data->set.set_range;              /* clone the range setting */
  conn->resume_from = data->set.set_resume_from;   /* inherit resume_from */

  conn->bits.user_passwd = data->set.userpwd?1:0;
  conn->bits.proxy_user_passwd = data->set.proxyuserpwd?1:0;
  conn->bits.no_body = data->set.opt_no_body;
  conn->bits.tunnel_proxy = data->set.tunnel_thru_httpproxy;
  conn->bits.ftp_use_epsv = data->set.ftp_use_epsv;
  conn->bits.ftp_use_eprt = data->set.ftp_use_eprt;

  /* This initing continues below, see the comment "Continue connectdata
   * initialization here" */

  /***********************************************************
   * We need to allocate memory to store the path in. We get the size of the
   * full URL to be sure, and we need to make it at least 256 bytes since
   * other parts of the code will rely on this fact
   ***********************************************************/
#define LEAST_PATH_ALLOC 256
  urllen=strlen(data->change.url);
  if(urllen < LEAST_PATH_ALLOC)
    urllen=LEAST_PATH_ALLOC;

  /*
   * We malloc() the buffers below urllen+2 to make room for to possibilities:
   * 1 - an extra terminating zero
   * 2 - an extra slash (in case a syntax like "www.host.com?moo" is used)
   */

  conn->pathbuffer=(char *)malloc(urllen+2);
  if(NULL == conn->pathbuffer)
    return CURLE_OUT_OF_MEMORY; /* really bad error */
  conn->path = conn->pathbuffer;

  conn->host.rawalloc=(char *)malloc(urllen+2);
  if(NULL == conn->host.rawalloc)
    return CURLE_OUT_OF_MEMORY;
  conn->host.name = conn->host.rawalloc;
  conn->host.name[0] = 0;

  /*************************************************************
   * Parse the URL.
   *
   * We need to parse the url even when using the proxy, because we will need
   * the hostname and port in case we are trying to SSL connect through the
   * proxy -- and we don't know if we will need to use SSL until we parse the
   * url ...
   ************************************************************/
  if((2 == sscanf(data->change.url, "%15[^:]:%[^\n]",
                  conn->protostr,
                  conn->path)) && strequal(conn->protostr, "file")) {
    if(conn->path[0] == '/' && conn->path[1] == '/') {
      /* Allow omitted hostname (e.g. file:/<path>).  This is not strictly
       * speaking a valid file: URL by RFC 1738, but treating file:/<path> as
       * file://localhost/<path> is similar to how other schemes treat missing
       * hostnames.  See RFC 1808. */

      /* This cannot be done with strcpy() in a portable manner, since the
         memory areas overlap! */
      memmove(conn->path, conn->path + 2, strlen(conn->path + 2)+1);
    }
    /*
     * we deal with file://<host>/<path> differently since it supports no
     * hostname other than "localhost" and "127.0.0.1", which is unique among
     * the URL protocols specified in RFC 1738
     */
    if(conn->path[0] != '/') {
      /* the URL included a host name, we ignore host names in file:// URLs
         as the standards don't define what to do with them */
      char *ptr=strchr(conn->path, '/');
      if(ptr) {
        /* there was a slash present

           RFC1738 (section 3.1, page 5) says:

           The rest of the locator consists of data specific to the scheme,
           and is known as the "url-path". It supplies the details of how the
           specified resource can be accessed. Note that the "/" between the
           host (or port) and the url-path is NOT part of the url-path.

           As most agents use file://localhost/foo to get '/foo' although the
           slash preceding foo is a separator and not a slash for the path,
           a URL as file://localhost//foo must be valid as well, to refer to
           the same file with an absolute path.
        */

        if(ptr[1] && ('/' == ptr[1]))
          /* if there was two slashes, we skip the first one as that is then
             used truly as a separator */
          ptr++;

        /* This cannot be made with strcpy, as the memory chunks overlap! */
        memmove(conn->path, ptr, strlen(ptr)+1);
      }
    }

    strcpy(conn->protostr, "file"); /* store protocol string lowercase */
  }
  else {
    /* clear path */
    conn->path[0]=0;

    if (2 > sscanf(data->change.url,
                   "%15[^\n:]://%[^\n/]%[^\n]",
                   conn->protostr,
                   conn->host.name, conn->path)) {

      /*
       * The URL was badly formatted, let's try the browser-style _without_
       * protocol specified like 'http://'.
       */
      if((1 > sscanf(data->change.url, "%[^\n/]%[^\n]",
                     conn->host.name, conn->path)) ) {
        /*
         * We couldn't even get this format.
         */
        failf(data, "<url> malformed");
        return CURLE_URL_MALFORMAT;
      }

      /*
       * Since there was no protocol part specified, we guess what protocol it
       * is based on the first letters of the server name.
       */

      /* Note: if you add a new protocol, please update the list in
       * lib/version.c too! */

      if(checkprefix("FTP.", conn->host.name))
        strcpy(conn->protostr, "ftp");
#ifdef USE_SSL
      else if(checkprefix("FTPS", conn->host.name))
        strcpy(conn->protostr, "ftps");
#endif /* USE_SSL */
      else if(checkprefix("TELNET.", conn->host.name))
        strcpy(conn->protostr, "telnet");
      else if (checkprefix("DICT.", conn->host.name))
        strcpy(conn->protostr, "DICT");
      else if (checkprefix("LDAP.", conn->host.name))
        strcpy(conn->protostr, "LDAP");
      else {
        strcpy(conn->protostr, "http");
      }

      conn->protocol |= PROT_MISSING; /* not given in URL */
    }
  }

  /* We search for '?' in the host name (but only on the right side of a
   * @-letter to allow ?-letters in username and password) to handle things
   * like http://example.com?param= (notice the missing '/').
   */
  at = strchr(conn->host.name, '@');
  if(at)
    tmp = strchr(at+1, '?');
  else
    tmp = strchr(conn->host.name, '?');

  if(tmp) {
    /* We must insert a slash before the '?'-letter in the URL. If the URL had
       a slash after the '?', that is where the path currently begins and the
       '?string' is still part of the host name.

       We must move the trailing part from the host name and put it first in
       the path. And have it all prefixed with a slash.
    */

    size_t hostlen = strlen(tmp);
    size_t pathlen = strlen(conn->path);

    /* move the existing path plus the zero byte forward, to make room for
       the host-name part */
    memmove(conn->path+hostlen+1, conn->path, pathlen+1);

     /* now copy the trailing host part in front of the existing path */
    memcpy(conn->path+1, tmp, hostlen);

    conn->path[0]='/'; /* prepend the missing slash */

    *tmp=0; /* now cut off the hostname at the ? */
  }
  else if(!conn->path[0]) {
    /* if there's no path set, use a single slash */
    strcpy(conn->path, "/");
  }

  /* If the URL is malformatted (missing a '/' after hostname before path) we
   * insert a slash here. The only letter except '/' we accept to start a path
   * is '?'.
   */
  if(conn->path[0] == '?') {
    /* We need this function to deal with overlapping memory areas. We know
       that the memory area 'path' points to is 'urllen' bytes big and that
       is bigger than the path. Use +1 to move the zero byte too. */
    memmove(&conn->path[1], conn->path, strlen(conn->path)+1);
    conn->path[0] = '/';
  }

  /*
   * So if the URL was A://B/C,
   *   conn->protostr is A
   *   conn->host.name is B
   *   conn->path is /C
   */

  /*************************************************************
   * Take care of proxy authentication stuff
   *************************************************************/
  if(conn->bits.proxy_user_passwd) {
    char proxyuser[MAX_CURL_USER_LENGTH]="";
    char proxypasswd[MAX_CURL_PASSWORD_LENGTH]="";

    sscanf(data->set.proxyuserpwd,
           "%" MAX_CURL_USER_LENGTH_TXT "[^:]:"
           "%" MAX_CURL_PASSWORD_LENGTH_TXT "[^\n]",
           proxyuser, proxypasswd);

    conn->proxyuser = curl_unescape(proxyuser,0);
    if(!conn->proxyuser)
      return CURLE_OUT_OF_MEMORY;

    conn->proxypasswd = curl_unescape(proxypasswd,0);
    if(!conn->proxypasswd)
      return CURLE_OUT_OF_MEMORY;
  }

#ifndef CURL_DISABLE_HTTP
  /*************************************************************
   * Detect what (if any) proxy to use
   *************************************************************/
  if(!data->change.proxy) {
    /* If proxy was not specified, we check for default proxy environment
     * variables, to enable i.e Lynx compliance:
     *
     * http_proxy=http://some.server.dom:port/
     * https_proxy=http://some.server.dom:port/
     * ftp_proxy=http://some.server.dom:port/
     * no_proxy=domain1.dom,host.domain2.dom
     *   (a comma-separated list of hosts which should
     *   not be proxied, or an asterisk to override
     *   all proxy variables)
     * all_proxy=http://some.server.dom:port/
     *   (seems to exist for the CERN www lib. Probably
     *   the first to check for.)
     *
     * For compatibility, the all-uppercase versions of these variables are
     * checked if the lowercase versions don't exist.
     */
    char *no_proxy=NULL;
    char *no_proxy_tok_buf;
    char *proxy=NULL;
    char proxy_env[128];

    no_proxy=curl_getenv("no_proxy");
    if(!no_proxy)
      no_proxy=curl_getenv("NO_PROXY");

    if(!no_proxy || !strequal("*", no_proxy)) {
      /* NO_PROXY wasn't specified or it wasn't just an asterisk */
      char *nope;

      nope=no_proxy?strtok_r(no_proxy, ", ", &no_proxy_tok_buf):NULL;
      while(nope) {
        size_t namelen;
        char *endptr = strchr(conn->host.name, ':');
        if(endptr)
          namelen=endptr-conn->host.name;
        else
          namelen=strlen(conn->host.name);

        if(strlen(nope) <= namelen) {
          char *checkn=
            conn->host.name + namelen - strlen(nope);
          if(checkprefix(nope, checkn)) {
            /* no proxy for this host! */
            break;
          }
        }
        nope=strtok_r(NULL, ", ", &no_proxy_tok_buf);
      }
      if(!nope) {
        /* It was not listed as without proxy */
        char *protop = conn->protostr;
        char *envp = proxy_env;
        char *prox;

        /* Now, build <protocol>_proxy and check for such a one to use */
        while(*protop)
          *envp++ = tolower((int)*protop++);

        /* append _proxy */
        strcpy(envp, "_proxy");

        /* read the protocol proxy: */
        prox=curl_getenv(proxy_env);

        /*
         * We don't try the uppercase version of HTTP_PROXY because of
         * security reasons:
         *
         * When curl is used in a webserver application
         * environment (cgi or php), this environment variable can
         * be controlled by the web server user by setting the
         * http header 'Proxy:' to some value.
         *
         * This can cause 'internal' http/ftp requests to be
         * arbitrarily redirected by any external attacker.
         */
        if(!prox && !strequal("http_proxy", proxy_env)) {
          /* There was no lowercase variable, try the uppercase version: */
          for(envp = proxy_env; *envp; envp++)
            *envp = toupper((int)*envp);
          prox=curl_getenv(proxy_env);
        }

        if(prox && *prox) { /* don't count "" strings */
          proxy = prox; /* use this */
        }
        else {
          proxy = curl_getenv("all_proxy"); /* default proxy to use */
          if(!proxy)
            proxy=curl_getenv("ALL_PROXY");
        }

        if(proxy && *proxy) {
          long bits = conn->protocol & (PROT_HTTPS|PROT_SSL);
          data->change.proxy = proxy;
          data->change.proxy_alloc=TRUE; /* this needs to be freed later */
          conn->bits.httpproxy = TRUE;

          /* force this to become HTTP */
          conn->protocol = PROT_HTTP | bits;
        }
      } /* if (!nope) - it wasn't specified non-proxy */
    } /* NO_PROXY wasn't specified or '*' */
    if(no_proxy)
      free(no_proxy);
  } /* if not using proxy */
#endif /* CURL_DISABLE_HTTP */

  /*************************************************************
   * No protocol part in URL was used, add it!
   *************************************************************/
  if(conn->protocol&PROT_MISSING) {
    /* We're guessing prefixes here and if we're told to use a proxy or if
       we're gonna follow a Location: later or... then we need the protocol
       part added so that we have a valid URL. */
    char *reurl;

    reurl = aprintf("%s://%s", conn->protostr, data->change.url);

    if(!reurl)
      return CURLE_OUT_OF_MEMORY;

    data->change.url = reurl;
    data->change.url_alloc = TRUE; /* free this later */
    conn->protocol &= ~PROT_MISSING; /* switch that one off again */
  }

#ifndef CURL_DISABLE_HTTP
  /************************************************************
   * RESUME on a HTTP page is a tricky business. First, let's just check that
   * 'range' isn't used, then set the range parameter and leave the resume as
   * it is to inform about this situation for later use. We will then
   * "attempt" to resume, and if we're talking to a HTTP/1.1 (or later)
   * server, we will get the document resumed. If we talk to a HTTP/1.0
   * server, we just fail since we can't rewind the file writing from within
   * this function.
   ***********************************************************/
  if(conn->resume_from) {
    if(!conn->bits.use_range) {
      /* if it already was in use, we just skip this */
      conn->range = aprintf("%" FORMAT_OFF_T "-", conn->resume_from);
      if(!conn->range)
        return CURLE_OUT_OF_MEMORY;
      conn->bits.rangestringalloc = TRUE; /* mark as allocated */
      conn->bits.use_range = 1; /* switch on range usage */
    }
  }
#endif
  /*************************************************************
   * Setup internals depending on protocol
   *************************************************************/

  conn->socktype = SOCK_STREAM; /* most of them are TCP streams */

  if (strequal(conn->protostr, "HTTP")) {
#ifndef CURL_DISABLE_HTTP
    conn->port = PORT_HTTP;
    conn->remote_port = PORT_HTTP;
    conn->protocol |= PROT_HTTP;
    conn->curl_do = Curl_http;
    conn->curl_do_more = NULL;
    conn->curl_done = Curl_http_done;
    conn->curl_connect = Curl_http_connect;
#else
    failf(data, LIBCURL_NAME
          " was built with HTTP disabled, http: not supported!");
    return CURLE_UNSUPPORTED_PROTOCOL;
#endif
  }
  else if (strequal(conn->protostr, "HTTPS")) {
#if defined(USE_SSL) && !defined(CURL_DISABLE_HTTP)

    conn->port = PORT_HTTPS;
    conn->remote_port = PORT_HTTPS;
    conn->protocol |= PROT_HTTP|PROT_HTTPS|PROT_SSL;

    conn->curl_do = Curl_http;
    conn->curl_do_more = NULL;
    conn->curl_done = Curl_http_done;
    conn->curl_connect = Curl_http_connect;

#else /* USE_SS */
    failf(data, LIBCURL_NAME
          " was built with SSL disabled, https: not supported!");
    return CURLE_UNSUPPORTED_PROTOCOL;
#endif /* !USE_SSL */
  }
  else if(strequal(conn->protostr, "FTP") ||