Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets DH_free, DSA_free, RSA_free

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Thanks to the change of mkdef.pl, a few more deprecated functions were
properly defined in util/libeay.num.

Reviewed-by: Matt Caswell <matt@openssl.org>

For the moment, this is specially crafted for DECLARE_DEPRECATED because
that's where we found the problem, but it can easily be expanded to other
types of special delarations when needed.

Reviewed-by: Matt Caswell <matt@openssl.org>

Disable loop checking when we retry verification with an alternative path.
This fixes the case where an intermediate CA is explicitly trusted and part
of the untrusted certificate list. By disabling loop checking for this case
the untrusted CA can be replaced by the explicitly trusted case and
verification will succeed.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

If a set of certificates is supplied to OCSP_basic_verify use those in
addition to any present in the OCSP response as untrusted CAs when
verifying a certificate chain.

PR#3668

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Move EVP internals to evp_int.h, remove -Ievp hack from crypto/Makefile

Reviewed-by: Matt Caswell <matt@openssl.org>

Move ASN.1 internals used across multiple directories into new internal
header file asn1_int.h remove crypto/Makefile hack which allowed other
directories to include "asn1_locl.h"

Reviewed-by: Matt Caswell <matt@openssl.org>

Start ensuring all OpenSSL "free" routines allow NULL, and remove
any if check before calling them.
This gets ASN1_OBJECT_free and ASN1_STRING_free.

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix compilation failure when SCTP is compiled due to incorrect define.

Reported-by: Conrad Kostecki <ck+gentoobugzilla@bl4ckb0x.de>
URL: https://bugs.gentoo.org/543828



RT#3758
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Thanks to a -I.., the path does work, at least on unix.  However, this
doesn't work so well on VMS.  Correcting the path to not rely on given
-I does work on both.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Remove old ASN.1 COMPAT type. This was meant as a temporary measure
so older ASN.1 code (from OpenSSL 0.9.6) still worked. It's a hack
which breaks constification and hopefully nothing uses it now, if
it ever did.

Reviewed-by: Matt Caswell <matt@openssl.org>

It was saying that it was an illegal parameter / unsupported cipher

Reviewed-by: Matt Caswell <matt@openssl.org>

The certificate already contains the DH parameters in that case.
ssl3_send_server_key_exchange() would fail in that case anyway.

Reviewed-by: Matt Caswell <matt@openssl.org>

Also removes for it being NULL

Reviewed-by: Matt Caswell <matt@openssl.org>

Remove x_exten.c and x_exten.o from crypto/asn1/Makefile: they've moved now.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix missing return value check in dtls1_listen when calling SSL_clear().

Reviewed-by: Richard Levitte <levitte@openssl.org>

Change ssl_set_handshake_header from return void to returning int, and
handle error return code appropriately.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Ensure that all libssl functions called from within the apps have their
return values checked where appropriate.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Ensure that all functions have their return values checked where
appropriate. This covers all functions defined and called from within
libssl.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Mark most functions returning a result defined in any libssl header file
with __owur to warn if they are used without checking the return value.
Use -DUNUSED_RETURN compiler flag with gcc to activate these warnings.
Some functions returning a result are skipped if it is common and valid to
use these functions without checking the return value.

Reviewed-by: Richard Levitte <levitte@openssl.org>

In order to receive warnings on unused function return values the flag
-DDEBUG_UNUSED must be passed to the compiler. This change adds that for the
--strict-warnings Configure option.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Follow up on the earlier "Do not keep TABLE in version control".
Actually removing TABLE from version control was forgotten.

Reviewed-by: Matt Caswell <matt@openssl.org>

Don't check that the curve appears in the list of acceptable curves for the
peer, if they didn't send us such a list (RFC 4492 does not require that the
extension be sent).

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Remove {i2d,d2i}_ASN1_BOOLEAN.

Rewrite single occurrence of d2i_ASN1_BOOLEAN in asn1_parse2

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove old M_ASN1_ macros and replace any occurences with the corresponding
function.

Remove d2i_ASN1_bytes, d2i_ASN1_SET, i2d_ASN1_SET: no longer used internally.

Reviewed-by: Rich Salz <rsalz@openssl.org>

In cooperation with Ard Biesheuvel (Linaro) and Sami Tolvanen (Google).

Reviewed-by: Richard Levitte <levitte@openssl.org>

Using $t is an artifact from the earlier changes in Configure and was
unfortunately forgotten as is.

Reviewed-by: Stephen Henson <steve@openssl.org>

This tests the unwrap algorithm with an invalid key. The result should
be rejected without returning any plaintext.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reviewed-by: Emilia Käsper <emilia@openssl.org>

crypto/modes/wrap128.c was heavily refactored to support AES Key Wrap
with Padding, and four bugs were introduced into CRYPTO_128_unwrap() at
that time:

- crypto_128_unwrap_raw()'s return value ('ret') is checked incorrectly,
  and the function immediately returns 'ret' in (almost) all cases.
  This makes the IV checking code later in the function unreachable, but
  callers think the IV check succeeded since CRYPTO_128_unwrap()'s
  return value is non-zero.

  FIX: Return 0 (error) if crypto_128_unwrap_raw() returned 0 (error).

- crypto_128_unwrap_raw() writes the IV to the 'got_iv' buffer, not to
  the first 8 bytes of the output buffer ('out') as the IV checking code
  expects.  This makes the IV check fail.

  FIX: Compare 'iv' to 'got_iv', not 'out'.

- The data written to the output buffer ('out') is "cleansed" if the IV
  check fails, but the code passes OPENSSL_cleanse() the input buffer
  length ('inlen') instead of the number of bytes that
  crypto_128_unwrap_raw() wrote to the output buffer ('ret').  This
  means that OPENSSL_cleanse() could potentially write past the end of
  'out'.

  FIX: Change 'inlen' to 'ret' in the OPENSSL_cleanse() call.

- CRYPTO_128_unwrap() is returning the length of the input buffer
  ('inlen') instead of the number of bytes written to the output buffer
  ('ret').  This could cause the caller to read past the end of 'out'.

  FIX: Return 'ret' instead of 'inlen' at the end of the function.

PR#3749

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>