- 03 Aug, 2017 4 commits
-
-
Johannes Bauer authored
This was previously mistakenly handled as a single error code. Reviewed-by:
Paul Dale <paul.dale@oracle.com> Reviewed-by:
Stephen Henson <steve@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3989)
-
Johannes Bauer authored
Changed HKDF to use EVP_PKEY_CTX_md() (review comment of @snhenson) and introduced more specific error codes (not only indicating *that* some parameter is missing, but actually *which* one it is). Reviewed-by:
-
Johannes Bauer authored
HKDF now handles an invalid digest like TLS1-PRF does (i.e., returns KDF_R_INVALID_DIGEST if the passed digest is not known). Both KDFs now set the error code KDF_R_UNKNOWN_PARAMETER_TYPE if a type was passed that is not recognized. This will have the effect of improving debugging output in case a user uses "openssl pkeyutl -kdf ..." in a wrong way and result in an actual error code (instead of just "failure" and an empty error stack). Reviewed-by:
-
Johannes Bauer authored
Introduce KDF_F_PKEY_HKDF_DERIVE and return the KDF_R_MISSING_PARAMETER error code when required parameters have not been set. This will make "openssl pkeyutl -kdf HKDF" return a meaningful error message instead of simply "Public Key operation error". Reviewed-by:
-
- 02 Aug, 2017 2 commits
-
-
Andy Polyakov authored
This is achieved mostly by ~10% reduction of amount of instructions per round thanks to a) switch to KECCAK_2X variant; b) merge of almost 1/2 rotations with logical instructions. Performance is improved on all observed processors except on Cortex-A15. This is because it's capable of exploiting more parallelism and can execute original code for same amount of time. Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/4057)
-
Pauli authored
Removing the use of SETUP_TEST_FIXTURE reduces complxity in those tests that used it. Reviewed-by:
Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4066)
-
- 01 Aug, 2017 10 commits
-
-
Martin Peylo authored
The OID for {1 3 6 1 5 5 8 1 2} HMAC-SHA1 (NID_hmac_sha1) is explicitly referenced by RFC 2510, RFC 3370, and RFC 4210. This is essential for the common implementations of CMP (Certificate Managing Protocol, RFC4210). HMAC-MD5's OID {1 3 6 1 5 5 8 1 1} (NID_hmac_md5) is in the same branch and it seems to generally exist (-> Internet search), but it is unclear where it is actually defined as it appears not to be referenced by RFCs and practically rather unused. Those OIDs are both duplicates to OIDs from an RSA OID branch, which are already included in builtin_pbe[]: HMAC-SHA1 also has another OID defined in PKCS#5/RFC2898 (NID_hmacWithSHA1). It is also unclear where the other OID for HMAC-MD5 (NID_hmacWithMD5) from the RSA branch is officially specified, as only HMAC-SHA1 from PKCS#5 was found to be defined. Anyway, HMAC-MD5 likely only plays a neglectable role in the future. Reviewed-by: -
Pauli authored
Simplify the only test that uses this macro so it doesn't need it anymore. Clean up the formatting a little. Reviewed-by:
-
Andy Polyakov authored
"More" refers to the fact that we make active BIT_INTERLEAVE choice in some specific cases. Update commentary correspondingly. Reviewed-by: -
Andy Polyakov authored
Even though tm->length >= 15 && v[14] == '.' works in practice, [because "YYYYMMDDHHMMSS." would be rejected as invalid by asn1_time_to_tm,] formal correctness with respect to buffer overstep in few lines vicinity improves readability. [Also fold one if condition and improve expression readability.] Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4058)
-
Paul Yang authored
Reviewed-by:
-
Paul Yang authored
Seems this documentation is not dead, so add this missing part Reviewed-by:
-
Ken Goldman authored
Document that the RSA_get0_ functions permit a NULL BIGNUM **. Those output parameters are ignored. Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4064)
-
Matt Caswell authored
In TLSv1.3 we can resume, but still get a new session. This adds a test to make sure that is happening. Reviewed-by:
Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/4068)
-
Matt Caswell authored
If a new_session_cb is set then it was only ever getting invoked if !s->hit is true. This is sensible for <=TLSv1.2 but does not work for TLSv1.3. Fixes #4045 Reviewed-by:
-
Paul Yang authored
This is to address issue #3932. Support comma-separated string to specify what extensions to be displayed. Reviewed-by:
-
- 31 Jul, 2017 11 commits
-
-
Xiaoyin Liu authored
I scanned all files in the doc folder with a spell checker (https://github.com/EWSoftware/VSSpellChecker ). This patch (hopefully) corrected all spell errors that it found. Reviewed-by:
Tim Hudson <tjh@openssl.org> Reviewed-by:
-
Bernd Edlinger authored
The memory blocks contain secret data and must be cleared before returning to the system heap. Reviewed-by:
-
Todd Short authored
Some extensions were being displayed twice, before they were parsed, and again after they were parsed. The supported_versions extension was not being fully displayed, as it was processed differently than other extensions. Move the debug callback to where the extensions are first collected, to catch all the extensions as they come in, so they are ordered correctly. Reviewed-by:
-
David Benjamin authored
The names of these ciphers have an "SSL_" prefix, but the RFC names use "TLS_": https://www.iana.org/assignments/tls-parameters/tls-parameters.xhtml#tls-parameters-4 This dates back to these ciphers being originally defined in SSLv3. As SSLv3 is on its way out anyway and this is a new set of APIs, consistently use the TLS names. Reviewed-by:
-
Xiaoyin Liu authored
TLS_ST_SR_NEXT_PROTO means "SSLv3/TLS read next proto" Fix typo in the message for TLS_ST_SW_CERT_STATUS Reviewed-by:
-
Xiaoyin Liu authored
I think it's better to use `GetFileAttributes` to obtain the attributes of a file than `FindFirstFile`. If the input name contains `*`, this function should return failure rather than check whether the first match happens to be a file or a directory. Reviewed-by:
-
Andy Polyakov authored
Reviewed-by: -
Andy Polyakov authored
Reviewed-by: -
Andy Polyakov authored
[And move misplaced macros.] Reviewed-by: -
Xiaoyin Liu authored
Reviewed-by:
-
Paul Yang authored
Check time string format before parsing Reduce more duplicated code By involving asn1_time_to_tm, we can now get information we mostly need to print a time string. This follows what was discussed at https://github.com/openssl/openssl/pull/4001#discussion_r129092251 Reviewed-by:
-
- 30 Jul, 2017 6 commits
-
-
Xiaoyin Liu authored
Reviewed-by:
-
Xiaoyin Liu authored
Reviewed-by:
-
Paul Yang authored
To state the fractional seconds part will be lost in the conversion. Reviewed-by:
-
Xiaoyin Liu authored
Reviewed-by:
-
Xiaoyin Liu authored
Remove the function prototypes for ssl_cert_get0_next_certificate, ssl_set_default_md, tls1_shared_list, dtls1_send_newsession_ticket, tls1_ctrl, and tls1_callback_ctrl, all of which are not defined. It also changed the signature of the function pqueue_next to `pitem *pqueue_next(piterator *item)` in pqueue.c, making it match the prototype in ssl_locl.h. (`piterator *` is equivalent to `pitem **`.) Reviewed-by:
-
Xiaoyin Liu authored
This patch removes the prototype of function RECORD_LAYER_set_write_sequence from record_locl.h, since this function is not defined. Reviewed-by:
-
- 29 Jul, 2017 7 commits
-
-
Dr. Stephen Henson authored
Reviewed-by:
-
Dr. Stephen Henson authored
Reviewed-by:
-
Dr. Stephen Henson authored
Add functions to enumerate public key methods. Add test to ensure table is in the correct order. Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
