- Nov 23, 2018
-
-
Richard Levitte authored
Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7692) (cherry picked from commit 8d9535ec3e317641b8e551973c8cfe2ee1c89296)
-
Richard Levitte authored
Since recently, OpenSSL tarballs are produced with 'make tar' rather than 'make dist', as the latter has turned out to be more troublesome than useful. The next step to look at is why we would need to configure at all to produce a Makefile just to produce a tarball. After all, the tarball should now only contain source files that are present even without configuring. Furthermore, the current method for producing tarballs is a bit complex, and can be greatly simplified with the right tools. Since we have everything versioned with git, we might as well use the tool that comes with it. Added: util/mktar.sh, a simple script to produce OpenSSL tarballs. It takes the options --name to modify the prefix of the distribution, and --tarfile tp modify the tarball file name specifically. This also adds a few entries in .gitattributes to specify files that should never end up in a distribution tarball. Reviewed-by:
-
Richard Levitte authored
This ensures we collected them properly and and as completely as can be tested safely. Reviewed-by:
-
Richard Levitte authored
We stored copies of the system error texts in a fixed line size array, which is a huge waste. Instead, use a static memory pool and pack all the string in there. The wasted space at the end, if any, gives us some leeway for longer strings than we have measured so far. Reviewed-by:
-
- Nov 22, 2018
-
-
Andy Polyakov authored
Blinding is performed more efficiently and securely if MONT_CTX for public modulus is available by the time blinding parameter are instantiated. So make sure it's the case. Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7586) (cherry picked from commit 2cc3f68cde77af23c61fbad65470602ee86f2575)
-
- Nov 21, 2018
-
-
Matthew Hodgson authored
Fixes #7675 On macOS, if you call `connect()` on a UDP socket you cannot then call `sendto()` with a destination, otherwise it fails with Err#56 ('socket is already connected'). By calling `BIO_ctrl_set_connected()` on the wbio we can tell it that the socket has been connected and make it call `send()` rather than `sendto()`. Reviewed-by:Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/7676) (cherry picked from commit b92678f4e94eeec468f194333f874906a6fff7f1)
-
Paul Yang authored
This fixes issue #7677 Reviewed-by:
-
- Nov 20, 2018
-
-
cclauss authored
CLA: trivial In Travis CI, add a Python linting step that runs flake8 tests in Travis CI to find syntax errors and undefined names. (http://flake8.pycqa.org ) __E901,E999,F821,F822,F823__ are the "_showstopper_" flake8 issues that can halt the runtime with a SyntaxError, NameError, etc. Most other flake8 issues are merely "style violations" -- useful for readability but they do not effect runtime safety. * F821: undefined name `name` * F822: undefined name `name` in `__all__` * F823: local variable name referenced before assignment * E901: SyntaxError or IndentationError * E999: SyntaxError -- failed to compile a file into an Abstract Syntax Tree Reviewed-by:
Paul Dale <paul.dale@oracle.com> Reviewed-by:
-
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/7664)
-
- Nov 19, 2018
-
-
Richard Levitte authored
Without this precaution, we end up having directory targets depend on shlib object files for which there are no rules. Reviewed-by:
Tim Hudson <tjh@openssl.org> Reviewed-by:
-
Richard Levitte authored
Mingw and Cygwin builds install the DLLs in the application directory, not the library directory, so ensure that one is created for them when installing the DLLs. Fixes #7653 Reviewed-by:
-
- Nov 16, 2018
-
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
-
- Nov 15, 2018
-
-
Richard Levitte authored
Fixes #7641 [extended tests] Reviewed-by:
-
- Nov 14, 2018
-
-
Vitezslav Cizek authored
dsa_builtin_paramgen2 expects the L parameter to be greater than N, otherwise the generation will get stuck in an infinite loop. Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
- Nov 13, 2018
-
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
We therefore must add defaults. Reviewed-by:
Viktor Dukhovni <viktor@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7626) (cherry picked from commit 45cdae1c7c93fe7ef2a981da4c36c3b8cb09e855)
-
Richard Levitte authored
When libssl and libcrypto are compiled on Linux with "-rpath", but not "--enable-new-dtags", the RPATH takes precedence over LD_LIBRARY_PATH, and we end up running with the wrong libraries. This is resolved by using full (or at least relative, rather than just the filename to be found on LD_LIBRARY_PATH) paths to the shared objects. Reviewed-by:
-
Richard Levitte authored
Fixes #7634 Reviewed-by:
-
- Nov 12, 2018
-
-
Viktor Dukhovni authored
SSL_get_signature_nid() -- local signature algorithm SSL_get_signature_type_nid() -- local signature algorithm key type SSL_get_peer_tmp_key() -- Peer key-exchange public key SSL_get_tmp_key -- local key exchange public key Aliased pre-existing SSL_get_server_tmp_key(), which was formerly just for clients, to SSL_get_peer_tmp_key(). Changed internal calls to use the new name. Reviewed-by: -
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
SSL(_CTX)?_set_client_CA_list() was a server side only function in 1.1.0. If it was called on the client side then it was ignored. In 1.1.1 it now makes sense to have a CA list defined for both client and server (the client now sends it the the TLSv1.3 certificate_authorities extension). Unfortunately some applications were using the same SSL_CTX for both clients and servers and this resulted in some client ClientHellos being excessively large due to the number of certificate authorities being sent. This commit seperates out the CA list updated by SSL(_CTX)?_set_client_CA_list() and the more generic SSL(_CTX)?_set0_CA_list(). This means that SSL(_CTX)?_set_client_CA_list() still has no effect on the client side. If both CA lists are set then SSL(_CTX)?_set_client_CA_list() takes priority. Fixes #7411 Reviewed-by:
-
Richard Levitte authored
Just refering to a hash table element as an array reference will automatically create that element. Avoid that by defaulting to a separate empty array reference. Fixes #7543 Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
TLSv1.3 is more restrictive about the curve used. There must be a matching sig alg defined for that curve. Therefore if we are using some other curve in our certificate then we should not negotiate TLSv1.3. Fixes #7435 Reviewed-by:
-
Richard Levitte authored
Setting the SipHash hash size and setting its key is done with two independent functions... and yet, the internals depend on both. Unfortunately, the function to change the size wasn't adapted for the possibility that the key was set first, with a different hash size. This changes the hash setting function to fix the internal values (which is easy, fortunately) according to the hash size. evpmac.txt value for digestsize:8 is also corrected. Reviewed-by:
-
- Nov 10, 2018
-
-
Tomas Mraz authored
Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> Reviewed-by:
-
Mansour Ahmadi authored
Reviewed-by:
Paul Yang <yang.yang@baishancloud.com> Reviewed-by:
-
Billy Brumley authored
Reviewed-by:
-
- Nov 09, 2018
-
-
Bernd Edlinger authored
Fixes #7022 Reviewed-by:
-
Richard Levitte authored
... otherwise, it's taken to be part of a device name. Reviewed-by:
-
Richard Levitte authored
We only had the main 'install' target depend on 'all'. This changes the dependencies so targets like install_dev, install_runtime_libs, install_engines and install_programs depend on build targets that are correspond to them more specifically. This increases the parallel possibilities. Fixes #7466 Reviewed-by:
-
Richard Levitte authored
When trying 'make -j{n} install', you may occasionally run into trouble because to sub-targets (install_dev and install_runtime) try to install the same shared libraries. That makes parallel install difficult. This is solved by dividing install_runtime into two parts, one for libraries and one for programs, and have install_dev depend on install_runtime_libs instead of installing the shared runtime libraries itself. Fixes #7466 Reviewed-by: -
Paul Yang authored
[skip-ci] Reviewed-by:
-
