Resolves GH1515 and GH1509.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 7d959c35)

The internal SRP function t_fromb64() converts from base64 to binary. It
does not validate that the size of the destination is sufficiently large -
that is up to the callers. In some places there was such a check, but not
in others.

Add an argument to t_fromb64() to provide the size of the destination
buffer and validate that we don't write too much data. Also add some sanity
checks to the callers where appropriate.

With thanks to Shi Lei for reporting this issue.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 73f0df83)

Also, enlarge test group 20 to include openssl commands that aren't
tested otherwise

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 497f3bf9)

RT#4674

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 9f9f962d)

This flag got moved after -xarch=v9 in 1.1.0 and had the unexpected
side effect of the compiler building for 32-bit v8plusa instead of v9.

GH#1521
CLA: none; trivial

Signed-off-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit fa4618a2)

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1520)
(cherry picked from commit c2efa783)

it appears when using gcc/mingw:
```
apps/s_client.c:815:9: warning: variable 'at_eof' set but not used [-Wunused-but-set-variable]
     int at_eof = 0;
         ^~~~~~
```
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1512)
(cherry picked from commit d485640b)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 35c11bfc)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cc2cb7bf)

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 6462876f)

A peer continually sending unrecognised warning alerts could mean that we
make no progress on a connection. We should abort rather than continuing if
we receive an unrecognised warning alert.

Thanks to Shi Lei for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 77a6be4d)

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit cdbbf990)

even when the public key is not present in an EC_KEY

Reviewed-by: Stephen Henson <steve@openssl.org>
(cherry picked from commit 82f52631)

VMS sets that errno when the device part of a file spec is malformed
or a logical name that doesn't exist.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit e82e2186)

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 047a5da2)

Certain functions are automatically called during auto-deinit in order
to deallocate resources. However, if we have never entered a function which
marks lib crypto as inited then they never get called. This can happen if
the user only ever makes use of a small sub-set of functions that don't hit
the auto-init code.

This commit ensures all such resources deallocated by these functions also
init libcrypto when they are initially allocated.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>
(cherry picked from commit 135648bc)

Using the -trace option to s_server or s_client was incorrectly printing
UNKNOWN for the X25519 curve.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2d11f5b2)

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 4e399729)

Improve interchangeability of aix*-gcc targets by linking shared
libraries with -static-libgcc, and address linking problems with
vendor compiler.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit f780eaad)

RT#4667

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit abcbf7ed)

Found by turning -Wswitch-enum on.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 252cfef1)

The background story is that util/shlib_wrap.sh was setting LD_PRELOAD
or similar platform dependent variables, just in case the shared
libraries were built with -rpath.  Unfortunately, this doesn't work
too well with asan, msan or ubsan.

So, the solution is to forbid the combination of shared libraries,
-rpath and any of the sanity analyzers we can configure.

This changes util/shlib_wrap.sh so it only contains the code that sets
LD_PRELOAD when -rpath has been used when configuring.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 342a1a23)

Some hardware devices don't provide the public EC_POINT data. The only
way for X509_check_private_key() to validate that the key matches a
given certificate is to actually perform a sign operation and then
verify it using the public key in the certificate.

Maybe that can come later, as discussed in issue 1532. But for now let's
at least make it fail gracefully and not crash.

GH: 1532

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1547)

The way we figured out what options are crypto algorithms and what are
something other was somewhat sketchy.  This change bases the
distinction on available sdirs instead.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 3e2dd30d)

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d65c3615)

Never output -0; make "negative zero" an impossibility.
Do better checking on BN_rand top/bottom requirements and #bits.
Update doc.
Ignoring trailing garbage in BN_asc2bn.

Port this commit from boringSSL: https://boringssl.googlesource.com/boringssl/+/899b9b19a4cd3fe526aaf5047ab9234cdca19f7d%5E!/


        Ensure |BN_div| never gives negative zero in the no_branch code.

        Have |bn_correct_top| fix |bn->neg| if the input is zero so that we
        don't have negative zeros lying around.

        Thanks to Brian Smith for noticing.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 01c09f9f)

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 77a42b5f)

In the case of using an independent makedepend, we had split that into
two separate recipes, one depending on the other.  However, there are
cases where the makedepend recipe was always trying, but doesn't
update the time stamp of the .d file because there are no actual
changes, and thereby causing constant updates of the object files.

This change makes one recipe that takes care of both makedepend och
cc, thereby avoiding these extra updates.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 7e5b8b93)

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6cf412c4)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d5a39c12)

Since vendor assembler can't assemble our modules with -KPIC flag,
it, assembly support, was not available as an option. But this
means lack of side-channel resistant code, which is incompatible
with security by todays standards.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 216a0cc4)

This adheres much better to the documentation in test/README

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 377ab6d1)

This reverts commit 7f9ae888

.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 967e831e)

This reverts commit eb40eaed

.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit a5e1f123)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 7f9ae888)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit ed43fe73)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit bf98d9da)

Because some targets execute perl code that might die, we risk
incomplete lists.  Make it so dying doesn't happen when we're listing
targets.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d63c12c6)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0c0d78b8)

These tests take a very long time on some platforms, and arent't
always strictly necessary.  This makes it possible to turn them
off.  The necessary binaries are still built, though, in case
someone still wants to do a manual run.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit eb40eaed)