Skip to content
gtls.c 46.5 KiB
Newer Older
/***************************************************************************
 *                                  _   _ ____  _
 *  Project                     ___| | | |  _ \| |
 *                             / __| | | | |_) | |
 *                            | (__| |_| |  _ <| |___
 *                             \___|\___/|_| \_\_____|
 *
 * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
 *
 * This software is licensed as described in the file COPYING, which
 * you should have received as part of this distribution. The terms
 * are also available at http://curl.haxx.se/docs/copyright.html.
 *
 * You may opt to use, copy, modify, merge, publish, distribute and/or sell
 * copies of the Software, and permit persons to whom the Software is
 * furnished to do so, under the terms of the COPYING file.
 *
 * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
 * KIND, either express or implied.
 *
 ***************************************************************************/

/*
 * Source file for all GnuTLS-specific code for the TLS/SSL layer. No code
 * but vtls.c should ever call or use these functions.
 *
 * Note: don't use the GnuTLS' *_t variable type names in this source code,
 * since they were not present in 1.0.X.
 */

#include "curl_setup.h"
#include <gnutls/abstract.h>
#include <gnutls/gnutls.h>
#include <gnutls/x509.h>
#ifdef USE_GNUTLS_NETTLE
#include <gnutls/crypto.h>
#include <nettle/md5.h>
#else
#include "urldata.h"
#include "sendf.h"
#include "inet_pton.h"
#include "gtls.h"
#include "vtls.h"
#include "parsedate.h"
#include "connect.h" /* for the connect timeout */
#include "select.h"
#include "rawstr.h"
#include "warnless.h"
#include "x509asn1.h"
#include "curl_printf.h"
#include "curl_memory.h"
/* The last #include file should be: */
#include "memdebug.h"
/*
 Some hackish cast macros based on:
 http://library.gnome.org/devel/glib/unstable/glib-Type-Conversion-Macros.html
*/
#ifndef GNUTLS_POINTER_TO_INT_CAST
#define GNUTLS_POINTER_TO_INT_CAST(p) ((int) (long) (p))
#endif
#ifndef GNUTLS_INT_TO_POINTER_CAST
#define GNUTLS_INT_TO_POINTER_CAST(i) ((void*) (long) (i))
#endif

/* Enable GnuTLS debugging by defining GTLSDEBUG */
/*#define GTLSDEBUG */

#ifdef GTLSDEBUG
static void tls_log_func(int level, const char *str)
{
    fprintf(stderr, "|<%d>| %s", level, str);
}
#endif
#if defined(GNUTLS_VERSION_NUMBER)
#  if (GNUTLS_VERSION_NUMBER >= 0x020c00)
#    undef gnutls_transport_set_lowat
#    define gnutls_transport_set_lowat(A,B) Curl_nop_stmt
#    define USE_GNUTLS_PRIORITY_SET_DIRECT 1
#  if (GNUTLS_VERSION_NUMBER >= 0x020c03)
#    define GNUTLS_MAPS_WINSOCK_ERRORS 1
#  if (GNUTLS_VERSION_NUMBER >= 0x030200)
#    define HAS_ALPN
Fabian Frank's avatar
Fabian Frank committed
#  endif

#  if (GNUTLS_VERSION_NUMBER >= 0x03020d)
#    define HAS_OCSP
#  endif

#  if (GNUTLS_VERSION_NUMBER >= 0x030306)
#    define HAS_CAPATH
#  endif
#endif

#ifdef HAS_OCSP
# include <gnutls/ocsp.h>
/*
 * Custom push and pull callback functions used by GNU TLS to read and write
 * to the socket.  These functions are simple wrappers to send() and recv()
 * (although here using the sread/swrite macros as defined by
 * curl_setup_once.h).
 * We use custom functions rather than the GNU TLS defaults because it allows
 * us to get specific about the fourth "flags" argument, and to use arbitrary
 * private data with gnutls_transport_set_ptr if we wish.
 * When these custom push and pull callbacks fail, GNU TLS checks its own
 * session-specific error variable, and when not set also its own global
 * errno variable, in order to take appropriate action. GNU TLS does not
 * require that the transport is actually a socket. This implies that for
 * Windows builds these callbacks should ideally set the session-specific
 * error variable using function gnutls_transport_set_errno or as a last
 * resort global errno variable using gnutls_transport_set_global_errno,
 * with a transport agnostic error value. This implies that some winsock
 * error translation must take place in these callbacks.
 *
 * Paragraph above applies to GNU TLS versions older than 2.12.3, since
 * this version GNU TLS does its own internal winsock error translation
 * using system_errno() function.
#if defined(USE_WINSOCK) && !defined(GNUTLS_MAPS_WINSOCK_ERRORS)
#  define gtls_EINTR  4
#  define gtls_EIO    5
#  define gtls_EAGAIN 11
static int gtls_mapped_sockerrno(void)
  case WSAEWOULDBLOCK:
static ssize_t Curl_gtls_push(void *s, const void *buf, size_t len)
{
  ssize_t ret = swrite(GNUTLS_POINTER_TO_INT_CAST(s), buf, len);
#if defined(USE_WINSOCK) && !defined(GNUTLS_MAPS_WINSOCK_ERRORS)
  if(ret < 0)
    gnutls_transport_set_global_errno(gtls_mapped_sockerrno());
}

static ssize_t Curl_gtls_pull(void *s, void *buf, size_t len)
{
  ssize_t ret = sread(GNUTLS_POINTER_TO_INT_CAST(s), buf, len);
#if defined(USE_WINSOCK) && !defined(GNUTLS_MAPS_WINSOCK_ERRORS)
  if(ret < 0)
    gnutls_transport_set_global_errno(gtls_mapped_sockerrno());
/* Curl_gtls_init()
 *
 * Global GnuTLS init, called from Curl_ssl_init(). This calls functions that
 * are not thread-safe and thus this function itself is not thread-safe and
 * must only be called from within curl_global_init() to keep the thread
 * situation under control!
Daniel Stenberg's avatar
Daniel Stenberg committed
  if(!gtls_inited) {
    gnutls_global_set_log_function(tls_log_func);
    gnutls_global_set_log_level(2);
  return 1;
}

static void showtime(struct SessionHandle *data,
                     const char *text,
                     time_t stamp)
{
  struct tm buffer;
  const struct tm *tm = &buffer;
  CURLcode result = Curl_gmtime(stamp, &buffer);
  if(result)
    return;

           "\t %s: %s, %02d %s %4d %02d:%02d:%02d GMT",
           text,
           Curl_wkday[tm->tm_wday?tm->tm_wday-1:6],
           tm->tm_mday,
           Curl_month[tm->tm_mon],
           tm->tm_year + 1900,
           tm->tm_hour,
           tm->tm_min,
           tm->tm_sec);
  infof(data, "%s\n", data->state.buffer);
static gnutls_datum_t load_file (const char *file)
  gnutls_datum_t loaded_file = { NULL, 0 };
  if(!(f = fopen(file, "r")))
  if(fseek(f, 0, SEEK_END) != 0
     || (filelen = ftell(f)) < 0
     || fseek(f, 0, SEEK_SET) != 0
     || !(ptr = malloc((size_t)filelen)))
  if(fread(ptr, 1, (size_t)filelen, f) < (size_t)filelen) {
  }

  loaded_file.data = ptr;
  loaded_file.size = (unsigned int)filelen;
static void unload_file(gnutls_datum_t data) {
/* this function does a SSL/TLS (re-)handshake */
static CURLcode handshake(struct connectdata *conn,
                          int sockindex,
                          bool duringconnect,
                          bool nonblocking)
{
  struct SessionHandle *data = conn->data;
  struct ssl_connect_data *connssl = &conn->ssl[sockindex];
  gnutls_session_t session = conn->ssl[sockindex].session;
  curl_socket_t sockfd = conn->sock[sockindex];
  long timeout_ms;
Yang Tse's avatar
Yang Tse committed
  for(;;) {
    /* check allowed time left */
    timeout_ms = Curl_timeleft(data, NULL, duringconnect);
    if(timeout_ms < 0) {
      /* no need to continue if time already is up */
      failf(data, "SSL connection timeout");
      return CURLE_OPERATION_TIMEDOUT;
    }
    /* if ssl is expecting something, check if it's available. */
    if(connssl->connecting_state == ssl_connect_2_reading
       || connssl->connecting_state == ssl_connect_2_writing) {

      curl_socket_t writefd = ssl_connect_2_writing==
        connssl->connecting_state?sockfd:CURL_SOCKET_BAD;
      curl_socket_t readfd = ssl_connect_2_reading==
        connssl->connecting_state?sockfd:CURL_SOCKET_BAD;

      what = Curl_socket_ready(readfd, writefd,
                               nonblocking?0:
                               timeout_ms?timeout_ms:1000);
      if(what < 0) {
        /* fatal error */
Yang Tse's avatar
Yang Tse committed
        failf(data, "select/poll on SSL socket, errno: %d", SOCKERRNO);
      else if(0 == what) {
        else if(timeout_ms) {
          failf(data, "SSL connection timeout at %ld", timeout_ms);
          return CURLE_OPERATION_TIMEDOUT;
        }
      }
      /* socket is readable or writable */
    rc = gnutls_handshake(session);
    if((rc == GNUTLS_E_AGAIN) || (rc == GNUTLS_E_INTERRUPTED)) {
      connssl->connecting_state =
        gnutls_record_get_direction(session)?
        ssl_connect_2_writing:ssl_connect_2_reading;
    else if((rc < 0) && !gnutls_error_is_fatal(rc)) {
      const char *strerr = NULL;

      if(rc == GNUTLS_E_WARNING_ALERT_RECEIVED) {
        int alert = gnutls_alert_get(session);
        strerr = gnutls_alert_get_name(alert);
      }

      if(strerr == NULL)
        strerr = gnutls_strerror(rc);

      failf(data, "gnutls_handshake() warning: %s", strerr);
      const char *strerr = NULL;

      if(rc == GNUTLS_E_FATAL_ALERT_RECEIVED) {
        int alert = gnutls_alert_get(session);
        strerr = gnutls_alert_get_name(alert);
      }

      if(strerr == NULL)
        strerr = gnutls_strerror(rc);

      failf(data, "gnutls_handshake() failed: %s", strerr);
      return CURLE_SSL_CONNECT_ERROR;
    }

    /* Reset our connect state machine */
    connssl->connecting_state = ssl_connect_1;
    return CURLE_OK;
static gnutls_x509_crt_fmt_t do_file_type(const char *type)
{
  if(!type || !type[0])
    return GNUTLS_X509_FMT_PEM;
static CURLcode
gtls_connect_step1(struct connectdata *conn,
                   int sockindex)
  gnutls_session_t session;
  int rc;
  void *ssl_sessionid;
  size_t ssl_idsize;
  bool sni = TRUE; /* default is SNI enabled */
#ifdef ENABLE_IPV6
  struct in6_addr addr;
#else
  struct in_addr addr;
#endif
#ifndef USE_GNUTLS_PRIORITY_SET_DIRECT
  static const int cipher_priority[] = {
  /* These two ciphers were added to GnuTLS as late as ver. 3.0.1,
     but this code path is only ever used for ver. < 2.12.0.
     GNUTLS_CIPHER_AES_128_GCM,
     GNUTLS_CIPHER_AES_256_GCM,
  */
    GNUTLS_CIPHER_AES_128_CBC,
    GNUTLS_CIPHER_AES_256_CBC,
    GNUTLS_CIPHER_CAMELLIA_128_CBC,
    GNUTLS_CIPHER_CAMELLIA_256_CBC,
    GNUTLS_CIPHER_3DES_CBC,
  };
  static const int cert_type_priority[] = { GNUTLS_CRT_X509, 0 };
  static int protocol_priority[] = { 0, 0, 0, 0 };
#else
#define GNUTLS_CIPHERS "NORMAL:-ARCFOUR-128:-CTYPE-ALL:+CTYPE-X509"
/* If GnuTLS was compiled without support for SRP it will error out if SRP is
   requested in the priority string, so treat it specially
 */
#define GNUTLS_SRP "+SRP"
  const char* prioritylist;
  if(conn->ssl[sockindex].state == ssl_connection_complete)
    /* to make us tolerant against being called more than once for the
       same connection */
    return CURLE_OK;

  /* GnuTLS only supports SSLv3 and TLSv1 */
  if(data->set.ssl.version == CURL_SSLVERSION_SSLv2) {
    failf(data, "GnuTLS does not support SSLv2");
    return CURLE_SSL_CONNECT_ERROR;
  }
  else if(data->set.ssl.version == CURL_SSLVERSION_SSLv3)
    sni = FALSE; /* SSLv3 has no SNI */

  /* allocate a cred struct */
  rc = gnutls_certificate_allocate_credentials(&conn->ssl[sockindex].cred);
    failf(data, "gnutls_cert_all_cred() failed: %s", gnutls_strerror(rc));
#ifdef USE_TLS_SRP
  if(data->set.ssl.authtype == CURL_TLSAUTH_SRP) {
    infof(data, "Using TLS-SRP username: %s\n", data->set.ssl.username);

    rc = gnutls_srp_allocate_client_credentials(
           &conn->ssl[sockindex].srp_client_cred);
    if(rc != GNUTLS_E_SUCCESS) {
      failf(data, "gnutls_srp_allocate_client_cred() failed: %s",
            gnutls_strerror(rc));
      return CURLE_OUT_OF_MEMORY;
    rc = gnutls_srp_set_client_credentials(conn->ssl[sockindex].
                                           srp_client_cred,
                                           data->set.ssl.username,
                                           data->set.ssl.password);
    if(rc != GNUTLS_E_SUCCESS) {
      failf(data, "gnutls_srp_set_client_cred() failed: %s",
            gnutls_strerror(rc));
      return CURLE_BAD_FUNCTION_ARGUMENT;
  if(data->set.ssl.CAfile) {
    /* set the trusted CA cert bundle file */
    gnutls_certificate_set_verify_flags(conn->ssl[sockindex].cred,
                                        GNUTLS_VERIFY_ALLOW_X509_V1_CA_CRT);

    rc = gnutls_certificate_set_x509_trust_file(conn->ssl[sockindex].cred,
                                                data->set.ssl.CAfile,
                                                GNUTLS_X509_FMT_PEM);
      infof(data, "error reading ca cert file %s (%s)\n",
            data->set.ssl.CAfile, gnutls_strerror(rc));
Daniel Stenberg's avatar
Daniel Stenberg committed
      if(data->set.ssl.verifypeer)
    else
      infof(data, "found %d certificates in %s\n",
            rc, data->set.ssl.CAfile);
#ifdef HAS_CAPATH
  if(data->set.ssl.CApath) {
    /* set the trusted CA cert directory */
    rc = gnutls_certificate_set_x509_trust_dir(conn->ssl[sockindex].cred,
                                                data->set.ssl.CApath,
                                                GNUTLS_X509_FMT_PEM);
    if(rc < 0) {
      infof(data, "error reading ca cert file %s (%s)\n",
            data->set.ssl.CAfile, gnutls_strerror(rc));
      if(data->set.ssl.verifypeer)
        return CURLE_SSL_CACERT_BADFILE;
    }
    else
      infof(data, "found %d certificates in %s\n",
            rc, data->set.ssl.CApath);
  }
#endif

  if(data->set.ssl.CRLfile) {
    /* set the CRL list file */
    rc = gnutls_certificate_set_x509_crl_file(conn->ssl[sockindex].cred,
                                              data->set.ssl.CRLfile,
                                              GNUTLS_X509_FMT_PEM);
      failf(data, "error reading crl file %s (%s)",
            data->set.ssl.CRLfile, gnutls_strerror(rc));
      return CURLE_SSL_CRL_BADFILE;
    }
    else
      infof(data, "found %d CRL in %s\n",
            rc, data->set.ssl.CRLfile);
  }

  /* Initialize TLS session as a client */
  rc = gnutls_init(&conn->ssl[sockindex].session, GNUTLS_CLIENT);
    failf(data, "gnutls_init() failed: %d", rc);
    return CURLE_SSL_CONNECT_ERROR;
  }

  /* convenient assign */
  session = conn->ssl[sockindex].session;

  if((0 == Curl_inet_pton(AF_INET, conn->host.name, &addr)) &&
     (0 == Curl_inet_pton(AF_INET6, conn->host.name, &addr)) &&
     sni &&
     (gnutls_server_name_set(session, GNUTLS_NAME_DNS, conn->host.name,
                             strlen(conn->host.name)) < 0))
    infof(data, "WARNING: failed to configure server name indication (SNI) "
          "TLS extension\n");

  /* Use default priorities */
  rc = gnutls_set_default_priority(session);
#ifndef USE_GNUTLS_PRIORITY_SET_DIRECT
  rc = gnutls_cipher_set_priority(session, cipher_priority);
  if(rc != GNUTLS_E_SUCCESS)
    return CURLE_SSL_CONNECT_ERROR;
  /* Sets the priority on the certificate types supported by gnutls. Priority
   is higher for types specified before others. After specifying the types
   you want, you must append a 0. */
  rc = gnutls_certificate_type_set_priority(session, cert_type_priority);

  if(data->set.ssl.cipher_list != NULL) {
    failf(data, "can't pass a custom cipher list to older GnuTLS"
          " versions");
    return CURLE_SSL_CONNECT_ERROR;
  }

  switch (data->set.ssl.version) {
    case CURL_SSLVERSION_SSLv3:
      protocol_priority[0] = GNUTLS_SSL3;
      break;
    case CURL_SSLVERSION_DEFAULT:
    case CURL_SSLVERSION_TLSv1:
      protocol_priority[0] = GNUTLS_TLS1_0;
      protocol_priority[1] = GNUTLS_TLS1_1;
      protocol_priority[2] = GNUTLS_TLS1_2;
      break;
    case CURL_SSLVERSION_TLSv1_0:
      protocol_priority[0] = GNUTLS_TLS1_0;
      break;
    case CURL_SSLVERSION_TLSv1_1:
      protocol_priority[0] = GNUTLS_TLS1_1;
      break;
    case CURL_SSLVERSION_TLSv1_2:
      protocol_priority[0] = GNUTLS_TLS1_2;
    break;
      case CURL_SSLVERSION_SSLv2:
    default:
      failf(data, "GnuTLS does not support SSLv2");
      return CURLE_SSL_CONNECT_ERROR;
      break;
  }
  rc = gnutls_protocol_set_priority(session, protocol_priority);
  if(rc != GNUTLS_E_SUCCESS) {
    failf(data, "Did you pass a valid GnuTLS cipher list?");
    return CURLE_SSL_CONNECT_ERROR;
  }

  /* Ensure +SRP comes at the *end* of all relevant strings so that it can be
   * removed if a run-time error indicates that SRP is not supported by this
   * GnuTLS version */
  switch (data->set.ssl.version) {
    case CURL_SSLVERSION_SSLv3:
      prioritylist = GNUTLS_CIPHERS ":-VERS-TLS-ALL:+VERS-SSL3.0";
      sni = false;
      break;
    case CURL_SSLVERSION_DEFAULT:
    case CURL_SSLVERSION_TLSv1:
      prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:" GNUTLS_SRP;
      break;
    case CURL_SSLVERSION_TLSv1_0:
      prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:"
      break;
    case CURL_SSLVERSION_TLSv1_1:
      prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:"
      break;
    case CURL_SSLVERSION_TLSv1_2:
      prioritylist = GNUTLS_CIPHERS ":-VERS-SSL3.0:-VERS-TLS-ALL:"
      break;
    case CURL_SSLVERSION_SSLv2:
    default:
      failf(data, "GnuTLS does not support SSLv2");
      return CURLE_SSL_CONNECT_ERROR;
      break;
  }
  rc = gnutls_priority_set_direct(session, prioritylist, &err);
  if((rc == GNUTLS_E_INVALID_REQUEST) && err) {
    if(!strcmp(err, GNUTLS_SRP)) {
      /* This GnuTLS was probably compiled without support for SRP.
       * Note that fact and try again without it. */
      int validprioritylen = curlx_uztosi(err - prioritylist);
      char *prioritycopy = strdup(prioritylist);
      if(!prioritycopy)
        return CURLE_OUT_OF_MEMORY;

      infof(data, "This GnuTLS does not support SRP\n");
      if(validprioritylen)
        /* Remove the :+SRP */
        prioritycopy[validprioritylen - 1] = 0;
      rc = gnutls_priority_set_direct(session, prioritycopy, &err);
      free(prioritycopy);
    }
  }
  if(rc != GNUTLS_E_SUCCESS) {
    failf(data, "Error %d setting GnuTLS cipher list starting with %s",
          rc, err);
    return CURLE_SSL_CONNECT_ERROR;
  }
Fabian Frank's avatar
Fabian Frank committed
#ifdef HAS_ALPN
  if(data->set.ssl_enable_alpn) {
    int cur = 0;
    gnutls_datum_t protocols[2];

#ifdef USE_NGHTTP2
    if(data->set.httpversion == CURL_HTTP_VERSION_2_0) {
      protocols[cur].data = (unsigned char *)NGHTTP2_PROTO_VERSION_ID;
      protocols[cur].size = NGHTTP2_PROTO_VERSION_ID_LEN;
      cur++;
      infof(data, "ALPN, offering %s\n", NGHTTP2_PROTO_VERSION_ID);
    protocols[cur].data = (unsigned char *)ALPN_HTTP_1_1;
    protocols[cur].size = ALPN_HTTP_1_1_LENGTH;
    cur++;
    infof(data, "ALPN, offering %s\n", ALPN_HTTP_1_1);

    gnutls_alpn_set_protocols(session, protocols, cur, 0);
Fabian Frank's avatar
Fabian Frank committed
#endif
    if(gnutls_certificate_set_x509_key_file(
         conn->ssl[sockindex].cred,
         data->set.str[STRING_CERT],
         data->set.str[STRING_KEY] ?
         data->set.str[STRING_KEY] : data->set.str[STRING_CERT],
         do_file_type(data->set.str[STRING_CERT_TYPE]) ) !=
       GNUTLS_E_SUCCESS) {
      failf(data, "error reading X.509 key or certificate file");
      return CURLE_SSL_CONNECT_ERROR;
    }
  }

#ifdef USE_TLS_SRP
  /* put the credentials to the current session */
  if(data->set.ssl.authtype == CURL_TLSAUTH_SRP) {
    rc = gnutls_credentials_set(session, GNUTLS_CRD_SRP,
                                conn->ssl[sockindex].srp_client_cred);
    if(rc != GNUTLS_E_SUCCESS) {
      failf(data, "gnutls_credentials_set() failed: %s", gnutls_strerror(rc));
      return CURLE_SSL_CONNECT_ERROR;
    }
    rc = gnutls_credentials_set(session, GNUTLS_CRD_CERTIFICATE,
                                conn->ssl[sockindex].cred);
    if(rc != GNUTLS_E_SUCCESS) {
      failf(data, "gnutls_credentials_set() failed: %s", gnutls_strerror(rc));
      return CURLE_SSL_CONNECT_ERROR;
    }
  }

  /* set the connection handle (file descriptor for the socket) */
  gnutls_transport_set_ptr(session,
                           GNUTLS_INT_TO_POINTER_CAST(conn->sock[sockindex]));
  /* register callback functions to send and receive data. */
  gnutls_transport_set_push_function(session, Curl_gtls_push);
  gnutls_transport_set_pull_function(session, Curl_gtls_pull);

  /* lowat must be set to zero when using custom push and pull functions. */
  gnutls_transport_set_lowat(session, 0);

#ifdef HAS_OCSP
  if(data->set.ssl.verifystatus) {
    rc = gnutls_ocsp_status_request_enable_client(session, NULL, 0, NULL);
    if(rc != GNUTLS_E_SUCCESS) {
      failf(data, "gnutls_ocsp_status_request_enable_client() failed: %d", rc);
      return CURLE_SSL_CONNECT_ERROR;
    }
  }
#endif

  /* This might be a reconnect, so we check for a session ID in the cache
     to speed up things */

  if(!Curl_ssl_getsessionid(conn, &ssl_sessionid, &ssl_idsize)) {
    /* we got a session id, use it! */
    gnutls_session_set_data(session, ssl_sessionid, ssl_idsize);

    /* Informational message */
    infof (data, "SSL re-using session ID\n");
  }

static CURLcode pkp_pin_peer_pubkey(gnutls_x509_crt_t cert,
                                    const char *pinnedpubkey)
{
  /* Scratch */
  size_t len1 = 0, len2 = 0;

  gnutls_pubkey_t key = NULL;

  /* Result is returned to caller */
  int ret = 0;
  CURLcode result = CURLE_SSL_PINNEDPUBKEYNOTMATCH;

  /* if a path wasn't specified, don't pin */
  if(NULL == pinnedpubkey)
    return CURLE_OK;

  if(NULL == cert)
    return result;

  do {
    /* Begin Gyrations to get the public key     */
    gnutls_pubkey_init(&key);

    ret = gnutls_pubkey_import_x509(key, cert, 0);
    if(ret < 0)
      break; /* failed */

    ret = gnutls_pubkey_export(key, GNUTLS_X509_FMT_DER, NULL, &len1);
    if(ret != GNUTLS_E_SHORT_MEMORY_BUFFER || len1 == 0)
      break; /* failed */

    buff1 = malloc(len1);
    if(NULL == buff1)
      break; /* failed */

    len2 = len1;

    ret = gnutls_pubkey_export(key, GNUTLS_X509_FMT_DER, buff1, &len2);
    if(ret < 0 || len1 != len2)
      break; /* failed */

    /* End Gyrations */

    /* The one good exit point */
    result = Curl_pin_peer_pubkey(pinnedpubkey, buff1, len1);
  } while(0);

  if(NULL != key)
    gnutls_pubkey_deinit(key);

static Curl_recv gtls_recv;
static Curl_send gtls_send;

static CURLcode
gtls_connect_step3(struct connectdata *conn,
                   int sockindex)
{
  unsigned int cert_list_size;
  const gnutls_datum_t *chainp;
  unsigned int verify_status = 0;
  gnutls_x509_crt_t x509_cert, x509_issuer;
  gnutls_datum_t issuerp;
  char certbuf[256] = ""; /* big enough? */
  size_t size;
  unsigned int algo;
  unsigned int bits;
  time_t certclock;
  const char *ptr;
  struct SessionHandle *data = conn->data;
  gnutls_session_t session = conn->ssl[sockindex].session;
  void *ssl_sessionid;
Fabian Frank's avatar
Fabian Frank committed
#ifdef HAS_ALPN
  gnutls_datum_t proto;
#endif
Daniel Stenberg's avatar
Daniel Stenberg committed
  CURLcode result = CURLE_OK;
  gnutls_protocol_t version = gnutls_protocol_get_version(session);

  /* the name of the cipher suite used, e.g. ECDHE_RSA_AES_256_GCM_SHA384. */
  ptr = gnutls_cipher_suite_get_name(gnutls_kx_get(session),
                                     gnutls_cipher_get(session),
                                     gnutls_mac_get(session));

  infof(data, "SSL connection using %s / %s\n",
        gnutls_protocol_get_name(version), ptr);

  /* This function will return the peer's raw certificate (chain) as sent by
     the peer. These certificates are in raw format (DER encoded for
     X.509). In case of a X.509 then a certificate list may be present. The
     first certificate in the list is the peer's certificate, following the
     issuer's certificate, then the issuer's issuer etc. */

  chainp = gnutls_certificate_get_peers(session, &cert_list_size);
  if(!chainp) {
    if(data->set.ssl.verifypeer ||
       data->set.ssl.verifyhost ||
       data->set.ssl.issuercert) {
#ifdef USE_TLS_SRP
      if(data->set.ssl.authtype == CURL_TLSAUTH_SRP
         && data->set.ssl.username != NULL
         && !data->set.ssl.verifypeer
         && gnutls_cipher_get(session)) {
        /* no peer cert, but auth is ok if we have SRP user and cipher and no
           peer verify */
      }
      else {
#endif
        failf(data, "failed to get server cert");
        return CURLE_PEER_FAILED_VERIFICATION;
#ifdef USE_TLS_SRP
      }
#endif
    }
    infof(data, "\t common name: WARNING couldn't obtain\n");
  }

  if(data->set.ssl.certinfo && chainp) {
    unsigned int i;

    result = Curl_ssl_init_certinfo(data, cert_list_size);
    if(result)
      return result;

    for(i = 0; i < cert_list_size; i++) {
      const char *beg = (const char *) chainp[i].data;
      const char *end = beg + chainp[i].size;

      result = Curl_extract_certinfo(conn, i, beg, end);
      if(result)
        return result;
    }
  }

  if(data->set.ssl.verifypeer) {
    /* This function will try to verify the peer's certificate and return its
       status (trusted, invalid etc.). The value of status should be one or
       more of the gnutls_certificate_status_t enumerated elements bitwise
       or'd. To avoid denial of service attacks some default upper limits
       regarding the certificate key size and chain size are set. To override
       them use gnutls_certificate_set_verify_limits(). */
    rc = gnutls_certificate_verify_peers2(session, &verify_status);
    if(rc < 0) {
      failf(data, "server cert verify failed: %d", rc);
      return CURLE_SSL_CONNECT_ERROR;
    }
    /* verify_status is a bitmask of gnutls_certificate_status bits */
    if(verify_status & GNUTLS_CERT_INVALID) {
      if(data->set.ssl.verifypeer) {
        failf(data, "server certificate verification failed. CAfile: %s "
              "CRLfile: %s", data->set.ssl.CAfile?data->set.ssl.CAfile:"none",
              data->set.ssl.CRLfile?data->set.ssl.CRLfile:"none");
        return CURLE_SSL_CACERT;
      }
      else
        infof(data, "\t server certificate verification FAILED\n");
      infof(data, "\t server certificate verification OK\n");
    infof(data, "\t server certificate verification SKIPPED\n");
#ifdef HAS_OCSP
  if(data->set.ssl.verifystatus) {
    if(gnutls_ocsp_status_request_is_checked(session, 0) == 0) {
      gnutls_datum_t status_request;
      gnutls_ocsp_resp_t ocsp_resp;

      gnutls_ocsp_cert_status_t status;
      gnutls_x509_crl_reason_t reason;

      rc = gnutls_ocsp_status_request_get(session, &status_request);

      infof(data, "\t server certificate status verification FAILED\n");

      if(rc == GNUTLS_E_REQUESTED_DATA_NOT_AVAILABLE) {
        failf(data, "No OCSP response received");
        return CURLE_SSL_INVALIDCERTSTATUS;
      }

      if(rc < 0) {
        failf(data, "Invalid OCSP response received");
        return CURLE_SSL_INVALIDCERTSTATUS;
      }

      gnutls_ocsp_resp_init(&ocsp_resp);

      rc = gnutls_ocsp_resp_import(ocsp_resp, &status_request);
      if(rc < 0) {
        failf(data, "Invalid OCSP response received");
        return CURLE_SSL_INVALIDCERTSTATUS;
      }

      rc = gnutls_ocsp_resp_get_single(ocsp_resp, 0, NULL, NULL, NULL, NULL,
                                       &status, NULL, NULL, NULL, &reason);

      switch(status) {
      case GNUTLS_OCSP_CERT_GOOD:
        break;

      case GNUTLS_OCSP_CERT_REVOKED: {
        const char *crl_reason;

        switch(reason) {
          default:
          case GNUTLS_X509_CRLREASON_UNSPECIFIED:
            crl_reason = "unspecified reason";
            break;

          case GNUTLS_X509_CRLREASON_KEYCOMPROMISE:
            crl_reason = "private key compromised";
            break;

          case GNUTLS_X509_CRLREASON_CACOMPROMISE:
            crl_reason = "CA compromised";
            break;

          case GNUTLS_X509_CRLREASON_AFFILIATIONCHANGED:
            crl_reason = "affiliation has changed";
            break;

          case GNUTLS_X509_CRLREASON_SUPERSEDED:
            crl_reason = "certificate superseded";
            break;

          case GNUTLS_X509_CRLREASON_CESSATIONOFOPERATION:
            crl_reason = "operation has ceased";
            break;

          case GNUTLS_X509_CRLREASON_CERTIFICATEHOLD:
            crl_reason = "certificate is on hold";
            break;

          case GNUTLS_X509_CRLREASON_REMOVEFROMCRL:
            crl_reason = "will be removed from delta CRL";
            break;

          case GNUTLS_X509_CRLREASON_PRIVILEGEWITHDRAWN:
            crl_reason = "privilege withdrawn";
            break;

          case GNUTLS_X509_CRLREASON_AACOMPROMISE:
            crl_reason = "AA compromised";
            break;
        }

        failf(data, "Server certificate was revoked: %s", crl_reason);
        break;
      }

      default:
      case GNUTLS_OCSP_CERT_UNKNOWN:
        failf(data, "Server certificate status is unknown");
        break;
      }

      gnutls_ocsp_resp_deinit(ocsp_resp);
      infof(data, "\t server certificate status verification OK\n");
    infof(data, "\t server certificate status verification SKIPPED\n");