- Nov 05, 2018
-
-
Bernd Edlinger authored
Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7519)
-
Pauli authored
Reviewed-by:
-
Pauli authored
Reviewed-by:
-
- Nov 04, 2018
-
-
Benjamin Kaduk authored
Commit 9ef9088c switched the SSL/SSL_CTX statistics counters to using Thread-Sanitizer-friendly primitives. However, it erroneously converted an addition of -1 (for s->session_ctx->stats.sess_accept) to an addition of +1, since that is the only counter API provided by the internal tsan_assist.h header until the previous commit. This means that for each accepted (initial) connection, the session_ctx's counter would get doubly incremented, and the (switched) ctx's counter would also get incremented. Restore the counter decrement so that each accepted connection increments exactly one counter exactly once (in net effect). Reviewed-by:
-
Benjamin Kaduk authored
The existing tsan_counter() API increments a reference counter. Provide a new API, tsan_decr(), to decrement such a reference counter. This can be used, for example, when a reference is added to the session_ctx's sess_accept stats but should more properly be tracked in the regular ctx's statistics. Reviewed-by:
-
- Nov 02, 2018
-
-
Richard Levitte authored
If engine building fails for some reason, we must make sure to close the /dev/crypto handle. Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/7506) (cherry picked from commit 681e8cacdbdc44ac00af29b6656fc52745a9baa2)
-
Richard Levitte authored
We opened /dev/crypto once for each session, which is quite unnecessary. With this change, we open /dev/crypto once at engine init, and close it on unload. Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Copying an EVP_MD_CTX, including the implementation local bits, is a necessary operation. In this case, though, it's the same as initializing the local bits to be "copied to". Fixes #7495 Reviewed-by:
-
Richard Levitte authored
The documentation says some commands care, but the code says differently. Reviewed-by:
-
- Nov 01, 2018
-
-
Pauli authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7549) (cherry picked from commit 00496b64)
-
- Oct 31, 2018
-
-
Richard Levitte authored
This makes sure that any resulting directory target in the build files also depend on object files meant for shared libraries. As a side effect, we move the production of the dirinfo structure from common.tmpl to Configure, to make it easier to check the result. Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7452) (cherry picked from commit b6e66075)
-
Andy Polyakov authored
This excluses user from additional PATH adjustments in case NDK has llvm-ar. Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7443) (cherry picked from commit ddf2e8c8)
-
Andy Polyakov authored
03ad7c00 failed if one didn't pass explicit -D__ANDROID_API__=N :-( Reviewed-by:
-
- Oct 30, 2018
-
-
Bernd Edlinger authored
Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/7413) (cherry picked from commit 6e46c065)
-
Matt Caswell authored
In TLSv1.2 and below a CertificateRequest is sent after the Certificate from the server. This means that by the time the client_cert_cb is called on receipt of the CertificateRequest a call to SSL_get_peer_certificate() will return the server certificate as expected. In TLSv1.3 a CertificateRequest is sent before a Certificate message so calling SSL_get_peer_certificate() returns NULL. To workaround this we delay calling the client_cert_cb until after we have processed the CertificateVerify message, when we are doing TLSv1.3. Fixes #7384 Reviewed-by:
-
Dr. Matthias St. Pierre authored
The RAND_DRBG_TYPE preprocessor define depends on a NID, so we have to include obj_mac.h to make the header selfcontained. Fixes #7521 Reviewed-by:
-
Chocobo1 authored
CLA: trivial Reviewed-by:
-
- Oct 29, 2018
-
-
Richard Levitte authored
pkey_test_ctrl() was designed for parsing values, not for using in test runs. Relying on its returned value when it returned 1 even for control errors made it particularly useless for mac_test_run(). Here, it gets replaced with a MAC specific control function, that parses values the same way but is designed for use in a _run() rather than a _parse() function. This uncovers a SipHash test with an invalid control that wasn't caught properly. After all, that stanza is supposed to test that invalid control values do generate an error. Now we catch that. Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Fixes #7497 Reviewed-by:
-
Richard Levitte authored
We made the build of foo.obj depend on foo.d, meaning the latter gets built first. Unfortunately, the way the compiler works, we are forced to redirect all output to foo.d, meaning that if the source contains an error, the build fails without showing those errors. We therefore remove the dependency and force the build of foo.d to always happen after build of foo.obj. Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Needed to clear a clash between ERR_load_CRYPTO_strings and ERR_load_crypto_strings Reviewed-by:
-
Richard Levitte authored
Believe it or not, the VMS C compiler is remarking on this Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
- Oct 28, 2018
-
-
Dr. Matthias St. Pierre authored
Reviewed-by:
-
Pauli authored
Preallocate an extra limb for some of the big numbers to avoid a reallocation that can potentially provide a side channel. Reviewed-by:
-
Pauli authored
Avoid a timing attack that leaks information via a side channel that triggers when a BN is resized. Increasing the size of the BNs prior to doing anything with them suppresses the attack. Thanks due to Samuel Weiser for finding and locating this. Reviewed-by:
-
Pauli authored
There is a side channel attack against the division used to calculate one of the modulo inverses in the DSA algorithm. This change takes advantage of the primality of the modulo and Fermat's little theorem to calculate the inverse without leaking information. Thanks to Samuel Weiser for finding and reporting this. Reviewed-by:
-
Dr. Matthias St. Pierre authored
Found by Coverity Scan Reviewed-by:
-
Richard Levitte authored
This also gave enough reason to collect the stuff that's common for all iOS config targets into the template "ios-common". Fixes #7318 Reviewed-by:
-
Dr. Matthias St. Pierre authored
The new Configure summary box (41349b5e6db) now hides the warning about the missing seed source (2805ee1e ) too much. To make it more visible again, add warning markers. Reviewed-by:
-
- Oct 27, 2018
-
-
Bernd Edlinger authored
Fixes #7394 Reviewed-by:
-
Dr. Matthias St. Pierre authored
Commit 5b4cb385c18a (#7382) introduced a bug which had the effect that RAND_add()/RAND_seed() failed for buffer sizes less than 32 bytes. The reason was that now the added random data was used exlusively as entropy source for reseeding. When the random input was too short or contained not enough entropy, the DRBG failed without querying the available entropy sources. This commit makes drbg_add() act smarter: it checks the entropy requirements explicitely. If the random input fails this check, it won't be added as entropy input, but only as additional data. More precisely, the behaviour depends on whether an os entropy source was configured (which is the default on most os): - If an os entropy source is avaible then we declare the buffer content as additional data by setting randomness to zero and trigger a regular reseeding. - If no os entropy source is available, a reseeding will fail inevitably. So drbg_add() uses a trick to mix the buffer contents into the DRBG state without forcing a reseeding: it generates a dummy random byte, using the buffer content as additional data. Related-to: #7449 Reviewed-by:
-
- Oct 26, 2018
-
-
Dr. Matthias St. Pierre authored
In commit 8bf366519661 some renamings andd typo fixes were made while adding back the DRBG-HMAC and DRBG-HASH implementation. Since the commit could not be backported, a lot of unnecessary differences between master and 1.1.1 were introduced. These differences result in tiresome merge conflicts when cherry-picking. To minimize these merge-conflicts, this patch ports all 'non-feature' changes of commit 8bf366519661 (e.g., renamings of private variables, fixes of typographical errors, comment changes) manually back to 1.1.1. The commits a83dc59afa2e (#7399) and 8817215d5c52 (#7456) failed to cherry-pick previously to 1.1.1, with this patch they both cherry-pick without conflicts. Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Since 1fb9fdc3 we may attempt to buffer a record from the next epoch that has already been buffered. Prior to that this never occurred. We simply ignore a failure to buffer a duplicated record. Fixes #6902 Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
Paul Yang <yang.yang@baishancloud.com> Reviewed-by:
-
