- Jul 26, 2017
-
-
Emilia Kasper authored
Fixed in 5b8fa431 [ci skip] Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3924)
-
Pauli authored
In function wait_for_async(), allocated async fds is freed if `SSL_get_all_async_fds` fails, but later `fds` is used. Interestingly, it is not freed when everything succeeds. Rewrite the FD set loop to make it more readable and to not modify the allocated pointer so it can be freed. Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/3992) (cherry picked from commit 0a345252)
-
- Jul 25, 2017
-
-
Andy Polyakov authored
"Optimize" is in quotes because it's rather a "salvage operation" for now. Idea is to identify processor capability flags that drive Knights Landing to suboptimial code paths and mask them. Two flags were identified, XSAVE and ADCX/ADOX. Former affects choice of AES-NI code path specific for Silvermont (Knights Landing is of Silvermont "ancestry"). And 64-bit ADCX/ADOX instructions are effectively mishandled at decode time. In both cases we are looking at ~2x improvement. Hardware used for benchmarking courtesy of Atos, experiments run by Romain Dolbeau <romain.dolbeau@atos.net>. Kudos! This is minimalistic backpoint of 64d92d74 Thanks to David Benjamin for spotting typo in Knights Landing detection! Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4006)
-
- Jul 24, 2017
-
-
Andy Polyakov authored
Reviewed-by: Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/3898) (cherry picked from commit 18437871)
-
Andy Polyakov authored
Reviewed-by: Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/3898) (cherry picked from commit d0f6eb1d)
-
Xiaoyin Liu authored
Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4000) (cherry picked from commit e0de4dd5)
-
lolyonok authored
CLA: trivial Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3934) (cherry picked from commit 386e9169)
-
Richard Levitte authored
There's a case when the environment variable OPENSSL_CONF is useless... when cross compiling for mingw and your wine environment has an environment variable OPENSSL_CONF. The latter will override anything that's given when starting wine and there make the use of that environment variable useless in our tests. Therefore, we should not trust it, and use explicit '-config' options instead. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3994) (cherry picked from commit 83e0d090)
-
Richard Levitte authored
Makefile.shared was designed to figure out static library names, shared library names, library version compatibility, import library names and the like on its own. This was a design for pre-1.1.0 OpenSSL because the main Makefile didn't have all that knowledge. With 1.1.0, the situation isn't the same, a lot more knowledge is included in the main Makefile, and while Makefile.shared did things right most of the time (there are some corner cases, such as the choice of .sl or .so as DSO extension on some HPUX versions), there's still an inherent fragility when one has to keep an eye on Makefile.shared to make sure it produces what the main Makefile produces. This change simplifies Makefile.shared by removing all its "intelligence" and have it depend entirely on the input from the main Makefile instead. That way, all the naming is driven from configuration data. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3983) (cherry picked f...
-
- Jul 23, 2017
-
-
Johannes Bauer authored
Changes the EC_KEY_METHOD_get_* family to not need a EC_KEY_METHOD* as its first parameter, but a const EC_KEY_METHOD*, which is entirely sufficient. Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Paul Dale <paul.dale@oracle.com> GH: #3985 (cherry picked from commit 4e9b720e)
-
- Jul 19, 2017
-
-
Matt Caswell authored
The intention of the removed code was to check if the previous operation carried. However this does not work. The "mask" value always ends up being a constant and is all ones - thus it has no effect. This check is no longer required because of the previous commit. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3832) (cherry picked from commit d5475e31)
-
Matt Caswell authored
In TLS mode of operation the padding value "pad" is obtained along with the maximum possible padding value "maxpad". If pad > maxpad then the data is invalid. However we must continue anyway because this is constant time code. We calculate the payload length like this: inp_len = len - (SHA_DIGEST_LENGTH + pad + 1); However if pad is invalid then inp_len ends up -ve (actually large +ve because it is a size_t). Later we do this: /* verify HMAC */ out += inp_len; len -= inp_len; This ends up with "out" pointing before the buffer which is undefined behaviour. Next we calculate "p" like this: unsigned char *p = out + len - 1 - maxpad - SHA256_DIGEST_LENGTH; Because of the "out + len" term the -ve inp_len value is cancelled out so "p" points to valid memory (although technically the pointer arithmetic is undefined behaviour again). We only ever then dereference "p" and never "out" directly so there is never an invalid read based on the bad pointer - so there is no security issue. This commit fixes the undefined behaviour by ensuring we use maxpad in place of pad, if the supplied pad is invalid. With thanks to Brian Carpenter for reporting this issue. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3832) (cherry picked from commit 335d0a46)
-
- Jul 18, 2017
-
-
Emilia Kasper authored
This is an inherent weakness of the padding mode. We can't make the implementation constant time (see the comments in rsa_pk1.c), so add a warning to the docs. Reviewed-by: Rich Salz <rsalz@openssl.org>
-
- Jul 17, 2017
-
-
Bernd Edlinger authored
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3948) (cherry picked from commit daaaa3cb)
-
- Jul 14, 2017
-
-
Bernd Edlinger authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3936)
-
Roelof duToit authored
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3925)
-
Roelof duToit authored
This resolves the retry issue in general, but also the specific case where a TLS 1.3 server sends a post-handshake NewSessionTicket message prior to appdata. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3925)
-
- Jul 10, 2017
-
-
Bernd Edlinger authored
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3896) (cherry picked from commit e1ca9e1f)
-
- Jul 09, 2017
-
-
Richard Levitte authored
Unsigned overflow. Found by Brian Carpenter Fixes #3889 Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3890) (cherry picked from commit a7ff5796)
-
- Jul 07, 2017
-
-
Richard Levitte authored
TAP::Parser::Aggregator::has_errors may return any number, not just 0 and 1. With Perl on VMS, any number from 2 and on is interpreted as a VMS status, the 3 lower bits are the encoded severity (1 = SUCCESS, for example), so depending on what has_errors returns, a test failure might be interpreted as a success. Therefore, it's better to make sure the exit code is 0 or 1, nothing else (they are special on VMS, and mean SUCCESS or FAILURE, to match Unix conventions). Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3880) (cherry picked from commit 4549ed12)
-
Richard Levitte authored
VMS renames our libraries to fit VMS conventions. This must be accounted for when we want to load them. Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3880) (cherry picked from commit bfa3480f)
-
Richard Levitte authored
Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3880) (cherry picked from commit 984cf15e)
-
- Jul 05, 2017
-
-
Rich Salz authored
Ported GH #3842 to 1.1.0 branch Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3844)
-
Matt Caswell authored
Something environmental changed in travis so that it started preferring the ubuntu clang-3.9 version instead of the llvm.org one. This breaks the sanitiser based builds. This change forces travis to de-prioritise the ubuntu clang packages. [extended tests] Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3854)
-
Richard Levitte authored
- in EVP_read_pw_string_min(), the return value from UI_add_* wasn't properly checked - in UI_process(), |state| was never made NULL, which means an error when closing the session wouldn't be accurately reported. Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/3849) (cherry picked from commit b96dba9e)
-
Richard Levitte authored
When tree_calculate_user_set() fails, a jump to error failed to deallocate a possibly allocated |auth_nodes|. Reviewed-by: Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/3850) (cherry picked from commit 67f060ac)
-
- Jul 03, 2017
-
-
Richard Levitte authored
Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/3824)
-
- Jul 01, 2017
-
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3816) (cherry picked from commit f2da4a49)
-
- Jun 29, 2017
-
-
Richard Levitte authored
For Windows, we care which way it is, the resulting file is just a pile of symbols. For VMS, we really need to care about the numeric ordering, and getting the symbols sorted by symbol version too didn't agree with that. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3804) (cherry picked from commit 0e288c2a)
-
Richard Levitte authored
This allows us to guard Unix specific functions with #ifndef / #ifdef OPENSSL_SYS_UNIX Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3804) (cherry picked from commit 9c06cf04)
-
- Jun 25, 2017
-
-
Richard Levitte authored
This function is undocumented, but similarly named functions (such as 'curl_global_cleanup') are documented as internals that should not be called by scripts. Fixes #3765 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3768) (cherry picked from commit 6544a91c)
-
- Jun 22, 2017
-
-
Matt Caswell authored
In 1.0.2 and before OBJ_create() allowed the sn or ln parameter to be NULL. Commit 52832e47 changed that so that it crashed if they were NULL. This was causing problems with the built-in config oid module. If a long name was provided OBJ_create() is initially called with a NULL ln and therefore causes a crash. Fixes #3733 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3753) (cherry picked from commit f13615c5)
-
David Benjamin authored
Per RFC 7905, the cipher suite names end in "_SHA256". The original implementation targeted the -03 draft, but there was a -04 draft right before the RFC was published to make the names consistent. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3748) (cherry picked from commit 32bbf777)
-
- Jun 21, 2017
-
-
Matt Caswell authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3736)
-
Matt Caswell authored
The value of BIO_CTRL_DGRAM_SET_PEEK_MODE was clashing with the value for BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE. In an SCTP enabled build BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE was used unconditionally with the reasoning that it would be ignored if SCTP wasn't in use. Unfortunately due to this clash, this wasn't the case. The BIO ended up going into peek mode and was continually reading the same data over and over - throwing it away as a replay. Fixes #3723 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3724) (cherry picked from commit 99240875)
-
Matt Caswell authored
ECDHE is not properly defined for SSLv3. Commit fe55c4a2 prevented ECDHE from being selected in that protocol. However, historically, servers do still select ECDHE anyway so that commit causes interoperability problems. Clients that previously worked when talking to an SSLv3 server could now fail. This commit introduces an exception which enables a client to continue in SSLv3 if the server selected ECDHE. (cherry picked from commit 8af91fd9 ) Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3734)
-
- Jun 20, 2017
-
-
Bernd Edlinger authored
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3039) (cherry picked from commit 26dc47f3)
-
Benjamin Kaduk authored
Since the clang_devteam_warnings are appended to the gcc_devteam_warnings when strict-warnings are requested, any items present in both the gcc and clang variables will be duplicated in the cflags used for clang builds. Remove the extra copy from the clang-specific flags in favor of the gcc_devteam_warnings that are used for all strict-warnings builds. Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3239) (cherry picked from commit 96db2691) [extended tests]
-
Benjamin Kaduk authored
gcc's -Wextra pulls in -Wold-style-declaration, which triggers when a declaration has a storage-class specifier as a non-initial qualifier. The ISO C formal grammar requires the storage-class to be the first component of the declaration, if present. Seeint as the register storage-class specifier does not really have any effect anymore with modern compilers, remove it entirely while we're here, instead of fixing up the order. Interestingly, the gcc devteam warnings do not pull in -Wextra, though the clang ones do. [extended tests] Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3239) (cherry picked from commit f44903a4)
-
Benjamin Kaduk authored
clang already has it; let's flip the switch and deal with the fallout. Exclude -Wunused-parameter, as we have many places where we keep unused parameters to conform to a uniform vtable-like interface. Also exclude -Wmissing-field-initializers; it's okay to rely on the standard-mandated behavior of filling out with 0/NULL. Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3239) (cherry picked from commit 560ad13c)
-