- Dec 08, 2018
-
-
Andy Polyakov authored
Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7850) (cherry picked from commit 91d0fd1c)
-
Andy Polyakov authored
Copy of RSA_padding_check_PKCS1_type_2 with a twist that rejects padding if nul delimiter is preceded by 8 consecutive 0x03 bytes. Reviewed-by:
Matt Caswell <matt@openssl.org> (cherry picked from commit 60322140) Resolved conflicts: crypto/rsa/rsa_ssl.c (Merged from https://github.com/openssl/openssl/pull/7735)
-
Andy Polyakov authored
And make RSAErr call unconditional. Reviewed-by:
-
Andy Polyakov authored
And make RSAErr call unconditional. Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
Expected usage pattern is to unconditionally set error and then wipe it if there was no actual error. Reviewed-by:
-
- Dec 07, 2018
-
-
Richard Levitte authored
It turns out that the strictness that was implemented in EVP_PKEY_asn1_new() (see Github openssl/openssl#6880) was badly placed for some usages, and that it's better to do this check only when the method is getting registered. Fixes #7758 Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7847) (cherry picked from commit a8600316)
-
- Nov 24, 2018
-
-
Richard Levitte authored
Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/7696) (cherry picked from commit 3be38943)
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
When creating a tarball, it's pointless to include scripts that assume a git workspace. Reviewed-by:
-
Richard Levitte authored
Also adds missing copyright boilerplate to util/mktar.sh Reviewed-by:
-
- Nov 23, 2018
-
-
Andy Polyakov authored
Blinding is performed more efficiently and securely if MONT_CTX for public modulus is available by the time blinding parameter are instantiated. So make sure it's the case. Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Since recently, OpenSSL tarballs are produced with 'make tar' rather than 'make dist', as the latter has turned out to be more troublesome than useful. The next step to look at is why we would need to configure at all to produce a Makefile just to produce a tarball. After all, the tarball should now only contain source files that are present even without configuring. Furthermore, the current method for producing tarballs is a bit complex, and can be greatly simplified with the right tools. Since we have everything versioned with git, we might as well use the tool that comes with it. Added: util/mktar.sh, a simple script to produce OpenSSL tarballs. It takes the options --name to modify the prefix of the distribution, and --tarfile tp modify the tarball file name specifically. This also adds a few entries in .gitattributes to specify files that should never end up in a distribution tarball. Reviewed-by:
-
- Nov 20, 2018
-
-
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/7666)
-
- Nov 13, 2018
-
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
We therefore must add defaults. Reviewed-by:
Viktor Dukhovni <viktor@openssl.org> (Merged from https://github.com/openssl/openssl/pull/7631)
-
Richard Levitte authored
When libssl and libcrypto are compiled on Linux with "-rpath", but not "--enable-new-dtags", the RPATH takes precedence over LD_LIBRARY_PATH, and we end up running with the wrong libraries. This is resolved by using full (or at least relative, rather than just the filename to be found on LD_LIBRARY_PATH) paths to the shared objects. Reviewed-by:
-
Richard Levitte authored
Fixes #7634 Reviewed-by:
-
Richard Levitte authored
We made the build of foo.obj depend on foo.d, meaning the latter gets built first. Unfortunately, the way the compiler works, we are forced to redirect all output to foo.d, meaning that if the source contains an error, the build fails without showing those errors. We therefore remove the dependency and force the build of foo.d to always happen after build of foo.obj. Reviewed-by:
-
- Nov 10, 2018
-
-
Billy Brumley authored
Reviewed-by:
-
- Nov 09, 2018
-
-
Richard Levitte authored
A couple of $(ECHO) sneaked in from patches in newer branches Fixes #7600 Reviewed-by:
-
Richard Levitte authored
... otherwise, it's taken to be part of a device name. Reviewed-by:
-
Richard Levitte authored
We only had the main 'install' target depend on 'all'. This changes the dependencies so targets like install_dev, install_runtime_libs, install_engines and install_programs depend on build targets that are correspond to them more specifically. This increases the parallel possibilities. Fixes #7466 Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/7583) (cherry picked from commit e8d01a60)
-
Richard Levitte authored
When trying 'make -j{n} install', you may occasionally run into trouble because to sub-targets (install_dev and install_runtime) try to install the same shared libraries. That makes parallel install difficult. This is solved by dividing install_runtime into two parts, one for libraries and one for programs, and have install_dev depend on install_runtime_libs instead of installing the shared runtime libraries itself. Fixes #7466 Reviewed-by:
-
- Nov 01, 2018
-
-
Pauli authored
Reviewed-by:
-
- Oct 30, 2018
-
-
Rod Vagg authored
Commit 56fb454d backported the DSA reallocation fix to 1.1.0, however a code block that has multiple statements in 1.1.1+ only has a `goto` in 1.1.0 so introduces a brace that causes a compile failure. CLA:trivial Reviewed-by:
-
- Oct 28, 2018
-
-
Pauli authored
Preallocate an extra limb for some of the big numbers to avoid a reallocation that can potentially provide a side channel. Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/7486) (cherry picked from commit 99540ec7)
-
Pauli authored
Avoid a timing attack that leaks information via a side channel that triggers when a BN is resized. Increasing the size of the BNs prior to doing anything with them suppresses the attack. Thanks due to Samuel Weiser for finding and locating this. Reviewed-by:
-
Pauli authored
There is a side channel attack against the division used to calculate one of the modulo inverses in the DSA algorithm. This change takes advantage of the primality of the modulo and Fermat's little theorem to calculate the inverse without leaking information. Thanks to Samuel Weiser for finding and reporting this. Reviewed-by:
-
- Oct 22, 2018
-
-
Dr. Matthias St. Pierre authored
Previously, the RNG sets `initialized=1` after the first call to RAND_poll(), although its criterion for being initialized actually is whether condition `entropy >= ENTROPY_NEEDED` is true. This commit now assigns `initialized=(entropy >= ENTROPY_NEEDED)`, which has the effect that on the next call, RAND_poll() will be called again, if it previously failed to obtain enough entropy. Reviewed-by:
-
- Oct 19, 2018
-
-
Andy Polyakov authored
{make|swap|get|set}context are removed in POSIX.1-2008, but glibc apparently keeps providing it. Reviewed-by:
-
- Oct 18, 2018
-
-
Viktor Dukhovni authored
Also, some readers of the code find starting the count at 1 for EE cert confusing (since RFC5280 counts only non-self-issued intermediate CAs, but we also counted the leaf). Therefore, never count the EE cert, and adjust the path length comparison accordinly. This may be more clear to the reader. Reviewed-by:
-
Viktor Dukhovni authored
At the bottom of https://tools.ietf.org/html/rfc5280#page-12 and top of https://tools.ietf.org/html/rfc5280#page-13 (last paragraph of above https://tools.ietf.org/html/rfc5280#section-3.3), we see: This specification covers two classes of certificates: CA certificates and end entity certificates. CA certificates may be further divided into three classes: cross-certificates, self-issued certificates, and self-signed certificates. Cross-certificates are CA certificates in which the issuer and subject are different entities. Cross-certificates describe a trust relationship between the two CAs. Self-issued certificates are CA certificates in which the issuer and subject are the same entity. Self-issued certificates are generated to support changes in policy or operations. Self- signed certificates are self-issued certificates where the digital signature may be verified by the public key bound into the certificate. Self-signed certificates are used to convey a public key for use to begin certification paths. End entity certificates are issued to subjects that are not authorized to issue certificates. that the term "self-issued" is only applicable to CAs, not end-entity certificates. In https://tools.ietf.org/html/rfc5280#section-4.2.1.9 the description of path length constraints says: The pathLenConstraint field is meaningful only if the cA boolean is asserted and the key usage extension, if present, asserts the keyCertSign bit (Section 4.2.1.3). In this case, it gives the maximum number of non-self-issued intermediate certificates that may follow this certificate in a valid certification path. (Note: The last certificate in the certification path is not an intermediate certificate, and is not included in this limit. Usually, the last certificate is an end entity certificate, but it can be a CA certificate.) This makes it clear that exclusion of self-issued certificates from the path length count applies only to some *intermediate* CA certificates. A leaf certificate whether it has identical issuer and subject or whether it is a CA or not is never part of the intermediate certificate count. The handling of all leaf certificates must be the same, in the case of our code to post-increment the path count by 1, so that we ultimately reach a non-self-issued intermediate it will be the first one (not zeroth) in the chain of intermediates. Reviewed-by:
-
- Oct 17, 2018
-
-
Andy Polyakov authored
(back-port of commit 7d0effea ) Reviewed-by:
-
- Oct 15, 2018
-
-
Benjamin Kaduk authored
Historically (i.e., OpenSSL 1.0.x), the openssl applications would allow for empty subject attributes to be passed via the -subj argument, e.g., `opensl req -subj '/CN=joe/O=/OU=local' ...`. Commit db4c08f0 applied a badly needed rewrite to the parse_name() helper function that parses these strings, but in the process dropped a check that would skip attributes with no associated value. As a result, such strings are now treated as hard errors and the operation fails. Restore the check to skip empty attribute values and restore the historical behavior. Document the behavior for empty subject attribute values in the corresponding applications' manual pages. (cherry picked from commit 3d362f19) (cherry picked from commit a7ee1ef6 ) Reviewed-by:
-
