- 07 Mar, 2019 4 commits
-
-
Bernd Edlinger authored
Fixes #8364 and #8357 Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/8365)
-
Bernd Edlinger authored
Fixes #8416 Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/8428)
-
Matt Caswell authored
The previous commit fixed an underflow that may occur in ecp_nistp521.c. This commit adds a test for that condition. It is heavily based on an original test harness by Billy Brumley. Reviewed-by:
Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/8405)
-
Matt Caswell authored
The function felem_diff_128_64 in ecp_nistp521.c substracts the number |in| from |out| mod p. In order to avoid underflow it first adds 32p mod p (which is equivalent to 0 mod p) to |out|. The comments and variable naming suggest that the original author intended to add 64p mod p. In fact it has been shown that with certain unusual co-ordinates it is possible to cause an underflow in this function when only adding 32p mod p while performing a point double operation. By changing this to 64p mod p the underflow is avoided. It turns out to be quite difficult to construct points that satisfy the underflow criteria although this has been done and the underflow demonstrated. However none of these points are actually on the curve. Finding points that satisfy the underflow criteria and are also *on* the curve is considered significantly more difficult. For this reason we do not believe that this issue is currently practically exploitable and therefore no CVE has been assigned. This only impacts builds using the enable-ec_nistp_64_gcc_128 Configure option. With thanks to Bo-Yin Yang, Billy Brumley and Dr Liu for their significant help in investigating this issue. Reviewed-by:
Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/8405)
-
- 06 Mar, 2019 24 commits
-
-
Shane Lontis authored
Reviewed-by:
Matt Caswell <matt@openssl.org> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8393)
-
David von Oheimb authored
constify *_dup() and *i2d_*() and related functions as far as possible, introducing DECLARE_ASN1_DUP_FUNCTION Reviewed-by:
Richard Levitte <levitte@openssl.org> Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8029)
-
Matt Caswell authored
Correctly describe the maximum IV length. Reviewed-by:
Paul Dale <paul.dale@oracle.com> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8406)
-
Matt Caswell authored
Reviewed-by:
Paul Dale <paul.dale@oracle.com> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8406)
-
Matt Caswell authored
ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for every encryption operation. RFC 7539 specifies that the nonce value (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and front pads the nonce with 0 bytes if it is less than 12 bytes. However it also incorrectly allows a nonce to be set of up to 16 bytes. In this case only the last 12 bytes are significant and any additional leading bytes are ignored. It is a requirement of using this cipher that nonce values are unique. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks. If an application changes the default nonce length to be longer than 12 bytes and then makes a change to the leading bytes of the nonce expecting the new value to be a new unique nonce then such an application could inadvertently encrypt messages with a reused nonce. Additionally the ignored bytes in a long nonce are not covered by the integrity guarantee of this cipher. Any application that relies on the integrity of these ignored leading bytes of a long nonce may be further affected. Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe because no such use sets such a long nonce value. However user applications that use this cipher directly and set a non-default nonce length to be longer than 12 bytes may be vulnerable. CVE-2019-1543 Fixes #8345 Reviewed-by:
Paul Dale <paul.dale@oracle.com> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8406)
-
Richard Levitte authored
The trace API doesn't know that the BIOs we give it, let alone those we attach to callbacks as 'void *data', need to be cleaned up. This must be done in the application. To ensure this cleanup is done as late as possible, use atexit(). Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
This disabled the tracing functionality by making functions do nothing, and making convenience macros produce dead code. Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
Use the environment variables OPENSSL_TRACE to determine what's going to be enabled. The value of this variables is a comma separated list of trace and debugging names, which correspond to the trace category macros defined in include/openssl/trace.h. For example, setting OPENSSL_DEBUG=TRACE,SSL will enable debugging output for the types OSSL_TRACE_CATEGORY_TRACE and OSSL_TRACE_CATEGORY_SSL. This also slightly changes the handling of the prefix method in apps/apps.c. This is for the better, as the prefix method pointer was unneccessarily stored in two places. Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Richard Levitte authored
The idea is that the application shall be able to register output channels or callbacks to print tracing output as it sees fit. OpenSSL internals, on the other hand, want to print thoses texts using normal printing routines, such as BIO_printf() or BIO_dump() through well defined BIOs. When the application registers callbacks, the tracing functionality sets up an internal BIO that simply forwards received text to the appropriate application provided callback. Co-authored-by:
Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8198)
-
Pauli authored
This should never reduce the range covered and might increase it on some platforms. Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8415)
-
- 05 Mar, 2019 9 commits
-
-
Richard Levitte authored
The GENERATE lines for generating the padlock assembler source were wrongly placed in such a way that they only applied to the shared library build. [extended tests] Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/8412)
-
Matt Caswell authored
Sessions must be immutable once they can be shared with multiple threads. We were breaking that rule by writing the ticket index into it during the handshake. This can lead to incorrect behaviour, including failed connections in multi-threaded environments. Reported by David Benjamin. Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8383)
-
Richard Levitte authored
Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8370)
-
Richard Levitte authored
Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8370)
-
Richard Levitte authored
Disabled by default Fixes #8360 Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8370)
-
Richard Levitte authored
Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8382)
-
Richard Levitte authored
From a Unix point of view, some other platform families have certain quirks. Windows command prompt doesn't expand globs into actual file names, so we must do this. VMS has some oddity with argv pointer size that can cause crashes if you're not careful (by copying it to a less surprising pointer size array). The fixups already exist and are used in the apps/ code. However, the testutil code started using the opt routines from apps/ without including the non-Unix fixups. This change fixes that. For VMS' sake, libtestutil gets an app_malloc() shim, to avoid sucking in all of apps/apps.c. Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8381)
-
Richard Levitte authored
copy_argv was never initialization code. Make it self-cleaning too. Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8381)
-
Richard Levitte authored
The "hw" and "hw-.*" style options are historical artifacts, sprung from the time when ENGINE was first designed, with hardware crypto accelerators and HSMs in mind. Today, these options have largely lost their value, replaced by options such as "no-{foo}eng" and "no-engine". This completes the transition by making "hw" and "hw-.*" deprecated, but automatically translated into more modern variants of the same. In the process, we get rid of the last regular expression in Configure's @disablables, a feature that was ill supported anyway. Also, padlock now gets treated just as every other engine. Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/8380)
-
- 04 Mar, 2019 2 commits
-
-
Vitezslav Cizek authored
GNU strerror_r may return either a pointer to a string that the function stores in buf, or a pointer to some (immutable) static string in which case buf is unused. In such a case we need to set buf manually. Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8371)
-
Pauli authored
Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8392)
-
- 01 Mar, 2019 1 commit
-
-
Bernd Edlinger authored
Use select to wait for /dev/random in readable state, but do not actually read anything from /dev/random, use /dev/urandom first. Use linux define __NR_getrandom instead of the glibc define SYS_getrandom, in case the kernel headers are more current than the glibc headers. Fixes #8215 Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/8251)
-