Pointed out by Victor Vasiliev (vasilvv@mit.edu) via Adam Langley
(Google).

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 1e4a355d)

flags needed to keep it happy.

Reviewed-by: Richard Levitte <levitte@openssl.org>

At least in the case of SSLv3 we can't send an extention.

Reviewed-by: Matt Caswell <matt@openssl.org>
MR #811

(cherry picked from commit 3c06513f)

Remove a comment that suggested further clean up was required.
DH_free() performs the necessary cleanup.

With thanks to the Open Crypto Audit Project for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f3d88952)

Ensure OPENSSL_cleanse() is called on the premaster secret value calculated for GOST.

With thanks to the Open Crypto Audit Project for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit b7ee4815)

Conflicts:
	ssl/s3_srvr.c

Ensure the Kerberos pre-master secret has OPENSSL_cleanse called on it.

With thanks to the Open Crypto Audit Project for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>

A BIGNUM can have the value of -0. The function BN_bn2hex fails to account
for this and can allocate a buffer one byte too short in the event of -0
being used, leading to a one byte buffer overrun. All usage within the
OpenSSL library is considered safe. Any security risk is considered
negligible.

With thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and
Filip Palian for discovering and reporting this issue.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit c5635307)

Conflicts:
	crypto/bn/bn_print.c

The session object on the client side is initially created during
construction of the ClientHello. If the client is DTLS1.2 capable then it
will store 1.2 as the version for the session. However if the server is only
DTLS1.0 capable then when the ServerHello comes back the client switches to
using DTLS1.0 from then on. However the session version does not get
updated. Therefore when the client attempts to resume that session the
server throws an alert because of an incorrect protocol version.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 7322abf5)

Conflicts:
	ssl/s3_clnt.c

Reviewed-by: Matt Caswell <matt@openssl.org>

PR#3872

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Some tool chains (e.g. android) do not define IP_PMTUDISC_PROBE, and so
this build breaks.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 133dce44)

objects.pl only looked for a space to see if the name could be
used as a C identifier.  Improve the test to match the real C
rules.

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 591b7aef)

This is for consistency.
Additionally, have its presence define OPENSSL_SYS_WINDOWS as well.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 3f131556)

Conflicts:
	e_os2.h

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 8846adbd)

The code in bss_dgram.c checks if IP_MTUDISCOVER is defined, where it
should test for IP_MTU_DISCOVER

RT#3888

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 0baaff1a)

If a NewSessionTicket is received by a multi-threaded client when
attempting to reuse a previous ticket then a race condition can occur
potentially leading to a double free of the ticket data.

CVE-2015-1791

This also fixes RT#3808 where a session ID is changed for a session already
in the client session cache. Since the session ID is the key to the cache
this breaks the cache access.

Parts of this patch were inspired by this Akamai change:
https://github.com/akamai/openssl/commit/c0bf69a791239ceec64509f9f19fcafb2461b0d3



Reviewed-by: Rich Salz <rsalz@openssl.org>

dtls1_get_message has an |mt| variable which is the type of the message that
is being requested. If it is negative then any message type is allowed.
However the value of |mt| is not checked in one of the main code paths, so a
peer can send a message of a completely different type and it will be
processed as if it was the message type that we were expecting. This has
very little practical consequences because the current behaviour will still
fail when the format of the message isn't as expected.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 8c2b1d87)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2849707f)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f097f81c)

Also add more ciphersuite test coverage, and a negative test for
512-bit DHE.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 1ee85aab)

The size of the SRP extension can never be negative (the variable
|size| is unsigned). Therefore don't check if it is less than zero.

RT#3862

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 9c89d290)

The return value of i2d functions can be negative if an error occurs.
Therefore don't assign the return value to an unsigned type and *then*
check if it is negative.

RT#3862

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 90e7cdff)

The members of struct timeval on OpenVMS are unsigned. The logic for
calculating timeouts needs adjusting to deal with this.

RT#3862

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit fc52ac90)

Reviewed-by: Matt Caswell <matt@openssl.org>

RT#3860

Reviewed-by: Matt Caswell <matt@openssl.org>

RT#3858

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 71f6130b)

RT#3859

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 60c268b2)

If the record received is for a version that we don't support, previously we
were sending an alert back. However if the incoming record already looks
like an alert then probably we shouldn't do that. So suppress an outgoing
alert if it looks like we've got one incoming.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

bn_get_bits5 was overstepping array boundary by 1 byte. It was exclusively
read overstep and data could not have been used. The only potential problem
would be if array happens to end on the very edge of last accesible page.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 69567687)

RT#3852

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 86e5d1e3)

BLKINIT optimization worked on T4, but for some reason appears "too
aggressive" for T3 triggering intermiitent EC failures. It's not clear
why only EC is affected...

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 579734ce)

The update: target in engines/ didn't recurse into engines/ccgost.
The update: and depend: targets in engines/ccgost needed a fixup.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 8b822d25)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 6f45032f)

Conflicts:
	apps/Makefile

We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in.  This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.

This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0f539dc1)

Conflicts:
	Makefile.org
	apps/Makefile
	test/Makefile

The certificate masks are used to select which ciphersuite we are going to
use. The variables |emask_k| and |emask_a| relate to export grade key
exchange and authentication respecitively. The variables |mask_k| and
|mask_a| are the equivalent versions for non-export grade. This fixes an
instance where the two usages of export/non-export were mixed up. In
practice it makes little difference since it still works!

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit fdfe8b06)

Remove support for the two export grade static DH ciphersuites. These two
ciphersuites were newly added (along with a number of other static DH
ciphersuites) to 1.0.2. However the two export ones have *never* worked
since they were introduced. It seems strange in any case to be adding new
export ciphersuites, and given "logjam" it also does not seem correct to
fix them.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 13f8eb47)

Conflicts:
	CHANGES

If BN_rand is called with |bits| set to 1 and |top| set to 1 then a 1 byte
buffer overflow can occur. There are no such instances within the OpenSSL at
the moment.

Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke, Filip Palian for
discovering and reporting this issue.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.

Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 7cc18d81)

Conflicts:
	crypto/bn/bn.h
	crypto/bn/bn_err.c

If a client receives a bad hello request in DTLS then the alert is not
sent correctly.

RT#2801

Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 4dc1aa04)

40 bit ciphers are limited to 512 bit RSA, 56 bit ciphers to 1024 bit.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit ac38115c)