Reviewed-by: Matt Caswell <matt@openssl.org>

I think the second "VC-WIN32" should be "VC-WIN64".
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial

The number is taken from the OPENSSL_VERSION_NUMBER which is already
in the hex form.

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1706)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1707)

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Looking for something starting with '-Wl,-rpath,' isn't good enough,
as someone might give something like '-Wl,--enable-new-dtags,-rpath,/PATH'.
Looking for ',-rpath,' should be safe enough.

We could remove the preloading stuff entirely, but just in case the
user has chosen to given RPATH setting arguments at configuration,
we'd better make sure testing will still work.  Fair warning, there
are some configuration options that do not work with preloaded OpenSSL
libraries, such as the sanity checking ones.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Make Configure recognise -rpath and -R to support user added rpaths
for OSF1 and Solaris.  For convenience, add a variable LIBRPATH in the
Unix Makefile, which the users can use as follows:

    ./config [options] -Wl,-rpath,\$(LIBRPATH)

Reviewed-by: Rich Salz <rsalz@openssl.org>

Before OpenSSL 1.1.0, binaries were installed in a non-standard
location by default, and runpath directories were therefore added in
those binaries, to make sure the executables would be able to find the
shared libraries they were linked with.

With OpenSSL 1.1.0 and on, binaries are installed in standard
directories by default, and the addition of runpath directories is
therefore not needed any more.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1702)

Reviewed-by: Rich Salz <rsalz@openssl.org>

Note that it relies on a trick from Configure, where file names for
object files made from C++ source get '.cc' replaced with '_cc.o' to
recognise them.  This is needed so the correct compiler is used when
linking binaries.

Reviewed-by: Rich Salz <rsalz@openssl.org>

A note: this will form object file names by changing '.cc' to
'_cc.o'.  This will permit other configuration code to recognise these
object files were built for C++ rather than C.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The original X509_NAME decode free code was buggy: this
could result in double free or leaks if a malloc failure
occurred.

Simplify and fix the logic.

Thanks to Guido Vranken for reporting this issue.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1691)

Reviewed-by: Richard Levitte <levitte@openssl.org>

- make 'pip install --user cpp-coveralls' conditional;
- limit no-stdio to single build per operating environment;
- omit enable-asan duplicate;

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Align at 5 characters, not 4. There are 5-digit numbers in the output.
Also avoid emitting an extra blank line and trailing whitespace.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

The prevailing style seems to not have trailing whitespace, but a few
lines do. This is mostly in the perlasm files, but a few C files got
them after the reformat. This is the result of:

  find . -name '*.pl' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
  find . -name '*.c' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'
  find . -name '*.h' | xargs sed -E -i '' -e 's/( |'$'\t'')*$//'

Then bn_prime.h was excluded since this is a generated file.

Note mkerr.pl has some changes in a heredoc for some help output, but
other lines there lack trailing whitespace too.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

New minimal fuzz corpora for asn1, asn1parse, bndiv, crl and x509

Reviewed-by: Andy Polyakov <appro@openssl.org>

GH: #1678

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

We now set the handshake header, and close the packet directly in the
write_state_machine. This is now possible because it is common for all
messages.

Reviewed-by: Rich Salz <rsalz@openssl.org>

tls_construct_finished() used to have different arguments to all of the
other construction functions. It doesn't anymore, so there is no neeed to
treat it as a special case.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Ensure all message types work the same way including CCS so that the state
machine doesn't need to know about special cases. Put all the special logic
into ssl_set_handshake_header() and ssl_close_construct_packet().

Reviewed-by: Rich Salz <rsalz@openssl.org>

Move setting the handshake header up a level into the state machine code
in order to reduce boilerplate.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Instead of initialising, finishing and cleaning up the WPACKET in every
message construction function, we should do it once in
write_state_machine().

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

ssl_set_handshake_header2() was only ever a temporary name while we had
to have ssl_set_handshake_header() for code that hadn't been converted to
WPACKET yet. No code remains that needed that so we can rename it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove the old ssl_set_handshake_header() implementations. Later we will
rename ssl_set_handshake_header2() to ssl_set_handshake_header().

Reviewed-by: Rich Salz <rsalz@openssl.org>

This is no longer needed now that all messages use WPACKET

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Tidy up srp_Calc_k and SRP_Calc_u by making them a special case of
srp_Calc_xy which performs SHA1(PAD(x) | PAD(y)).

This addresses an OCAP Audit issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

A convenience macro was using the wrong underlying function.

Reviewed-by: Rich Salz <rsalz@openssl.org>