- 17 May, 2017 2 commits
-
-
Richard Levitte authored
Notifications can be (and should be) configured on account basis on the CI web site. This avoids getting emails to openssl-commits for personal accounts that also build OpenSSL stuff. Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3484)
-
Matt Caswell authored
An alert message is 2 bytes long. In theory it is permissible in SSLv3 - TLSv1.2 to fragment such alerts across multiple records (some of which could be empty). In practice it make no sense to send an empty alert record, or to fragment one. TLSv1.3 prohibts this altogether and other libraries (BoringSSL, NSS) do not support this at all. Supporting it adds significant complexity to the record layer, and its removal is unlikely to cause inter-operability issues. The DTLS code for this never worked anyway and it is not supported at a protocol level for DTLS. Similarly fragmented DTLS handshake records only work at a protocol level where at least the handshake message header exists within the record. DTLS code existed for trying to handle fragmented handshake records smaller than this size. This code didn't work either so has also been removed. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3476)
-
- 16 May, 2017 1 commit
-
-
Rich Salz authored
Allow multiple file arguments. Split bntests.txt into separate files. Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3471)
-
- 15 May, 2017 7 commits
-
-
Tomas Mraz authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3442)
-
Tomas Mraz authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3442)
-
Tomas Mraz authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3442)
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3469)
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3468)
-
Pauli authored
[extended tests] Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3393)
-
Pauli authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3393)
-
- 12 May, 2017 5 commits
-
-
Rich Salz authored
Suppose OPENSSL_USE_NODELETE (via Nick Reilly) Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3399)
-
Rich Salz authored
Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3399)
-
Rich Salz authored
Reviewed-by:
Stephen Henson <steve@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3454)
-
Todd Short authored
Reviewed-by:
Matt Caswell <matt@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3439)
-
Rich Salz authored
Reviewed-by:
Stephen Henson <steve@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3452)
-
- 11 May, 2017 25 commits
-
-
David Benjamin authored
The assembler already knows the actual path to the generated file and, in other perlasm architectures, is left to manage debug symbols itself. Notably, in OpenSSL 1.1.x's new build system, which allows a separate build directory, converting .pl to .s as the scripts currently do result in the wrong paths. This also avoids inconsistencies from some of the files using $0 and some passing in the filename. Reviewed-by:
Richard Levitte <levitte@openssl.org> Reviewed-by:
Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3431)
-
Rich Salz authored
Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3443)
-
Rich Salz authored
Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3443)
-
Todd Short authored
Issue 1: sh.bittable_size is a size_t but i is and int, which can result in freelist == -1 if sh.bittable_size exceeds an int. This seems to result in an OPENSSL_assert due to invalid allocation size, so maybe that is "ok." Worse, if sh.bittable_size is exactly 1<<31, then this becomes an infinite loop (because 1<<31 is a negative int, so it can be shifted right forever and sticks at -1). Issue 2: CRYPTO_secure_malloc_init() sets secure_mem_initialized=1 even when sh_init() returns 0. If sh_init() fails, we end up with secure_mem_initialized=1 but sh.minsize=0. If you then call secure_malloc(), which then calls, sh_malloc(), this then enters an infite loop since 0 << anything will never be larger than size. Issue 3: That same sh_malloc loop will loop forever for a size greater than size_t/2 because i will proceed (assuming sh.minsize=16): i=16, 32, 64, ..., size_t/8, size_t/4, size_t/2, 0, 0, 0, 0, .... This sequence will never be larger than "size". Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3449)
-
Richard Levitte authored
BIO_socket_ioctl is only implemented on VMS for VMS version 7.0 and up, but since we only support version 7.1 and up, there's no need to check the VMS version. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3448)
-
Richard Levitte authored
Not exactly everywhere, but in those source files where stdint.h is included conditionally, or where it will be eventually Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3447)
-
Richard Levitte authored
In some cases, testutil outputs subtests like this: 1..6 # Subtest: progname The standard set by Test::More (because there really is no actual standard yet) gives this display: # Subtest: progname 1..6 Until the standard is actually agreed upon, let's do it like Test::More. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3446)
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3445)
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3445)
-
Bernd Edlinger authored
- Mostly missing fall thru comments - And uninitialized value used in sslapitest.c Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3440)
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3441)
-
Rich Salz authored
Add file/line# to test error message. Also remove expected/got fields since TEST structure prints them. Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3324)
-
Rich Salz authored
Report test detail error. Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3324)
-
Rich Salz authored
Also, allow multiple files on commandline (for future splitup of evptests.txt) Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3324)
-
Tomas Mraz authored
Allow conversion of existing requests to certificates again. Fixes the issue #3396 Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3437)
-
Pauli authored
The second BN_is_zero test can never be true. Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3434)
-
Matt Caswell authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3436)
-
Matt Caswell authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3436)
-
Matt Caswell authored
Only applies if we're not doing psk. Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3436)
-
Matt Caswell authored
We abort if we read a message like this. Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3436)
-
Matt Caswell authored
We should be validating that. Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3436)
-
Matt Caswell authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3436)
-
Matt Caswell authored
Previously we sent a decode_error alert. Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3436)
-
Matt Caswell authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3436)
-
Matt Caswell authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3436)
-