- 26 May, 2017 3 commits
-
-
Matt Caswell authored
Issue #3562 describes a problem where a race condition can occur in the Proxy such that a test "ok" line can appear in the middle of other text causing the test harness to miss it. The issue is that we do not wait for the client process to finish after the test is complete, so that process may continue to write data to stdout/stderr at the same time that the test harness does. This commit fixes TLSProxy so that we always wait for the client process to finish before continuing. Fixes #3562 Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3567) (cherry picked from commit b72668a0)
-
Todd Short authored
The check for SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION is inconsistent. Most places check SSL->options, one place is checking SSL_CTX->options; fix that. Reviewed-by:
Matt Caswell <matt@openssl.org> Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> GH: #3523 (cherry picked from commit dffdcc77)
-
Rainer Jung authored
CLA: Trivial Fixes #3563. Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
-
- 25 May, 2017 5 commits
-
-
Kurt Roeckx authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> GH: #3557 (cherry picked from commit 6061f80b)
-
Matt Caswell authored
Fixes #3541 Reviewed-by:
-
Matt Caswell authored
Reviewed-by:Stephen Henson <steve@openssl.org>
-
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Reviewed-by:
Kurt Roeckx <kurt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3547)
-
- 24 May, 2017 2 commits
-
-
David Woodhouse authored
Part of issue #3531 Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
- 23 May, 2017 1 commit
-
-
Paul Yang authored
In the example section. CLA: trivial Signed-off-by:
Paul Yang <paulyang.inf@gmail.com> Reviewed-by:
-
- 22 May, 2017 4 commits
-
-
Alex Gaynor authored
Reviewed-by:
-
Todd Short authored
Remove assertion when mmap() fails. Only give the 1<<31 limit test as an example. Fix the small arena test to just check for the symptom of the infinite loop (i.e. initialized set on failure), rather than the actual infinite loop. This avoids some valgrind errors. Backport of: PR #3512 commit fee423bb PR #3510 commit a486561b PR #3455 commit c8e89d58 PR #3449 commit 7031ddac Issue 1: sh.bittable_size is a size_t but i is and int, which can result in freelist == -1 if sh.bittable_size exceeds an int. This seems to result in an OPENSSL_assert due to invalid allocation size, so maybe that is "ok." Worse, if sh.bittable_size is exactly 1<<31, then this becomes an infinite loop (because 1<<31 is a negative int, so it can be shifted right forever and sticks at -1). Issue 2: CRYPTO_secure_malloc_init() sets secure_mem_initialized=1 even when sh_init() returns 0. If sh_init() fails, we end up with secure_mem_initialized=1 but sh.minsize=0. If you then call secure_malloc(), which then calls, sh_malloc(), this then enters an infite loop since 0 << anything will never be larger than size. Issue 3: That same sh_malloc loop will loop forever for a size greater than size_t/2 because i will proceed (assuming sh.minsize=16): i=16, 32, 64, ..., size_t/8, size_t/4, size_t/2, 0, 0, 0, 0, .... This sequence will never be larger than "size". Reviewed-by:
-
Diego Santa Cruz authored
The password_callback() function does not necessarily NULL terminate the password buffer, the caller must use the returned length but the srp app uses this function as if it was doing NULL termination. This made the -passin and -passout options of "openssl srp" fail inexpicably and randomly or even crash. Fixed by enlarging the buffer by one, so that the maximum password length remains unchanged, and adding NULL termination upon return. [Rearrange code for coding style compliance in process.] Reviewed-by:
-
Andy Polyakov authored
Switch to TAP::Harness inadvertently masked test failures. Test::Harness::runtests was terminating with non-zero exit code in case of failure[s], while TAP::Harness apparently holds caller responsible for doing so. Reviewed-by:
-
- 21 May, 2017 1 commit
-
-
Rich Salz authored
update pkcs12, smime, ts apps. Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/3507) (cherry picked from commit 48b53522)
-
- 19 May, 2017 3 commits
-
-
Diego Santa Cruz authored
With the -list option the srp app loops on the main while() endlessly, whether users were given on the command line or not. The loop should be stopped when in list mode and there are no more users. Reviewed-by:
-
Matt Caswell authored
Fixes #1526 Reviewed-by:
-
Matt Caswell authored
Fixes #1526 Reviewed-by:
-
- 17 May, 2017 1 commit
-
-
Richard Levitte authored
Notifications can be (and should be) configured on account basis on the CI web site. This avoids getting emails to openssl-commits for personal accounts that also build OpenSSL stuff. Reviewed-by:
-
- 15 May, 2017 2 commits
-
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
- 12 May, 2017 1 commit
-
-
Todd Short authored
Reviewed-by:
-
- 11 May, 2017 5 commits
-
-
Richard Levitte authored
BIO_socket_ioctl is only implemented on VMS for VMS version 7.0 and up, but since we only support version 7.1 and up, there's no need to check the VMS version. Reviewed-by:
-
Richard Levitte authored
Not exactly everywhere, but in those source files where stdint.h is included conditionally, or where it will be eventually Reviewed-by:
-
Patrick Steuer authored
crypto/asn1/a_strex.c: Type of width variable in asn1_valid_host function needs to be changed from char to signed char to avoid build error due to '-Werror=type-limits'. Signed-off-by:
Patrick Steuer <psteuer@mail.de> Reviewed-by:
-
Tomas Mraz authored
Allow conversion of existing requests to certificates again. Fixes the issue #3396 Reviewed-by:
-
Pauli authored
The second BN_is_zero test can never be true. Reviewed-by:
-
- 10 May, 2017 4 commits
-
-
Rich Salz authored
Reviewed-by:
-
Matt Caswell authored
Test that custom extensions still work even after a change in SSL_CTX due to SNI. See #2180. Reviewed-by:
-
Matt Caswell authored
The function SSL_set_SSL_CTX() can be used to swap the SSL_CTX used for a connection as part of an SNI callback. One result of this is that the s->cert structure is replaced. However this structure contains information about any custom extensions that have been loaded. In particular flags are set indicating whether a particular extension has been received in the ClientHello. By replacing the s->cert structure we lose the custom extension flag values, and it appears as if a client has not sent those extensions. SSL_set_SSL_CTX() should copy any flags for custom extensions that appear in both the old and the new cert structure. Fixes #2180 Reviewed-by:
-
Richard Levitte authored
TAP:Harness came along in perl 5.10.1, and since we claim to support perl 5.10.0 in configuration and testing, we can only load it conditionally. The main reason to use TAP::Harness rather than Test::Harness is its capability to merge stdout and stderr output from the test recipes, which Test::Harness can't. The merge gives much more comprehensible output when testing verbosely. Reviewed-by:
-
- 09 May, 2017 1 commit
-
-
Matt Caswell authored
This trace option does not appear in Configure as a separate option and is undocumented. It can be switched on using "-DOPENSSL_SSL_TRACE_CRYPTO", however this does not compile in master or in any 1.1.0 released version. (cherry picked from commit eee2750b ) Reviewed-by:
-
- 08 May, 2017 1 commit
-
-
Meena Vyas authored
Fixed compilation warning in file aesgcm.c Reviewed-by:
-
- 05 May, 2017 2 commits
-
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
Perl, multiple versions, for some reason occasionally takes issue with letter b[?] in ox([0-9a-f]+) regex. As result some constants, such as 0xb1 came out wrong when generating code for MASM. Fixes GH#3241. Reviewed-by:
-
- 04 May, 2017 2 commits
-
-
Rich Salz authored
Reviewed-by:
-
Matt Caswell authored
The init code uses DSO_dsobyaddr() to leak a reference to ourselves to ensure we remain loaded until atexit() time. In some circumstances that can fail and leave stale errors on the error queue. Fixes #3372 Reviewed-by:
-
- 02 May, 2017 2 commits
-
-
Rich Salz authored
Fixes #2360 Reviewed-by:
-
Matt Caswell authored
Fixes #1653 reported by Guido Vranken Reviewed-by:
-
