- Nov 07, 2017
-
-
Matt Caswell authored
If SSL_read() is called with a zero length buffer, and we read a zero length record then we should mark that record as read. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4686)
-
Matt Caswell authored
Normally TLSProxy waits for the s_server process to finish before continuing. However in cases where serverconnects > 1 we need to keep the s_server process around for a later test so we continue immediately. This means that TAP test output can end up being printed to stdout at the same time as s_server is printing stuff. This confuses the test runner and can cause spurious test failures. This commit introduces a small delay in cases where serverconnects > 1 in order to give s_server enough time to finish what it was doing before we continue to the next test. Fixes #4129 Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4661)
-
Matt Caswell authored
There were 4 macros in ocsp.h that have not worked since 1.1.0 because they attempt to access the internals of an opaque structure. For OCSP_REQUEST_sign() applications should use OCSP_request_sign() instead. For OCSP_BASICRESP_sign() applications should use OCSP_basic_sign() instead. For OCSP_REQUEST_verify() applications should use OCSP_request_verify() instead. For OCSP_BASICRESP_verify() applications should use OCSP_basic_verify() instead. Reviewed-by:
Ben Kaduk <kaduk@mit.edu> Reviewed-by:
-
- Nov 05, 2017
-
-
Richard Levitte authored
Instead of having perl modules under test/testlib and util, consolidate them all to be inside util/perl. (this is an adaptation of the part of #4069 that wasn't included in #4666) Reviewed-by:
Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4667)
-
Richard Levitte authored
File::Glob::glob is deprecated, it's use generates this kind of message: File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at ../master/Configure line 277. The first idea was to use a construction that makes the caller glob() use File::Glob::bsd_glob(). That turned out not to work well everywhere, so instead, we make our own wrapper, OpenSSL::Glob and use that. Fixes #4636 (this is an adaptation of #4040 and part of #4069, for 1.1.0) Reviewed-by: -
Andy Polyakov authored
It's not clear if it's a feature or bug, but binutils-2.29[.1] interprets 'adr' instruction with Thumb2 code reference differently, in a way that affects calculation of addresses of constants' tables. Reviewed-by:
Tim Hudson <tjh@openssl.org> Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/4669) (cherry picked from commit b82acc3c)
-
- Nov 03, 2017
-
-
FdaSilvaYY authored
Duplicated tests descriptions Backport of #3580 to 1.1.0 plus a few other typo fixes found at fligth. Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> Reviewed-by:
-
Pavel Kopyl authored
CLA: trivial Reviewed-by:
-
Pavel Kopyl authored
CLA: trivial Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
- Nov 02, 2017
-
-
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Reviewed-by: -
Andy Polyakov authored
Credit to OSS-Fuzz for finding this. CVE-2017-3736 Reviewed-by: -
Richard Levitte authored
In OpenSSL pre 1.1.0, 'openssl x509 -CAkeyformat engine' was possible and supported. In 1.1.0, a small typo ('F' instead of 'f') removed that possibility. This restores the pre 1.1.0 behavior. Fixes #4366 Reviewed-by:
-
- Nov 01, 2017
-
-
Pauli authored
information about the length of the scalar used in ECDSA operations from a large number (2^32) of signatures. This doesn't rate as a CVE because: * For the non-constant time code, there are easier ways to extract more information. * For the constant time code, it requires a significant number of signatures to leak a small amount of information. Thanks to Neals Fournaise, Eliane Jaulmes and Jean-Rene Reinhard for reporting this issue. Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4576) (cherry picked from commit 4a089bbd)
-
Pauli authored
information about the length of a value used in DSA operations from a large number of signatures. This doesn't rate as a CVE because: * For the non-constant time code, there are easier ways to extract more information. * For the constant time code, it requires a significant number of signatures to leak a small amount of information. Thanks to Neals Fournaise, Eliane Jaulmes and Jean-Rene Reinhard for reporting this issue. Reviewed-by:
-
- Oct 31, 2017
-
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
This version was a direct port from 1.1.1-dev, which has a different source structure for the docs. Adjustment done. Reviewed-by:
-
Richard Levitte authored
Missing names slipped through Reviewed-by:
-
Baptiste Jonglez authored
The check should reject kernel versions < 4.1.0, not <= 4.1.0. The issue was spotted on OpenSUSE 42.1 Leap, since its linux/version.h header advertises 4.1.0. CLA: trivial Fixes: 7f458a48 ("ALG: Add AFALG engine") Signed-off-by:
Baptiste Jonglez <git@bitsofnetworks.org> Reviewed-by:
-
Baptiste Jonglez authored
The eventfd syscall is deprecated and is not available on aarch64, causing build to fail: engines/e_afalg.c: In function 'eventfd': engines/e_afalg.c:108:20: error: '__NR_eventfd' undeclared (first use in this function) return syscall(__NR_eventfd, n); ^ Instead, switch to the newer eventfd2 syscall, which is supposed to be supported by all architectures. This kind of issues would be avoided by simply using the eventfd(2) wrapper from the libc, but there must be subtle reasons not to... Tested on a aarch64 system running OpenSUSE Leap 42.1 (gcc118 from https://cfarm.tetaneutral.net/machines/list/ ) and also cross-compiling for aarch64 with LEDE (kernel 4.9). This properly fixes #1685. CLA: trivial Fixes: 7f458a48 ("ALG: Add AFALG engine") Signed-off-by: -
Richard Levitte authored
No two public key ASN.1 methods with the same pkey_id can be registered at the same time. Reviewed-by:
-
Richard Levitte authored
[skip ci] Reviewed-by:
-
- Oct 30, 2017
-
-
Kurt Roeckx authored
This restores the 1.0.2 behaviour Reviewed-by:
Benjamin Kaduk <bkaduk@akamai.com> GH: #4613 (cherry picked from commit ffd23209)
-
- Oct 28, 2017
-
-
Rich Salz authored
Thanks to Remi Gacogne for pointing this out. Also indented the two macro bodies Reviewed-by:
-
- Oct 27, 2017
-
-
Andy Polyakov authored
Thanks to David Benjamin for spotting this. Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
-
- Oct 26, 2017
-
-
Matt Caswell authored
The functions strcasecmp() and strncasecmp() will use locale specific rules when performing comparison. This could cause some problems in certain locales. For example in the Turkish locale an 'I' character is not the uppercase version of 'i'. However IA5 strings should not use locale specific rules, i.e. for an IA5 string 'I' is uppercase 'i' even if using the Turkish locale. This fixes a bug in name constraints checking reported by Thomas Pornin (NCCGroup). This is not considered a security issue because it would require both a Turkish locale (or other locale with similar issues) and malfeasance by a trusted name-constrained CA for a certificate to pass name constraints in error. The constraints also have to be for excluded sub-trees which are extremely rare. Failure to match permitted subtrees is a bug, not a vulnerability. Reviewed-by:
-
Paul Yang authored
<compar> to <compare> to match the var name in function prototype Reviewed-by:
Paul Dale <paul.dale@oracle.com> Reviewed-by:
-
- Oct 25, 2017
-
-
Richard Levitte authored
Reviewed-by:
-
- Oct 24, 2017
-
-
Richard Levitte authored
asn1_item_embed_free() will try unlocking and fail in this case, and since the new item was just allocated on the heap, free it directly with OPENSSL_free() instead. Reviewed-by:
-
Richard Levitte authored
The previous change with this intention didn't quite do it. An embedded item must not be freed itself, but might potentially contain non-embedded elements, which must be freed. So instead of calling ASN1_item_ex_free(), where we can't pass the embed flag, we call asn1_item_embed_free() directly. This changes asn1_item_embed_free() from being a static function to being a private non-static function. Reviewed-by:
-
Matt Caswell authored
The lhash expand() function can fail if realloc fails. The previous implementation made changes to the structure and then attempted to do a realloc. If the realloc failed then it attempted to undo the changes it had just made. Unfortunately changes to lh->p were not undone correctly, ultimately causing subsequent expand() calls to increment num_nodes to a value higher than num_alloc_nodes, which can cause out-of-bounds reads/ writes. This is not considered a security issue because an attacker cannot cause realloc to fail. This commit moves the realloc call to near the beginning of the function before any other changes are made to the lhash structure. That way if a failure occurs we can immediately fail without having to undo anything. Thanks to Pavel Kopyl (Samsung) for reporting this issue. Reviewed-by:
Viktor Dukhovni <viktor@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4550) (cherry picked from commit 4ce8bebc)
-
Xiangyu Bu authored
CLA: trivial Reviewed-by:
-
- Oct 23, 2017
-
-
Richard Levitte authored
An embedded item wasn't allocated separately on the heap, so don't free it as if it was. Issue discovered by Pavel Kopyl Reviewed-by:
-
Matt Caswell authored
The function BN_security_bits() uses the values from SP800-57 to assign security bit values for different FF key sizes. However the value for 192 security bits is wrong. SP800-57 has it as 7680 but the code had it as 7690. Reviewed-by:
-
