Don't expose purely libcrypto internal symbols, even to libssl.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

When compressing, the output / input is a binary format, not a text
format like BASE64.  This is important on Windows, where a ^Z in a
text file is seen as EOF, and there could be a ^Z somewhere in a
compressed file, cutting it short as input.

Reviewed-by: Matt Caswell <matt@openssl.org>

The handling was Unix centric, already in Configure.  Change that to
just collect the value and let the build file templates figure out
what to do with it.

Reviewed-by: Matt Caswell <matt@openssl.org>

Instead of absolute hard coding of the libz library name, have it use
the macro LIBZ, which is set to defaults we know in case it's
undefined.

This allows our configuration to set something that's sane on current
or older platforms, and allows the user to override it by defining
LIBZ themselves.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

The macros ZLIB and ZLIB_SHARED weren't appropriately defined,
deviating wrongly from how they worked in earlier OpenSSL versions.
So, restore it so that ZLIB is defined if configured "enable-zlib" and
so that ZLIB and ZLIB_SHARED are defined if configured
"enable-zlib-dynamic".

Additionally, correct the interpretation of the --with-zlib-lib value
on Windows and VMS, where it's used to indicate the actual zlib
zlib library file / logical name, as that can differ depending on zlib
version and packaging on those platforms.

Finally for Windows and VMS, we also define the macro LIBZ with that
file name / logical name when configured "zlib-dynamic", so the
compression unit can pick it up and use it.

Reviewed-by: Matt Caswell <matt@openssl.org>

The above config options were failing in test_ssl_old.

Reviewed-by: Richard Levitte <levitte@openssl.org>

There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Tweak to documentation following feedback

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Documentation fix ups as a result of feedback received.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

The no-op de-init macros may fail because of extraneous ";", so we use
a slightly different construct instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

libssl needs to have access to some internal libcrypto symbols.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

There was a lot of naming inconsistency, so we try and standardise on
one form.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

CONF_modules_free() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

ENGINE_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

OBJ_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

EVP_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

BIO_sock_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

CRYPTO_cleanup_all_ex_data() should not be called expicitly - we should
leave auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

RAND_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

The conditional compile logic wasn't quite right in speed.c for when
both OPENSSL_NO_DSA and OPENSSL_NO_EC are defined.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

SSL_COMP_free_compression_methods() should not be called expicitly - we
should leave auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

ERR_free_strings() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

COMP_zlib_cleanup() should not be called expicitly - we should leave
auto-deinit to clean this up instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Setting the debug callback on the in and out BIOs were done too early.
No debug callback was set on the zlib filter BIO.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add an accessor for SSL_CTX.

Since libssl was made opaque, there is no way for users to access the
cipher_list, while users can set the cipher_list by
SSL_CTX_set_cipher_list().

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix a compile failure with no-posix-io

Reviewed-by: Tim Hudson <tjh@openssl.org>

The function pqueue_print is not exported and is never called. Therefore
we should delete it.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

The no-tls option was failing in the tests. This fixes it.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Misc fixes to get no-nextprotoneg config option working again.

Reviewed-by: Rich Salz <rsalz@openssl.org>

When a file is opened with BIO_new_file(), make sure that the internal
mode TEXT vs BINARY setting reflects what's given in the mode string.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Code without PEDANTIC has intentional "undefined" behaviour. To get best
coverage for both PEDANTIC and non-PEDANTIC codepaths, run the sanitizer
builds in two different configurations:
1) Without PEDANTIC but with alignment checks disabled.
2) With PEDANTIC.

To not overload Travis too much, run one build with clang and the other
with gcc (chosen at random).

Also remove a micro-optimization in CAST code to be able to
-fsanitize=shift. Whether shift sanitization is meaningful for crypto or
an obstacle is debatable but since this appears to be the only offender,
we might as well keep the check for now.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

In Travis, do --strict-warnings on BUILDONLY configurations. This
ensures that the tests run even if --strict-warnings fail, and avoids
hiding unrelated test failures.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The simple reason is that the pre-generated files are mainly for Unix.
The VMS variants look slightly different, so comparing will always fail.

Reviewed-by: Emilia Käsper <emilia@openssl.org>