A new X509_VERIFY_PARAM_set_auth_level() function sets the
authentication security level.  For verification of SSL peers, this
is automatically set from the SSL security level.  Otherwise, for
now, the authentication security level remains at (effectively) 0
by default.

The new "-auth_level" verify(1) option is available in all the
command-line tools that support the standard verify(1) options.

New verify(1) tests added to check enforcement of chain signature
and public key security levels.  Also added new tests of enforcement
of the verify_depth limit.

Updated documentation.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Two renamed functions were forgotten in util/libcrypto.num

Reviewed-by: Matt Caswell <matt@openssl.org>

Also fixed a style issue

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Numerous fixups based on feedback of the DSA opacity changes.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

A number of getters/setters have been added for examining DSA objects, as
well as a whole set of functions for creating and buildingup DSA_METHODs.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Move the dsa_method structure out of the public header file, and provide
getter and setter functions for creating and modifying custom DSA_METHODs.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Move the dsa_st structure out of the public header file. Add some accessor
functions to enable access to the internal fields, and update all internal
usage to use the new functions.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Within OpenSSL::Test, all commands end up existing in two variants,
one that has redirections that are needed internally to work well
together with the test harness, and one without those redirections.

Depending on what the result is going to be used for, the caller may
want one for or the other, so we give them the possibility.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Currently on every BIO mem read operation the remaining data is reallocated.
This commit solves the issue.
BIO mem structure includes additional pointer to the read position.
On every read the pointer moves instead of reallocating the memory for the remaining data.
Reallocation accures before write and some ioctl operations, if the read pointer doesn't point on the beginning of the buffer.
Also the flag is added to rewind the read pointer without losing the data.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

InitOnceExecuteOnce returns nonzero on success:
MSDN: "If the function succeeds, the return value is nonzero."

So return 1 if it is nonzero, 0 others.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

The logic to find out of there are any .d files newer than Makefile is
sound.  Checking the result was less so.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Don't decode a public key in X509_PUBKEY_get0(): that is handled when
the key is parsed using x509_pubkey_decode() instead.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reverts commit 087ca80a



Instead of battling the odd format of argv given to main() in default
P64 mode, tell the compiler to make it an array of 64-bit pointers
when compiling in P64 mode.

A note is added in NOTES.VMS regarding minimum DEC C version.

Reviewed-by: Andy Polyakov <appro@openssl.org>

- In Configure, register the perl interpreter used to run Configure,
  so that's the one being used throughout instead of something else
  that Configure happens to find.  This is helpful for using a perl
  version that's not necessarely first in $PATH:

    /opt/perl/5.22.1/bin/perl ./Configure

- Make apps/tsget a generated file, just like apps/CA.pl, so the
  perl interpreter registered by Configure becomes the hashbang path
  instead of a hardcoded /usr/bin/perl

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Emilia Käsper <emilia@openssl.org>

This minimizes inter-block overhead. Performance gain naturally
varies from case to case, up to 10% was spotted so far. There is
one thing to recognize, given same circumstances gain would be
higher faster computational part is. Or in other words biggest
improvement coefficient would have been observed with assembly.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

On the other hand, have run() display the display variant.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Because some operating systems have executable extensions, typically
".exe", we need to append it when looking for files in test() and
app() (or rather, their subroutines).

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

CRYPTO_mem_leaks attempts to adjust the count of bytes leaks to not
include the BIO that is being used to print the results out. However this
does not work properly. In all internal cases we switch off recording
the memory allocation during creation of the BIO so it makes no difference.
In other cases if the BIO allocates any additional memory during
construction then the adjustment will be wrong anyway. It also skips over
the BIO memory during print_leak anyway, so the BIO memory is never
added into the total. In other words this was broken in lots of ways and
has been since it was first added.

The simplest solution is just to make it the documented behaviour that
you must turn off memory logging when creating the BIO, and remove all
the adjustment stuff completely. The adjustment code was only ever in
master and never made it to a release branch so there is no loss of
functionality.

This commit also fixes a compilation failure when using
enable-crypto-mdebug.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix buffer overrun in asn1_get_length().

Reproducer: asn1parse-reproduce crash-6bfd417f47bc940f6984f5e639b637fd4e6074bc

Fix length calculations.

Reproducer: asn1parse-reproduce crash-1819d0e54cd2b0430626c59053e6077ef04c2ffb
Reproducer: asn1parse-reproduce crash-9969db8603e644ddc0ba3459b51eac7a2c4b729b

Make i long.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The argument 'argv' in 'main' is a short pointer to a short pointer on
VMS, regardless of initial pointer size.  We must therefore make sure
that 'copy_argv' gets a 32-bit pointer for argv, and that the copied
argv is used for the rest of main().

This introduces the local type argv_t, which will have correct pointer
size in all cases (and be harmless on all other platforms) as well as
the macro Argv, which is defined as 'copied_argv' or 'argv', as the
case may be.

Reviewed-by: Andy Polyakov <appro@openssl.org>

setbuf() is only for 32-bit pointers.  If compiled with /POINTER_SIZE=64,
we get a nasty warning about possible loss of data.  However, since
the only pointer used in the call is a FILE *, and the C RTL shouldn't
give us a pointer above the first 4GB, it's safe to turn off the
warning for this call.

Reviewed-by: Andy Polyakov <appro@openssl.org>

On VMS, the C compiler can work with 32-bit and 64-bit pointers, and
the command line determines what the initial pointer size shall be.

However, there is some functionality that only works with 32-bit
pointers.  In this case, it's gethostbyname(), getservbyname() and
accompanying structures, so we need to make sure that we define our
own pointers as 32-bit ones.

Furthermore, there seems to be a bug in VMS C netdb.h, where struct
addrinfo is always defined with 32-bit pointers no matter what, but
the functions handling it are adapted to the initial pointer size.
This leads to pointer size warnings when compiling with
/POINTER_SIZE=64.  The workaround is to force struct addrinfo to be
the 64-bit variant if the initial pointer size is 64.

Reviewed-by: Andy Polyakov <appro@openssl.org>

'proto' wasn't properly used as a fallback in all appropriate cases.

Reviewed-by: Rich Salz <rsalz@openssl.org>

It displays the command's exit code as well.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

If the command file that app(), test(), perlapp(9 and perltest() are
looking for doesn't exist in the build tree, look for it in the source
tree as well.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Since OpenSSL::Test only redirects stderr to /dev/null when being run
through non-verbose test harness, this change allows the stderr output
to be displayed when verbosity is requested.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

The intention with that option is to allow extra flags to the perl
interpreter itself.

Reviewed-by: Emilia Käsper <emilia@openssl.org>