Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Using an enum with -Wswitch means all lookup routines handle
all cases.  Remove X509_LU_PKEY which was never used.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The new accessors SSL_get_client_random, SSL_get_server_random and
SSL_SESSION_get_master_key should return a size_t to match the type of the
|outlen| parameter.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Change the new SSL_get_client_random(), SSL_get_server_random() and
SSL_SESSION_get_master_key() functions to use size_t for |outlen| instead of
int.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Tor uses these values to implement a low-rent clone of RFC 5705 (which,
in our defense, we came up with before RFC 5705 existed).  But now that
ssl_st is opaque, we need another way to get at them.

Includes documentation, with suitable warnings about not actually
using these functions.

Signed-off-by: Nick Mathewson <nickm@torproject.org>
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

On the server side, if you want to know which ciphers the client
offered, you had to use session->ciphers.  But that field is no
longer visible, so we need a method to get at it.

Signed-off-by: Nick Mathewson <nickm@torproject.org>
Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

In master, the 'dh' command is gone, so use 'dhparam' instead to
determine if we're compiled with DH.

Also, set "@SECLEVEL=1" for the weak DH test, so that it actually
passes.

Reviewed-by: Dr Stephen Henson <steve@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add support for PKCS#8 private key encryption using the scrypt algorithm
in the pkcs8 utility. Update documentation.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This adds a new function which will encrypt a private key using PKCS#8
based on an X509_ALGOR structure and reimplements PKCS8_encrypt to use it.

Update pkcs8 utlity to use PKCS8_set0_pbe.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Set a specific error if the parameters are otherwise valid but exceed the
memory limit.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add support for PKCS#12 and PBKDF2 password based encryption tests. Add
additional test data.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Also add more ciphersuite test coverage, and a negative test for
512-bit DHE.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 1ee85aab)

The size of the SRP extension can never be negative (the variable
|size| is unsigned). Therefore don't check if it is less than zero.

RT#3862

Reviewed-by: Richard Levitte <levitte@openssl.org>

The return value of i2d functions can be negative if an error occurs.
Therefore don't assign the return value to an unsigned type and *then*
check if it is negative.

RT#3862

Reviewed-by: Richard Levitte <levitte@openssl.org>

The members of struct timeval on OpenVMS are unsigned. The logic for
calculating timeouts needs adjusting to deal with this.

RT#3862

Reviewed-by: Richard Levitte <levitte@openssl.org>

RT#3860

Reviewed-by: Tim Hudson <tjh@openssl.org>

RT#3858

Reviewed-by: Tim Hudson <tjh@openssl.org>

RT#3859

Reviewed-by: Tim Hudson <tjh@openssl.org>

The "out" variable is used for both key and csr.  Close it after
writing the first one so it can be re-used when writing the other.

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Thanks to Brian Carpenter <brian.carpenter@gmail.com> for finding this.

Reviewed-by: Tim Hudson <tjh@openssl.org>

If the record received is for a version that we don't support, previously we
were sending an alert back. However if the incoming record already looks
like an alert then probably we shouldn't do that. So suppress an outgoing
alert if it looks like we've got one incoming.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

The 'http proxy' commit broke s_client default host/port value.
Thanks to Matt for the simplest fix.

Reviewed-by: Matt Caswell <matt@openssl.org>

Version negotiation was broken (one of the late changes in the review
process broke it). The problem is that TLS clients do not set first_packet,
whereas TLS/DTLS servers and DTLS clients do. The simple fix is to set
first_packet for TLS clients too.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

bn_get_bits5 was overstepping array boundary by 1 byte. It was exclusively
read overstep and data could not have been used. The only potential problem
would be if array happens to end on the very edge of last accesible page.

Reviewed-by: Richard Levitte <levitte@openssl.org>

RT#3852

Reviewed-by: Richard Levitte <levitte@openssl.org>

The update: target in engines/ didn't recurse into engines/ccgost.
The update: and depend: targets in engines/ccgost needed a fixup.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

The certificate masks are used to select which ciphersuite we are going to
use. The variables |emask_k| and |emask_a| relate to export grade key
exchange and authentication respecitively. The variables |mask_k| and
|mask_a| are the equivalent versions for non-export grade. This fixes an
instance where the two usages of export/non-export were mixed up. In
practice it makes little difference since it still works!

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove support for the two export grade static DH ciphersuites. These two
ciphersuites were newly added (along with a number of other static DH
ciphersuites) to 1.0.2. However the two export ones have *never* worked
since they were introduced. It seems strange in any case to be adding new
export ciphersuites, and given "logjam" it also does not seem correct to
fix them.

Reviewed-by: Richard Levitte <levitte@openssl.org>

If BN_rand is called with |bits| set to 1 and |top| set to 1 then a 1 byte
buffer overflow can occur. There are no such instances within the OpenSSL at
the moment.

Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke, Filip Palian for
discovering and reporting this issue.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.

Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Given the pervasive nature of TLS extensions it is inadvisable to run
OpenSSL without support for them. It also means that maintaining
the OPENSSL_NO_TLSEXT option within the code is very invasive (and probably
not well tested). Therefore it is being removed.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in.  This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.

This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.

Reviewed-by: Rich Salz <rsalz@openssl.org>