The members of struct timeval on OpenVMS are unsigned. The logic for
calculating timeouts needs adjusting to deal with this.

RT#3862

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit fc52ac90)

Reviewed-by: Matt Caswell <matt@openssl.org>

RT#3860

Reviewed-by: Matt Caswell <matt@openssl.org>

RT#3858

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 71f6130b)

RT#3859

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 60c268b2)

If the record received is for a version that we don't support, previously we
were sending an alert back. However if the incoming record already looks
like an alert then probably we shouldn't do that. So suppress an outgoing
alert if it looks like we've got one incoming.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

bn_get_bits5 was overstepping array boundary by 1 byte. It was exclusively
read overstep and data could not have been used. The only potential problem
would be if array happens to end on the very edge of last accesible page.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 69567687)

RT#3852

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 86e5d1e3)

BLKINIT optimization worked on T4, but for some reason appears "too
aggressive" for T3 triggering intermiitent EC failures. It's not clear
why only EC is affected...

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 579734ce)

The update: target in engines/ didn't recurse into engines/ccgost.
The update: and depend: targets in engines/ccgost needed a fixup.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 8b822d25)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 6f45032f)

Conflicts:
	apps/Makefile

We had updates of certain header files in both Makefile.org and the
Makefile in the directory the header file lived in.  This is error
prone and also sometimes generates slightly different results (usually
just a comment that differs) depending on which way the update was
done.

This removes the file update targets from the top level Makefile, adds
an update: target in all Makefiles and has it depend on the depend: or
local_depend: targets, whichever is appropriate, so we don't get a
double run through the whole file tree.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0f539dc1)

Conflicts:
	Makefile.org
	apps/Makefile
	test/Makefile

The certificate masks are used to select which ciphersuite we are going to
use. The variables |emask_k| and |emask_a| relate to export grade key
exchange and authentication respecitively. The variables |mask_k| and
|mask_a| are the equivalent versions for non-export grade. This fixes an
instance where the two usages of export/non-export were mixed up. In
practice it makes little difference since it still works!

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit fdfe8b06)

Remove support for the two export grade static DH ciphersuites. These two
ciphersuites were newly added (along with a number of other static DH
ciphersuites) to 1.0.2. However the two export ones have *never* worked
since they were introduced. It seems strange in any case to be adding new
export ciphersuites, and given "logjam" it also does not seem correct to
fix them.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 13f8eb47)

Conflicts:
	CHANGES

If BN_rand is called with |bits| set to 1 and |top| set to 1 then a 1 byte
buffer overflow can occur. There are no such instances within the OpenSSL at
the moment.

Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke, Filip Palian for
discovering and reporting this issue.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

The functions BN_rshift and BN_lshift shift their arguments to the right or
left by a specified number of bits. Unpredicatable results (including
crashes) can occur if a negative number is supplied for the shift value.

Thanks to Mateusz Kocielski (LogicalTrust), Marek Kroemeke and Filip Palian
for discovering and reporting this issue.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 7cc18d81)

Conflicts:
	crypto/bn/bn.h
	crypto/bn/bn_err.c

If a client receives a bad hello request in DTLS then the alert is not
sent correctly.

RT#2801

Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(cherry picked from commit 4dc1aa04)

40 bit ciphers are limited to 512 bit RSA, 56 bit ciphers to 1024 bit.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit ac38115c)

Also reorder preferences to prefer prime curves to binary curves, and P-256 to everything else.

The result:

$ openssl s_server -named_curves "auto"

This command will negotiate an ECDHE ciphersuite with P-256:

$ openssl s_client

This command will negotiate P-384:

$ openssl s_client -curves "P-384"

This command will not negotiate ECDHE because P-224 is disabled with "auto":

$ openssl s_client -curves "P-224"

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Since the client has no way of communicating her supported parameter
range to the server, connections to servers that choose weak DH will
simply fail.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

- Do not advise generation of DH parameters with dsaparam to save
computation time.
- Promote use of custom parameters more, and explicitly forbid use of
built-in parameters weaker than 2048 bits.
- Advise the callback to ignore <keylength> - it is currently called
with 1024 bits, but this value can and should be safely ignored by
servers.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The default bitlength is now 2048. Also clarify that either the number
of bits or the generator must be present:

$ openssl dhparam -2
and
$ openssl dhparam 2048
generate parameters but
$ openssl dhparam
does not.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Signed-off-by: Rich Salz <rsalz@openssl.org>

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 00d565cf)

Backport old patch to make it work in mixture of perls for Windows.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Cherry-picked from 7bb98eee

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit c490a551)

The big "don't check for NULL" cleanup requires backporting some
of the lowest-level functions to actually do nothing if NULL is
given.  This will make it easier to backport fixes to release
branches, where master assumes those lower-level functions are "safe"

This commit addresses those tickets: 3798 3799 3801.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 82c4a079)

The function obj_cmp() (file crypto/objects/obj_dat.c) can in some
situations call memcmp() with a null pointer and a zero length.

This is invalid behaviour. When compiling openssl with undefined
behaviour sanitizer (add -fsanitize=undefined to compile flags) this
can be seen. One example that triggers this behaviour is the pkcs7
command (but there are others, e.g. I've seen it with the timestamp
function):
apps/openssl pkcs7 -in test/testp7.pem

What happens is that obj_cmp takes objects of the type ASN1_OBJECT and
passes their ->data pointer to memcmp. Zero-sized ASN1_OBJECT
structures can have a null pointer as data.

RT#3816

Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2b8dc08b)

Currently we set change_cipher_spec_ok to 1 before calling
ssl3_get_cert_verify(). This is because this message is optional and if it
is not sent then the next thing we would expect to get is the CCS. However,
although it is optional, we do actually know whether we should be receiving
one in advance. If we have received a client cert then we should expect
a CertificateVerify message. By the time we get to this point we will
already have bombed out if we didn't get a Certificate when we should have
done, so it is safe just to check whether |peer| is NULL or not. If it is
we won't get a CertificateVerify, otherwise we will. Therefore we should
change the logic so that we only attempt to get the CertificateVerify if
we are expecting one, and not allow a CCS in this scenario.

Whilst this is good practice for TLS it is even more important for DTLS.
In DTLS messages can be lost. Therefore we may be in a situation where a
CertificateVerify message does not arrive even though one was sent. In that
case the next message the server will receive will be the CCS. This could
also happen if messages get re-ordered in-flight. In DTLS if
|change_cipher_spec_ok| is not set and a CCS is received it is ignored.
However if |change_cipher_spec_ok| *is* set then a CCS arrival will
immediately move the server into the next epoch. Any messages arriving for
the previous epoch will be ignored. This means that, in this scenario, the
handshake can never complete. The client will attempt to retransmit
missing messages, but the server will ignore them because they are the wrong
epoch. The server meanwhile will still be waiting for the CertificateVerify
which is never going to arrive.

RT#2958

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit a0bd6493)

Matt's note: I added a call to X509V3err to Kurt's original patch.

RT#3840

Signed-off-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 344c271e)

clang says: "s_cb.c:958:9: error: implicitly declaring library function
'memcpy'"

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 8f744cce)

Conflicts:
	apps/s_cb.c

If sk_SSL_CIPHER_new_null() returns NULL then ssl_bytes_to_cipher_list()
should also return NULL.

Based on an original patch by mrpre <mrpre@163.com>.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 14def5f5)

Reviewed-by: Rich Salz <rsalz@akamai.com>

Ensure all fatal errors transition into the new error state for DTLS.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cefc9391)

Conflicts:
	ssl/d1_srvr.c

Ensure all fatal errors transition into the new error state on the client
side.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cc273a93)

Conflicts:
	ssl/s3_clnt.c

Ensure all fatal errors transition into the new error state on the server
side.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit cf9b0b6f)

Conflicts:
	ssl/s3_srvr.c

Reusing an SSL object when it has encountered a fatal error can
have bad consequences. This is a bug in application code not libssl
but libssl should be more forgiving and not crash.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit a89db885)

Conflicts:
	ssl/s3_srvr.c
	ssl/ssl_stat.c

Remove dependency on ssl_locl.h from v3_scts.c, and incidentally fix a build problem with
kerberos (the dependency meant v3_scts.c was trying to include krb5.h, but without having been
passed the relevanant -I flags to the compiler)

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit d13bd613)

Conflicts:
	crypto/x509v3/v3_scts.c