- Nov 13, 2016
-
-
Matthias Kraft authored
Avoid a memory alignment issue. Signed-off-by: Matthias Kraft <Matthias.Kraft@softwareag.com> CLA: trivial Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1650) (cherry picked from commit af5883fe)
-
EasySec authored
Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1837) (cherry picked from commit a22f9c84)
-
EasySec authored
Replace the 'SSL' broken link with SSL_CTX_set_security_level which seems not being referenced from elsewhere Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1898) (cherry picked from commit e330f55d)
-
- Nov 12, 2016
-
-
enkore authored
CLA: trivial Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1909) (cherry picked from commit 625b9d6b)
-
Kurt Roeckx authored
llvm's ubsan reported: runtime error: negation of -9223372036854775808 cannot be represented in type 'int64_t' (aka 'long'); cast to an unsigned type to negate this value to itself Found using libfuzzer Reviewed-by: Rich Salz <rsalz@openssl.org> GH: #1908 (cherry picked from commit e80f3b6a)
-
- Nov 11, 2016
-
-
Andy Polyakov authored
In order to minimize dependency on assembler version a number of post-SSE2 instructions are encoded manually. But in order to simplify the procedure only register operands are considered. Non-register operands are passed down to assembler. Module in question uses pshufb with memory operands, and old [GNU] assembler can't handle it. Fortunately in this case it's possible skip just the problematic segment without skipping SSSE3 support altogether. Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (cherry picked from commit d89773d6)
-
Andy Polyakov authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (cherry picked from commit cebb1869)
-
Richard Levitte authored
When configured no-dso, there are no DSO_{whatever} macros defined. Therefore, before checking those, you have to check if OPENSSL_NO_DSO is defined. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1902) (cherry picked from commit 6e290a25)
-
- Nov 10, 2016
-
-
Richard Levitte authored
Apparently, pod2html doesn't add ".html" at the end of links, making them useless, so we need to fix that With thanks for the report to Michel <michel.sales@free.fr> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1897)
-
Matt Caswell authored
Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Matt Caswell authored
Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Matt Caswell authored
Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Matt Caswell authored
Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Richard Levitte authored
Reviewed-by: Matt Caswell <matt@openssl.org>
-
Andy Polyakov authored
This is done by taking one vector, "corrupting" last bit of the tag value and verifying that decrypt fails. Reviewed-by: Emilia Käsper <emilia@openssl.org>
-
Andy Polyakov authored
Reviewed-by: Emilia Käsper <emilia@openssl.org>
-
Dr. Stephen Henson authored
Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Dr. Stephen Henson authored
Don't set choice selector on parse failure: this can pass unexpected values to the choice callback. Instead free up partial structure directly. CVE-2016-7053 Thanks to Tyler Nighswander of ForAllSecure for reporting this issue. Reviewed-by: Richard Levitte <levitte@openssl.org>
-
Richard Levitte authored
The offset to the memory to clear was incorrect, causing a heap buffer overflow. CVE-2016-7054 Thanks to Robert Święcki for reporting this Reviewed-by: Rich Salz <rsalz@openssl.org> (cherry picked from commit b8e4011fb26364e44230946b87ab38cc1c719aae)
-
Andy Polyakov authored
Some of stone-age assembler can't cope with r0 in address. It's actually sensible thing to do, because r0 is shunted to 0 in address arithmetic and by refusing r0 assembler effectively makes you understand that. Reviewed-by: Rich Salz <rsalz@openssl.org> (cherry picked from commit a54aba53)
-
Andy Polyakov authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (cherry picked from commit 2fac86d9)
-
Andy Polyakov authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (cherry picked from commit dca2e0ee)
-
Richard Levitte authored
Skip the test if the value after ":" is a disabled algorithm, rather than failing it Reviewed-by: Matt Caswell <matt@openssl.org> (cherry picked from commit dfbdf4ab)
-
Richard Levitte authored
Reviewed-by: Matt Caswell <matt@openssl.org> (cherry picked from commit 586b79d8)
-
- Nov 09, 2016
-
-
EasySec authored
Reviewed-by: Richard Levitte <levitte@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1859) (cherry picked from commit 7bb37cb5)
-
Richard Levitte authored
For consistency, it's better to use the perl that was specified to Configure last time it was called. Use case: perl v5.8.8 was first along $PATH, perl v5.22.2 was available and specified as: PERL=/opt/local/bin/perl ./config. When make wanted to reconfigure and called './Configure reconf', configuration broke down, complaining about a perl that's too old. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1884) (cherry picked from commit 12ccb021)
-
- Nov 08, 2016
-
-
FdaSilvaYY authored
BN_RECP_CTX_new direclty use bn_init to avoid twice memset calls Reviewed-by: Kurt Roeckx <kurt@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1879) (cherry picked from commit 318447bc)
-
Rich Salz authored
Thanks to Falko Strenzke for bringing this to our attention. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1882) (cherry picked from commit e5e71f28)
-
Richard Levitte authored
libssl, not libddl. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1871) (cherry picked from commit b77b6127)
-
- Nov 07, 2016
-
-
FdaSilvaYY authored
and fix documentation. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1634) (cherry picked from commit 7cb1ecec)
-
Andrea Grandi authored
Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Rich Salz <rsalz@openssl.org> GH: #1834 (cherry picked from commit 27ed73a9)
-
David Benjamin authored
MD5/SHA1 and MDC-2 have special-case logic beyond the generic DigestInfo wrapping. Test that each of these works, including hash and length mismatches (both input and signature). Also add VerifyRecover tests. It appears 5824cc29 added support for VerifyRecover, but forgot to add the test data. Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Rich Salz <rsalz@openssl.org> GH: #1474 (cherry picked from commit f3205557)
-
David Benjamin authored
PKCS #1 v2.0 is the name of a document which specifies an algorithm RSASSA-PKCS1-v1_5, often referred to as "PKCS #1 v1.5" after an earlier document which specified it. This gets further confusing because the document PKCS #1 v2.1 specifies two signature algorithms, RSASSA-PKCS1-v1_5 and RSASSA-PSS. RSA_sign implements RSASSA-PKCS1-v1_5. Refer to the document using the RFC number which is easier to find anyway, and refer to the algorithm by its name. Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Rich Salz <rsalz@openssl.org> GH: #1474 (cherry picked from commit aa90ca11)
-
David Benjamin authored
RFC 3447, section 8.2.2, steps 3 and 4 states that verifiers must encode the DigestInfo struct and then compare the result against the public key operation result. This implies that one and only one encoding is legal. OpenSSL instead parses with crypto/asn1, then checks that the encoding round-trips, and allows some variations for the parameter. Sufficient laxness in this area can allow signature forgeries, as described in https://www.imperialviolet.org/2014/09/26/pkcs1.html Although there aren't known attacks against OpenSSL's current scheme, this change makes OpenSSL implement the algorithm as specified. This avoids the uncertainty and, more importantly, helps grow a healthy ecosystem. Laxness beyond the spec, particularly in implementations which enjoy wide use, risks harm to the ecosystem for all. A signature producer which only tests against OpenSSL may not notice bugs and accidentally become widely deployed. Thus implementations have a responsibility to honor the specification as tightly as is practical. In some cases, the damage is permanent and the spec deviation and security risk becomes a tax all implementors must forever pay, but not here. Both BoringSSL and Go successfully implemented and deployed RSASSA-PKCS1-v1_5 as specified since their respective beginnings, so this change should be compatible enough to pin down in future OpenSSL releases. See also https://tools.ietf.org/html/draft-thomson-postel-was-wrong-00 As a bonus, by not having to deal with sign/verify differences, this version is also somewhat clearer. It also more consistently enforces digest lengths in the verify_recover codepath. The NID_md5_sha1 codepath wasn't quite doing this right. Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Rich Salz <rsalz@openssl.org> GH: #1474 (cherry picked from commit 608a0264)
-
Matt Caswell authored
This partially reverts commit c636c1c4 . It also tweaks the documentation and comments in this area. On the client side the documented interface for SSL_CTX_set_verify()/SSL_set_verify() is that setting the flag SSL_VERIFY_PEER causes verfication of the server certificate to take place. Previously what was implemented was that if *any* flag was set then verification would take place. The above commit improved the semantics to be as per the documented interface. However, we have had a report of at least one application where an application was incorrectly using the interface and used *only* SSL_VERIFY_FAIL_IF_NO_PEER_CERT on the client side. In OpenSSL prior to the above commit this still caused verification of the server certificate to take place. After this commit the application silently failed to verify the server certificate. Ideally SSL_CTX_set_verify()/SSL_set_verify() could be modified to indicate if invalid flags were being used. However these are void functions! The simplest short term solution is to revert to the previous behaviour which at least means we "fail closed" rather than "fail open". Thanks to Cory Benfield for reporting this issue. Reviewed-by: Richard Levitte <levitte@openssl.org> (cherry picked from commit c8e2f98c)
-
Matt Caswell authored
We read it later in grow_init_buf(). If CCS is the first thing received in a flight, then it will use the init_msg from the last flight we received. If the init_buf has been grown in the meantime then it will point to some arbitrary other memory location. This is likely to result in grow_init_buf() attempting to grow to some excessively large amount which is likely to fail. In practice this should never happen because the only time we receive a CCS as the first thing in a flight is in an abbreviated handshake. None of the preceding messages from the server flight would be large enough to trigger this. Reviewed-by: Rich Salz <rsalz@openssl.org> (cherry picked from commit c4377574)
-
- Nov 06, 2016
-
-
Richard Levitte authored
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1772) (cherry picked from commit 475592e2)
-
Richard Levitte authored
If zlib-dynamic was given but not --with-zlib-lib, LIBZ was defined to the empty string. Instead, give it the default "ZLIB1". Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1772) (cherry picked from commit 111b234c)
-
Richard Levitte authored
VMS only unloads shared libraries at process rundown, so tell the OpenSSL code so by pretending we linked with -znodelete. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1862) (cherry picked from commit 1186a2b3)
-
- Nov 04, 2016
-
-
Richard Levitte authored
Since the local symbol table is looked up before the global symbol table, 'arch' assigned in the local symbol table of the DCL where MMS is called would be seen before the 'arch' defined in descrip.mms. Assigning it to the local symbol table in descrip.mms removes that issue. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/1853) (cherry picked from commit 3ee24d4a)
-