Fix builds config'd with no-ec and no-ec2m. Technically this combination is
redundant - but the fix is straight forward. Fix from OpenWrt.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Updated test/testssl script to include the new DTLS capability in ssltest.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 3c381e54)

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 98b8cdd3)

Conflicts:
	ssl/ssltest.c

Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 504e643e)

Conflicts:
	ssl/ssl_lib.c

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix some unsigned/signed warnings introduced as part of the fix
for CVE-2015-0293

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Reported by the LibreSSL project as a follow on to CVE-2015-0209

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update the NEWS file with the latest entries from CHANGES ready for the
release.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update CHANGES file with all the latest fixes ready for the release.

Reviewed-by: Richard Levitte <levitte@openssl.org>

There was a discrepancy between the 1.0.2 version of NEWS and the 1.0.1
version. This fixes it.

Reviewed-by: Richard Levitte <levitte@openssl.org>

There were some discrepancies in the CHANGES file between the 1.0.1 version
and 1.0.2. This corrects it.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove entries from CHANGES and NEWS from letter releases that occur *after*
the next point release. Without this we get duplicate entries for the same
issue appearing multiple times.

Reviewed-by: Richard Levitte <levitte@openssl.org>

This assert is reachable for servers that support SSLv2 and export ciphers.
Therefore, such servers can be DoSed by sending a specially crafted
SSLv2 CLIENT-MASTER-KEY.

Also fix s2_srvr.c to error out early if the key lengths are malformed.
These lengths are sent unencrypted, so this does not introduce an oracle.

CVE-2015-0293

This issue was discovered by Sean Burford (Google) and Emilia Käsper of
the OpenSSL development team.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

In PKCS#7, the ASN.1 content component is optional.
This typically applies to inner content (detached signatures),
however we must also handle unexpected missing outer content
correctly.

This patch only addresses functions reachable from parsing,
decryption and verification, and functions otherwise associated
with reading potentially untrusted data.

Correcting all low-level API calls requires further work.

CVE-2015-0289

Thanks to Michal Zalewski (Google) for reporting this issue.

Reviewed-by: Steve Henson <steve@openssl.org>

Fix segmentation violation when ASN1_TYPE_cmp is passed a boolean type. This
can be triggered during certificate verification so could be a DoS attack
against a client or a server enabling client authentication.

CVE-2015-0286

Reviewed-by: Richard Levitte <levitte@openssl.org>

If client auth is used then a server can seg fault in the event of a DHE
cipher being used and a zero length ClientKeyExchange message being sent
by the client. This could be exploited in a DoS attack.

CVE-2015-1787

Reviewed-by: Richard Levitte <levitte@openssl.org>

If a client renegotiates using an invalid signature algorithms extension
it will crash a server with a NULL pointer dereference.

Thanks to David Ramos of Stanford University for reporting this bug.

CVE-2015-0291

Reviewed-by: Tim Hudson <tjh@openssl.org>

Conflicts:
	ssl/t1_lib.c

Fix a bug where invalid PSS parameters are not rejected resulting in a
NULL pointer exception. This can be triggered during certificate
verification so could be a DoS attack against a client or a server
enabling client authentication.

Thanks to Brian Carpenter for reporting this issues.

CVE-2015-0208

Reviewed-by: Tim Hudson <tjh@openssl.org>

CVE-2015-0287

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

The DTLSv1_listen function is intended to be stateless and processes
the initial ClientHello from many peers. It is common for user code to
loop over the call to DTLSv1_listen until a valid ClientHello is received
with an associated cookie. A defect in the implementation of DTLSv1_listen
means that state is preserved in the SSL object from one invokation to the
next that can lead to a segmentation fault. Erorrs processing the initial
ClientHello can trigger this scenario. An example of such an error could
be that a DTLS1.0 only client is attempting to connect to a DTLS1.2 only
server.

CVE-2015-0207

Reviewed-by: Richard Levitte <levitte@openssl.org>

OpenSSL 1.0.2 introduced the "multiblock" performance improvement. This
feature only applies on 64 bit x86 architecture platforms that support AES
NI instructions. A defect in the implementation of "multiblock" can cause
OpenSSL's internal write buffer to become incorrectly set to NULL when
using non-blocking IO. Typically, when the user application is using a
socket BIO for writing, this will only result in a failed connection.
However if some other BIO is used then it is likely that a segmentation
fault will be triggered, thus enabling a potential DoS attack.

CVE-2015-0290

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>

Add support for ServerInfo SSL_CONF option and update documentation. This
was wrongly omitted from the 1.0.2 release.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Some miscellaneous removal of dead code from apps. Also fix an issue with
error handling with pkcs7.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 11abf922)

Some miscellaneous removal of dead code from lib crypto.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit b7573c59)

Passing a negative value for the "-time" option to s_time results in a seg
fault. This commit fixes it so that time has to be greater than 0.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit dfef52f6)

The function tls1_PRF counts the number of digests in use and partitions
security evenly between them. There always needs to be at least one digest
in use, otherwise this is an internal error. Add a sanity check for this.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 668f6f08)

The function sk_zero is supposed to zero the elements held within a stack.
It uses memset to do this. However it calculates the size of each element
as being sizeof(char **) instead of sizeof(char *). This probably doesn't
make much practical difference in most cases, but isn't a portable
assumption.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 7132ac83)

Move memory allocation failure checks closer to the site of the malloc in
dgst app. Only a problem if the debug flag is set...but still should be
fixed.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit be1477ad)

Add some missing checks for memory allocation failures in ca app.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit a561bfe9)

Previously, ASN1_UTCTIME_cmp_time_t would return 1 if s > t, -1 if
s < t, and 0 if s == t.

This behavior was broken in a refactor [0], resulting in the opposite
time comparison behavior.

[0]: 904348a4



PR#3706

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit da27006d)

Other curves don't have this problem.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 9fbbdd73)

Td4 and Te4 are arrays of u8. A u8 << int promotes the u8 to an int first then shifts.
If the mathematical result of a shift (as modelled by lhs * 2^{rhs}) is not representable
in an integer, behaviour is undefined. In other words, you can't shift into the sign bit
of a signed integer. Fix this by casting to u32 whenever we're shifting left by 24.

(For consistency, cast other shifts, too.)

Caught by -fsanitize=shift

Submitted by Nick Lewycky (Google)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 8b37e5c1)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 3d764db7)

When printing out an ASN.1 structure if the type is an item template don't
fall thru and attempt to interpret as a primitive type.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 5dc1247a)

If SSL_check_chain is called with a NULL X509 object or a NULL EVP_PKEY
or the type of the public key is unrecognised then the local variable
|cpk| in tls1_check_chain does not get initialised. Subsequently an
attempt is made to deref it (after the "end" label), and a seg fault will
result.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
(cherry picked from commit d813f9eb)

Fixed assorted missing return value checks in c3_cpols.c

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit c5f2b533)

The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0c7ca403)

The return value from ASN1_STRING_new() was not being checked which could
lead to a NULL deref in the event of a malloc failure. Also fixed a mem
leak in the error path.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 6aa8dab2)