Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 3da9505d)

Manually-cherry-picked since master varied a lot.
Reviewed-by: Tim Hudson <tjh@openssl.org>

Best hope of keeping current.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 4f46473a)

Clarify and update documention for extra chain certificates.

PR#3878.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2fd7fb99)

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 6d5f8265)

Reviewed-by: Matt Caswell <matt@openssl.org>

Part of RT 3997
Per Ben, just jump to common exit code.

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit cc2829e6)

PR#3974
PR#3975

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 891eac46)

Conflicts:
	crypto/cms/cms_enc.c

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit a187e08d)

Conflicts:
	crypto/cms/cms_smime.c

When config'd with "sctp" running "make test" causes a seg fault. This is
actually due to the way ssltest works - it dives under the covers and frees
up BIOs manually and so some BIOs are NULL when the SCTP code does not
expect it. The simplest fix is just to add some sanity checks to make sure
the BIOs aren't NULL before we use them.

This problem occurs in master and 1.0.2. The fix has also been applied to
1.0.1 to keep the code in sync.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit f75d5171)

There are some missing return value checks in the SCTP code. In master this
was causing a compilation failure when config'd with
"--strict-warnings sctp".

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit d8e8590e)

The function BN_MONT_CTX_set was assuming that the modulus was non-zero
and therefore that |mod->top| > 0. In an error situation that may not be
the case and could cause a seg fault.

This is a follow on from CVE-2015-1794.

Reviewed-by: Richard Levitte <levitte@openssl.org>

If a client receives a ServerKeyExchange for an anon DH ciphersuite with the
value of p set to 0 then a seg fault can occur. This commits adds a test to
reject p, g and pub key parameters that have a 0 value (in accordance with
RFC 5246)

The security vulnerability only affects master and 1.0.2, but the fix is
additionally applied to 1.0.1 for additional confidence.

CVE-2015-1794

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Ben Laurie <ben@openssl.org>
(cherry picked from commit 2bfbeb26)

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 11252459)

EC_KEY_set_public_key_affine_coordinates was using some variables that only
apply if OPENSSL_NO_EC2M is not defined.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit 8d11b7c7)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e36ce2d9)

From a CloudFlare patch.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Thanks, folks!
        348 Benjamin Kaduk
        317 Christian Brueffer
        254 Erik Tews
        253 Erik Tews
        219 Carl Mehner
        155 (ghost)
        95 mancha
        51 DominikNeubauer

(Manually picked from 59c554b36e39256ac2cfc34dca052453e10c6d9c)
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Manual cherry-pick from main branch, since the header file
moved in master.
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

The DTLS code is supposed to drop packets if we try to write them out but
the underlying BIO write buffers are full. ssl3_write_pending() contains
an incorrect test for DTLS that controls this. The test only checks for
DTLS1 so DTLS1.2 does not correctly clear the internal OpenSSL buffer which
can later cause an assert to be hit. This commit changes the test to cover
all DTLS versions.

RT#3967

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 5e8b24db)

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit fa4629b6)

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 932af161)

The function SSL_set_session_ticket_ext can be used to set custom session
ticket data passed in the initial ClientHello. This can be particularly
useful for EAP-FAST. However, when using SSLv23_method, the session does
not get created until the ServerHello has been received. The extension code
will only add the SessionTicket data to the ClientHello if a session already
exists. Therefore SSL_set_session_ticket_ext has no impact when used in
conjunction with SSLv23_method. The solution is to simply create the session
during creation of the ClientHello instead of waiting for the ServerHello.

This commit fixes the test failure introduced by the previous commit.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

The function SSL_set_session_ticket_ext sets the ticket data to be sent in
the ClientHello. This is useful for EAP-FAST. This commit adds a test to
ensure that when this function is called the expected ticket data actually
appears in the ClientHello.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f4ee22be)

Reviewed-by: Richard Levitte <levitte@openssl.org>

This reverts commit e5c0bc6c

.
Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(cherry picked from commit ad282e63)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e5c0bc6c)

This leaves behind files with names ending with '.iso-8859-1'.  These
should be safe to remove.  If something went wrong when re-encoding,
there will be some files with names ending with '.utf8' left behind.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This requires 'iconv' and that 'file' can take the options '-b' and '-i'.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f608b406)

Fixes GH#330

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit eeb97bce)

Conflicts:
	apps/Makefile

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit da24e6f8)

Instead of piping through tardy, and possibly suffering from bugs in certain
versions, use --transform, --owner and --group directly with GNU tar (we
already expect that tar variant).

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 27f98436)

Conflicts:
	Makefile.org

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2fc52c91)

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 99dcd880)

Reviewed-by: Rich Salz <rsalz@openssl.org>