Only set the load_crypto_strings_inited to 1 when err_load_crypto_strings_int was called.

This solves the following issue:
- openssl is built with no-err
- load_crypto_strings_inited is set to 1 during the OPENSSL_init_crypto call
- During the cleanup: OPENSSL_cleanup, err_free_strings_int is called because load_crypto_strings_inited == 1
- err_free_strings_int calls do_err_strings_init because it has never been called
- Now do_err_strings_init calls OPENSSL_init_crypto
- But since we are in the cleanup (stopped == 1) this results in an error:
  CRYPTOerr(CRYPTO_F_OPENSSL_INIT_CRYPTO, ERR_R_INIT_FAIL);
- which then tries to initialize everything we are trying to clean up: ERR_get_state, ossl_init_thread_start, etc
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1654)
(cherry picked from commit a1f2b0e6)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1632)
(cherry picked from commit 31dad404)

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit efba60ca)

Don't rely on embedded flag to free strings correctly: it wont be
set if there is a malloc failure during initialisation.

Thanks to Guido Vranken for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1725)
(cherry picked from commit 6215f27a)

CLA: trivial

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit ba6017a1)

These are implemented as macros delegating to `EVP_DigestUpdate`, which
takes a `size_t` as its third argument, not an `unsigned int`.

CLA: trivial

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 8bdce8d1)

If len == 0 in a call to ERR_error_string_n() then we can read beyond the
end of the buffer. Really applications should not be calling this function
with len == 0, but we shouldn't be letting it through either!

Thanks to Agostino Sarubbo for reporting this issue. Agostino's blog on
this issue is available here:
https://blogs.gentoo.org/ago/2016/10/14/openssl-libcrypto-stack-based-buffer-overflow-in-err_error_string_n-err-c/



Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit e5c13615)

Copy the whole ALG_OP_TYPE to CMSG_DATA.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 574cffd5)

I think the second "VC-WIN32" should be "VC-WIN64".
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
CLA: trivial

The number is taken from the OPENSSL_VERSION_NUMBER which is already
in the hex form.

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1706)

(cherry picked from commit 35a498e4)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1707)
(cherry picked from commit 4a4c4bf0)

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 32804b04)

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 38be1ea8)

Looking for something starting with '-Wl,-rpath,' isn't good enough,
as someone might give something like '-Wl,--enable-new-dtags,-rpath,/PATH'.
Looking for ',-rpath,' should be safe enough.

We could remove the preloading stuff entirely, but just in case the
user has chosen to given RPATH setting arguments at configuration,
we'd better make sure testing will still work.  Fair warning, there
are some configuration options that do not work with preloaded OpenSSL
libraries, such as the sanity checking ones.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 71d8ff1a)

Make Configure recognise -rpath and -R to support user added rpaths
for OSF1 and Solaris.  For convenience, add a variable LIBRPATH in the
Unix Makefile, which the users can use as follows:

    ./config [options] -Wl,-rpath,\$(LIBRPATH)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit fad599f7)

Before OpenSSL 1.1.0, binaries were installed in a non-standard
location by default, and runpath directories were therefore added in
those binaries, to make sure the executables would be able to find the
shared libraries they were linked with.

With OpenSSL 1.1.0 and on, binaries are installed in standard
directories by default, and the addition of runpath directories is
therefore not needed any more.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 075f7e2c)

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1702)
(cherry picked from commit 7954dced)

The original X509_NAME decode free code was buggy: this
could result in double free or leaks if a malloc failure
occurred.

Simplify and fix the logic.

Thanks to Guido Vranken for reporting this issue.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1691)
(cherry picked from commit 6dcba070)

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit eb67172a)

Tidy up srp_Calc_k and SRP_Calc_u by making them a special case of
srp_Calc_xy which performs SHA1(PAD(x) | PAD(y)).

This addresses an OCAP Audit issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 8f332ac9)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 198d8059)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 83ae4661)

This used to work in 1.0.2 but disappeared when the argument parsing was
revamped.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1639)

(cherry picked from commit a6972f34)

If we have a handshake fragment waiting then dtls1_read_bytes() was not
correctly setting the value of recvd_type, leading to an uninit read.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 2f2d6e3e)

The new large message test in sslapitest needs OPENSSL_NO_DTLS guards

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 55386bef)

Before loading a key from an engine, it may need to be initialized.
When done loading the key, we must de-initialize the engine.
(if the engine is already initialized somehow, only the reference
counter will be incremented then decremented)

Reviewed-by: Stephen Henson <steve@openssl.org>
(cherry picked from commit 49e476a5)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit f9b1b664)

Add the ability to test both server initiated and client initiated reneg.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit fe7dd553)

Add update for testing renegotiation. Also change info on CTLOG_FILE
environment variable - which always seems to be required.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 1329b952)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit e42c4544)

This would have caught 099e2968. This is
a port of the test added in
https://boringssl.googlesource.com/boringssl/+/7c040756178e14a4d181b6d93abb3827c93189c4



Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1496)
(cherry picked from commit 8ff70f33)

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 243ecf19)

The TLSProxy::Record->new call hard-codes a version, like
70-test_sslrecords.t.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit f3ea8d77)

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 3058b742)

Avoid making the CI blow up.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 5cf6d7c5)