- 07 Mar, 2019 8 commits
-
-
Bernd Edlinger authored
Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/8365) (cherry picked from commit f0e4a860)
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
of RSA_private_decrypt/RSA_public_encrypt. Reviewed-by:
-
Bernd Edlinger authored
Fixes #8364 and #8357 Reviewed-by:
-
Bernd Edlinger authored
Fixes #8416 Reviewed-by:
-
Matt Caswell authored
The previous commit fixed an underflow that may occur in ecp_nistp521.c. This commit adds a test for that condition. It is heavily based on an original test harness by Billy Brumley. Reviewed-by:
Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/8405) (cherry picked from commit 6855b496)
-
Matt Caswell authored
The function felem_diff_128_64 in ecp_nistp521.c substracts the number |in| from |out| mod p. In order to avoid underflow it first adds 32p mod p (which is equivalent to 0 mod p) to |out|. The comments and variable naming suggest that the original author intended to add 64p mod p. In fact it has been shown that with certain unusual co-ordinates it is possible to cause an underflow in this function when only adding 32p mod p while performing a point double operation. By changing this to 64p mod p the underflow is avoided. It turns out to be quite difficult to construct points that satisfy the underflow criteria although this has been done and the underflow demonstrated. However none of these points are actually on the curve. Finding points that satisfy the underflow criteria and are also *on* the curve is considered significantly more difficult. For this reason we do not believe that this issue is currently practically exploitable and therefore no CVE has been assigned. This only impacts builds using the enable-ec_nistp_64_gcc_128 Configure option. With thanks to Bo-Yin Yang, Billy Brumley and Dr Liu for their significant help in investigating this issue. Reviewed-by:
-
- 06 Mar, 2019 3 commits
-
-
Matt Caswell authored
Correctly describe the maximum IV length. Reviewed-by:
Paul Dale <paul.dale@oracle.com> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8406) (cherry picked from commit 27d56312)
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
ChaCha20-Poly1305 is an AEAD cipher, and requires a unique nonce input for every encryption operation. RFC 7539 specifies that the nonce value (IV) should be 96 bits (12 bytes). OpenSSL allows a variable nonce length and front pads the nonce with 0 bytes if it is less than 12 bytes. However it also incorrectly allows a nonce to be set of up to 16 bytes. In this case only the last 12 bytes are significant and any additional leading bytes are ignored. It is a requirement of using this cipher that nonce values are unique. Messages encrypted using a reused nonce value are susceptible to serious confidentiality and integrity attacks. If an application changes the default nonce length to be longer than 12 bytes and then makes a change to the leading bytes of the nonce expecting the new value to be a new unique nonce then such an application could inadvertently encrypt messages with a reused nonce. Additionally the ignored bytes in a long nonce are not covered by the integrity guarantee of this cipher. Any application that relies on the integrity of these ignored leading bytes of a long nonce may be further affected. Any OpenSSL internal use of this cipher, including in SSL/TLS, is safe because no such use sets such a long nonce value. However user applications that use this cipher directly and set a non-default nonce length to be longer than 12 bytes may be vulnerable. CVE-2019-1543 Fixes #8345 Reviewed-by:
-
- 05 Mar, 2019 1 commit
-
-
Matt Caswell authored
Sessions must be immutable once they can be shared with multiple threads. We were breaking that rule by writing the ticket index into it during the handshake. This can lead to incorrect behaviour, including failed connections in multi-threaded environments. Reported by David Benjamin. Reviewed-by:
-
- 04 Mar, 2019 1 commit
-
-
Vitezslav Cizek authored
GNU strerror_r may return either a pointer to a string that the function stores in buf, or a pointer to some (immutable) static string in which case buf is unused. In such a case we need to set buf manually. Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8371) (cherry picked from commit e3b35d2b)
-
- 01 Mar, 2019 2 commits
-
-
Bernd Edlinger authored
Use select to wait for /dev/random in readable state, but do not actually read anything from /dev/random, use /dev/urandom first. Use linux define __NR_getrandom instead of the glibc define SYS_getrandom, in case the kernel headers are more current than the glibc headers. Fixes #8215 Reviewed-by:
-
Shigeki Ohtsu authored
Generate asm files with Makefile rules. From: - https://github.com/nodejs/node/commit/0d9a86c7cb3566b22becc656691282402f5026c0 Reviewed-by:
-
- 28 Feb, 2019 5 commits
-
-
Richard Levitte authored
CFLAGS, CXXFLAGS, CPPFLAGS, LDFLAGS, and LDLIBS (cherry picked from commit 8e7984e5 ) Reviewed-by:
-
Richard Levitte authored
For C, -ansi is equivalent to -std=c90 For C++, -ansi is equivalent to -std=c++98 We also place -ansi in CPPFLAGS instead of the usual command line config, to avoid getting it when linking (clang complains) (cherry picked from commit 874f7859 ) Reviewed-by:
-
Richard Levitte authored
Some of the devteam flags are not for C++ (cherry picked from commit e373c70a ) Reviewed-by:
-
Richard Levitte authored
This ensures that we don't mistakenly use C++ keywords anywhere public. Related to #8313 (cherry picked from commit 9f27d4bf ) Reviewed-by:
-
Richard Levitte authored
This makes `--strict-warnings` into a compiler pseudo-option, i.e. it gets treated the same way as any other compiler option given on the configuration command line, but is retroactively replaced by actual compiler warning options, depending on what compiler is used. This makes it easier to see in what order options are given to the compiler from the configuration command line, i.e. this: ./config -Wall --strict-warnings would give the compiler flags in the same order as they're given, i.e.: -Wall -Werror -Wno-whatever ... instead of what we got previously: -Werror -Wno-whatever ... -Wall (cherry picked from commit fcee5394 ) Reviewed-by:
-
- 27 Feb, 2019 5 commits
-
-
Shane Lontis authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Since the padlock code is an engine, the assembler is for a module, not a library link to when building a program... there's a distinction. Fixes #2311 Reviewed-by:
-
Paul Yang authored
Currently SM2 shares the ameth with EC, so the current default digest algorithm returned is SHA256. This fixes the default digest algorithm of SM2 to SM3, which is the only valid digest algorithm for SM2 signature. Reviewed-by:
-
- 26 Feb, 2019 12 commits
-
-
Richard Levitte authored
Github PR #8246 provides a better solution to the problem. This reverts commit f11ffa505f8a9345145a26a05bf77b012b6941bd. [extended tests] Reviewed-by:
-
Billy Brumley authored
(cherry picked from commit 1a31d8017ee7e8df0eca76fee601b826699c9ac1) Reviewed-by:
-
Nicola Tuveri authored
(cherry picked from commit b3883f77df33989b0d4298ca9a21d8595dd9a8c9) Reviewed-by:
Paul Yang <yang.yang@baishancloud.com> Reviewed-by:
-
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Reviewed-by: -
Matt Caswell authored
Follow on from CVE-2019-1559 Reviewed-by: -
Matt Caswell authored
Reviewed-by:
-
Eneas U de Queiroz authored
This restores the behavior of previous versions of the /dev/crypto engine, in alignment with the default implementation. Reported-by:
Gerard Looije <lglooije@hotmail.com> Signed-off-by:
Eneas U de Queiroz <cote2004-github@yahoo.com> Reviewed-by:
-
Eneas U de Queiroz authored
cipher_init may be called on an already initialized context, without a necessary cleanup. This separates cleanup from initialization, closing an eventual open session before creating a new one. Move the /dev/crypto session cleanup code to its own function. Signed-off-by:
-
Matt Caswell authored
Reviewed-by:
-
Richard Levitte authored
There is too high a risk that perl and OpenSSL are linked with different C RTLs, and thereby get different messages for even the most mundane error numbers. Reviewed-by:
-
Richard Levitte authored
test/shlibloadtest.c needs added code for VMS shared libraries Reviewed-by:
-
- 25 Feb, 2019 2 commits
-
-
Richard Levitte authored
The real cause for this change is that test/ec_internal_test.c includes ec_lcl.h, and including curve448/curve448_lcl.h from there doesn't work so well with compilers who always do inclusions relative to the C file being compiled. Reviewed-by:
-
Matt Caswell authored
Thanks to David Benjamin who reported this, performed the analysis and suggested the patch. I have incorporated some of his analysis in the comments below. This issue can cause an out-of-bounds read. It is believed that this was not reachable until the recent "fixed top" changes. Analysis has so far only identified one code path that can encounter this - although it is possible that others may be found. The one code path only impacts 1.0.2 in certain builds. The fuzzer found a path in RSA where iqmp is too large. If the input is all zeros, the RSA CRT logic will multiply a padded zero by iqmp. Two mitigating factors: - Private keys which trip this are invalid (iqmp is not reduced mod p). Only systems which take untrusted private keys care. - In OpenSSL 1.1.x, there is a check which rejects the oversize iqmp, so the bug is only reproducible in 1.0.2 so far. Fortunately, the bug appears to be relatively harmless. The consequences of bn_cmp_word's misbehavior are: - OpenSSL may crash if the buffers are page-aligned and the previous page is non-existent. - OpenSSL will incorrectly treat two BN_ULONG buffers as not equal when they are equal. - Side channel concerns. The first is indeed a concern and is a DoS bug. The second is fine in this context. bn_cmp_word and bn_cmp_part_words are used to compute abs(a0 - a1) in Karatsuba. If a0 = a1, it does not matter whether we use a0 - a1 or a1 - a0. The third would be worth thinking about, but it is overshadowed by the entire Karatsuba implementation not being constant time. Due to the difficulty of tripping this and the low impact no CVE is felt necessary for this issue. Reviewed-by:
Viktor Dukhovni <viktor@openssl.org> (Merged from https://github.com/openssl/openssl/pull/8326) (cherry picked from commit 576129cd)
-
- 22 Feb, 2019 1 commit
-
-
Richard Levitte authored
Ty Baen-Price explains: > Problem and Resolution: > The following lines of code make use of the Microsoft API ExitProcess: > > ``` > Apps\Speed.c line 335: ExitProcess(ret); > Ms\uplink.c line 22: ExitProcess(1); > ``` > > These function calls are made after fatal errors are detected and > program termination is desired. ExitProcess(), however causes > _orderly_ shutdown of a process and all its threads, i.e. it unloads > all dlls and runs all destructors. See MSDN for details of exactly > what happens > (https://msdn.microsoft.com/en-us/library/windows/desktop/ms682658(v=vs.85).aspx). > The MSDN page states that ExitProcess should never be called unless > it is _known to be safe_ to call it. These calls should simply be > replaced with calls to TerminateProcess(), which is what should be > called for _disorderly_ shutdown. > > An example of usage: > > ``` > TerminateProcess(GetCurrentProcess(), exitcode); > ``` > > Effect of Problem: > Because of a compila...
-
