Newer
Older
instance as part of the scaling operation. If
needed, the VNF Profile to be used for this VNF
instance may also be provided.
type: array
moscatelli
committed
items:
$ref: "#/definitions/VnfInstanceData"
vnfInstanceToBeRemoved:
description: >
The VNF instance to be removed from the NS
instance as part of the scaling operation.
type: array
moscatelli
committed
items:
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
scaleNsByStepsData:
description: >
The information used to scale an NS instance by
one or more scaling steps.
moscatelli
committed
$ref: "#/definitions/ScaleNsByStepsData"
scaleNsToLevelData:
description: >
The information used to scale an NS instance to a target size.
moscatelli
committed
$ref: "#/definitions/ScaleNsToLevelData"
additionalParamsForNs:
description: >
Allows the OSS/BSS to provide additional
parameter(s) at the NS level necessary for the
NS scaling (as opposed to the VNF level, which is
covered in additionalParamsForVnf).
moscatelli
committed
$ref: "#/definitions/ParamsForVnf"
additionalParamsForVnf:
description: >
Allows the OSS/BSS to provide additional
parameter(s) per VNF instance (as opposed to
the NS level, which is covered in
additionalParamsforNs). This is for VNFs that are
to be created by the NFVO as part of the NS
scaling and not for existing VNF that are covered
by the scaleVnfData.
type: array
moscatelli
committed
items:
$ref: "#/definitions/ParamsForVnf"
locationConstraints:
description: >
The location constraints for the VNF to be
instantiated as part of the NS scaling.
An example can be a constraint for the VNF to be
in a specific geographic location.
type: array
moscatelli
committed
items:
$ref: "#/definitions/VnfLocationConstraint"
nestedNslocationConstraints:
description: >
Defines the location constraints for the nested NS to be instantiated as part of the NS instantiation.
An example can be a constraint for the nested NS to be in a specific geographic location.
type: array
items:
$ref: "#/definitions/NestedNsLocationConstraint"
ScaleVnfData:
description: >
This type represents defines the information to scale a VNF instance
to a given level, or to scale a VNF instance by steps.
type: object
required:
- vnfInstanceid
moscatelli
committed
- scaleVnfType
oneOf:
- required:
- scaleToLevelData
- required:
- scaleByStepData
description: >
Identifier of the VNF instance being scaled.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
scaleVnfType:
description: >
Type of the scale VNF operation requested.
Allowed values are:
- SCALE_OUT
- SCALE_IN
- SCALE_TO_INSTANTIATION_LEVEL
- SCALE_TO_SCALE_LEVEL(S)
The set of types actually supported depends on the
capabilities of the VNF being managed.
type: string
moscatelli
committed
enum:
moscatelli
committed
- SCALE_IN
- SCALE_TO_INSTANTIATION_LEVEL
- SCALE_TO_SCALE_LEVEL(S)
scaleToLevelData:
description: >
The information used for scaling to a given level.
moscatelli
committed
$ref: "#/definitions/ScaleToLevelData"
scaleByStepData:
description: >
The information used for scaling by steps.
moscatelli
committed
$ref: "#/definitions/ScaleByStepData"
4102
4103
4104
4105
4106
4107
4108
4109
4110
4111
4112
4113
4114
4115
4116
4117
4118
4119
4120
4121
4122
4123
4124
4125
ScaleNsByStepsData:
description: >
This type represents the information used to scale an NS instance by one or more scaling steps, with respect to a
particular NS scaling aspect. Performing a scaling step means increasing/decreasing the capacity of an NS instance in a
discrete manner, i.e. moving from one NS scale level to another. The NS scaling aspects and their corresponding NS
scale levels applicable to the NS instance are declared in the NSD.
type: object
required:
- scalingDirection
- aspectId
properties:
scalingDirection:
description: >
The scaling direction. Possible values are:
- SCALE_IN
- SCALE_OUT.
type: string
enum:
- SCALE_IN
- SCALE_OUT
aspectId:
description: >
The aspect of the NS that is requested to be scaled, as
declared in the NSD.
$ref: "#/definitions/IdentifierInNsd"
numberOfSteps:
description: >
The number of scaling steps to be performed. Defaults to 1.
type: integer
default: 1
ScaleNsToLevelData:
description: >
This type represents the information used to scale an NS instance to a target size. The target size is either expressed as
an NS instantiation level or as a list of NS scale levels, one per NS scaling aspect, of the current DF. The NS
instantiation levels, the NS scaling aspects and their corresponding NS scale levels applicable to the NS instance are
declared in the NSD.
type: object
oneOf:
- required:
- nsInstantiationLevel
- required:
- nsScaleInfo
properties:
nsInstantiationLevel:
description: >
Identifier of the target NS instantiation level of the
current DF to which the NS instance is requested to be scaled.
$ref: "#/definitions/IdentifierInNsd"
nsScaleInfo:
description: >
For each NS scaling aspect of the current DF, defines
the target NS scale level to which the NS instance is to be scaled.
type: array
moscatelli
committed
items:
$ref: "#/definitions/NsScaleInfo"
moscatelli
committed
ScaleToLevelData:
description: >
This type describes the information used to scale a VNF instance to a target size. The target size is either expressed as
an instantiation level of that DF as defined in the VNFD, or given as a list of scale levels, one per scaling aspect of that
DF. Instantiation levels and scaling aspects are declared in the VNFD. The NFVO shall then invoke the
ScaleVnfToLevel operation towards the appropriate VNFM..
type: object
anyOf:
- required:
- vnfInstantiationLevelId
- required:
- vnfScaleInfo
properties:
vnfInstantiationLevelId:
description: >
Identifier of the target instantiation level of the current
deployment flavor to which the VNF is requested to be scaled.
$ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
vnfScaleInfo:
description: >
For each scaling aspect of the current deployment
flavor, indicates the target scale level to which the VNF
is to be scaled.
type: array
moscatelli
committed
items:
$ref: "#/definitions/VnfScaleInfo"
additionalParams:
description: >
Additional parameters passed by the NFVO as input to
the scaling process, specific to the VNF being scaled.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
ScaleByStepData:
description: >
This type describes the information to scale a VNF instance by steps.
The NFVO shall then invoke the Scale VNF
operation towards the appropriate VNFM.
type: object
required:
- aspectId
properties:
aspectId:
description: >
Identifier of (reference to) the aspect of the VNF that is
requested to be scaled, as declared in the VNFD.
$ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
numberOfSteps:
description: >
Number of scaling steps. It shall be a positive number.
Defaults to 1.
The VNF provider defines in the VNFD whether or not a
particular VNF supports performing more than one step
at a time. Such a property in the VNFD applies for all
instances of a particular VNF.
type: integer
moscatelli
committed
default: 1
additionalParams:
description: >
Additional parameters passed by the NFVO as input to
the scaling process, specific to the VNF instance being scaled.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/KeyValuePairs"
moscatelli
committed
LcmOperationStateType:
description: >
Value | Description
------|------------
PROCESSING | The LCM operation is currently in execution.
COMPLETED | The LCM operation has been completed successfully.
PARTIALLY_COMPLETED | The LCM operation has been partially completed with accepTable errors.
FAILED_TEMP | The LCM operation has failed and execution has stopped, but the execution of the operation is not considered to be closed.
FAILED | The LCM operation has failed and it cannot be retried or rolled back, as it is determined that such action will not succeed.
OLLING_BACK | The LCM operation is currently being rolled back.
ROLLED_BACK | The LCM operation has been successfully rolled back, i.e. The state of the NS prior to the original operation invocation has been restored as closely as possible.
type: string
enum:
- PROCESSING
- COMPLETED
- PARTIALLY_COMPLETED
- FAILED_TEMP
- FAILED
- ROLLING_BACK
- ROLLED_BACK
moscatelli
committed
NsComponentType:
description: >
The enumeration NsComponentType represents the NS component type. It shall comply with the provisions defined in Table 6.5.4.5-1.
Value | Description
------|------------
VNF | Represents the impacted NS component is a VNF.
PNF | Represents the impacted NS component is a PNF.
NS | Represents the impacted NS component is a nested NS.
type: string
enum:
- VNF
- PNF
moscatelli
committed
- NS
Samir Medjiah
committed
4256
4257
4258
4259
4260
4261
4262
4263
4264
4265
4266
4267
4268
4269
4270
4271
4272
4273
4274
4275
4276
4277
4278
LcmOpNameForChangeNotificationType:
description: >
The enumeration LcmOpNameForChangeNotificationType represents the name of the lifecycle operation that impacts the NS component and trigger an NS change notification. It shall comply with the provisions defined in Table 6.5.4.6-1.
Value | Description
------|------------
VNF_INSTANTIATE | Represents the "Instantiate VNF" LCM operation.
VNF_SCALE | Represents the "Scale VNF" LCM operation.
VNF_SCALE_TO_LEVEL | Represents the "Scale VNF to Level" LCM operation.
VNF_CHANGE_FLAVOUR | Represents the "Change VNF Flavor" LCM operation.
VNF_TERMINATE | Represents the "Terminate VNF" LCM operation.
VNF_HEAL | Represents the "Heal VNF" LCM operation.
VNF_OPERATE | Represents the "Operate VNF" LCM operation.
VNF_CHANGE_EXT_CONN | Represents the "Change external VNF connectivity" LCM operation.
VNF_MODIFY_INFO | Represents the "Modify VNF Information" LCM operation.
NS_INSTANTIATE | Represents the "Instantiate NS" LCM operation
NS_SCALE | Represents the "Scale NS" LCM operation.
NS_UPDATE | Represents the "Update NS" LCM operation.
NS_TERMINATE | Represents the "Terminate NS" LCM operation.
NS_HEAL | Represents the "Heal NS" LCM operation.
type: string
enum:
- VNF_INSTANTIATE
- VNF_SCALE
moscatelli
committed
- VNF_SCALE_TO_LEVEL
- VNF_CHANGE_FLAVOUR
- VNF_TERMINATE
- VNF_HEAL
- VNF_OPERATE
- VNF_CHANGE_EXT_CONN
- VNF_MODIFY_INFO
- NS_INSTANTIATE
- NS_SCALE
moscatelli
committed
- NS_UPDATE
- NS_TERMINATE
- NS_HEAL
Samir Medjiah
committed
LcmOpOccStatusForChangeNotificationType:
description: >
The enumeration LcmOpOccStatusForChangeNotificationType represents the status of the lifecycle management
operation occurrence that impacts the NS component and triggers an NS change notification. It shall comply with the
provisions defined in Table 6.5.4.7-1.
Value | Description
------|------------
START | The impact on the NS component is identified.
COMPLETED | The impact on the NS component stops and related lifecycle operation completes successfully.
PARTIALLY_COMPLETED | The impact on the NS component stops and related lifecycle operation partially completes. Inconsistency state may exist on the NS component.
FAILED | The impact on the NS component stops and related lifecycle operation fails. Inconsistency state may exist for the NS component.
ROLLED_BACK | The impact on the NS component stops and related lifecycle operation is rolled back.
type: string
enum:
- START
- COMPLETED
moscatelli
committed
- PARTIALLY_COMPLETED
- ROLLED_BACK
NsLcmOpOcc:
description: >
This type represents a request a NS lifecycle operation occurrence.
It shall comply with the provisions defined in Table 6.5.2.3-1.
type: object
required:
- id
- operationState
- nsInstanceId
- lcmOperationType
- startTime
- isAutomaticInvocation
- isCancelPending
- _links
properties:
id:
description: >
Identifier of this NS lifecycle operation occurrence.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
operationState:
description: >
The state of the NS LCM operation.
Samir Medjiah
committed
$ref: "#/definitions/NsLcmOperationStateType"
Date-time when the current state has been entered.
$ref: "../../definitions/SOL005_def.yaml#/definitions/DateTime"
nsInstanceId:
description: >
Identifier of the NS instance to which the operation applies.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
lcmOperationType:
description: >
Type of the actual LCM operation represented by this
lcm operation occurrence.
Samir Medjiah
committed
$ref: "#/definitions/NsLcmOpType"
startTime:
description: >
Date-time of the start of the operation.
$ref: "../../definitions/SOL005_def.yaml#/definitions/DateTime"
4353
4354
4355
4356
4357
4358
4359
4360
4361
4362
4363
4364
4365
4366
4367
4368
4369
4370
4371
4372
4373
4374
4375
4376
4377
4378
4379
4380
4381
4382
4383
4384
4385
4386
4387
4388
4389
4390
4391
4392
4393
4394
4395
4396
4397
4398
4399
4400
4401
4402
4403
isAutomaticInvocation:
description: >
Set to true if this NS LCM operation occurrence has
been automatically triggered by the NFVO. This occurs
in the case of auto-scaling, auto-healing and when a
nested NS is modified as a result of an operation on its
composite NS. Set to false otherwise.
type: boolean
operationParams:
description: >
Input parameters of the LCM operation. This attribute
shall be formatted according to the request data type of
the related LCM operation.
The following mapping between lcmOperationType and
the data type of this attribute shall apply:
- INSTANTIATE: InstantiateNsRequest
- SCALE: ScaleNsRequest
- UPDATE: UpdateNsRequest
- HEAL: HealNsRequest
- TERMINATE: TerminateNsRequest
This attribute shall be present if this data type is returned
in a response to reading an individual resource, and may
be present according to the chosen attribute selector
parameter if this data type is returned in a response to a
query of a container resource.
type: string
enum:
- INSTANTIATE
- SCALE
- UPDATE
- HEAL
- TERMINATE
isCancelPending:
description: >
If the LCM operation occurrence is in "PROCESSING"
or "ROLLING_BACK" state and the operation is being
cancelled, this attribute shall be set to true. Otherwise, it
shall be set to false.
type: boolean
cancelMode:
description: >
The mode of an ongoing cancellation. Shall be present
when isCancelPending=true, and shall be absent otherwise.
$ref: "#/definitions/CancelModeType"
error:
description: >
If "operationState" is "FAILED_TEMP" or "FAILED" or "operationState"
is "PROCESSING" or "ROLLING_BACK" and previous value of
"operationState" was "FAILED_TEMP", this attribute shall be present
and contain error information, unless it has been requested to be
excluded via an attribute selector.
$ref: "../../definitions/SOL005_def.yaml#/definitions/ProblemDetails"
resourceChanges:
description: >
This attribute contains information about the cumulative
changes to virtualised resources that were performed so
far by the LCM operation since its start, if applicable
type: object
properties:
affectedVnfs:
description: >
Information about the VNF instances that were affected
during the lifecycle operation, if this notification
represents the result of a lifecycle operation.
type: array
items:
Samir Medjiah
committed
$ref: "#/definitions/AffectedVnf"
affectedPnfs:
description: >
Information about the PNF instances that were affected
during the lifecycle operation, if this notification
represents the result of a lifecycle operation.
type: array
items:
Samir Medjiah
committed
$ref: "#/definitions/AffectedPnf"
affectedVls:
description: >
Information about the VL instances that were affected
during the lifecycle operation, if this notification
represents the result of a lifecycle operation.
type: array
items:
$ref: "#/definitions/AffectedVirtualLink"
affectedVnffgs:
description: >
Information about the VNFFG instances that were
affected during the lifecycle operation, if this notification
represents the result of a lifecycle operation. See note
type: array
items:
Samir Medjiah
committed
$ref: "#/definitions/AffectedVnffg"
affectedNss:
description: >
Information about the nested NS instances that were
affected during the lifecycle operation, if this notification
represents the result of a lifecycle operation. See note.
type: array
items:
Samir Medjiah
committed
$ref: "#/definitions/AffectedNs"
affectedSaps:
description: >
Information about the nested NS instances that were
affected during the lifecycle operation, if this notification
represents the result of a lifecycle operation. See note.
type: array
items:
Samir Medjiah
committed
$ref: "#/definitions/AffectedSap"
_links:
description: >
Links to resources related to this resource.
type: object
required:
- self
- nsInstance
properties:
self:
description: >
URI of this resource.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
nsInstance:
description: >
Link to the NS instance that the operation applies to.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
cancel:
description: >
Link to the task resource that represents the "cancel"
operation for this LCM operation occurrence, if
cancelling is currently allowed.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
retry:
description: >
Link to the task resource that represents the "cancel"
operation for this LCM operation occurrence,
if cancelling is currently allowed.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
rollback:
description: >
Link to the task resource that represents the "rollback"
operation for this LCM operation occurrence, if rolling
back is currently allowed.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
continue:
description: >
Link to the task resource that represents the "continue"
operation for this LCM operation occurrence, if rolling
back is currently allowed.
Samir Medjiah
committed
$ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
fail:
description: >
Link to the task resource that represents the "fail"
operation for this LCM operation occurrence, if rolling
back is currently allowed.
Samir Medjiah
committed
4505
4506
4507
4508
4509
4510
4511
4512
4513
4514
4515
4516
4517
4518
4519
4520
4521
4522
4523
4524
4525
4526
4527
4528
4529
4530
4531
4532
4533
4534
4535
4536
4537
4538
4539
4540
4541
4542
$ref: "../../definitions/SOL005_def.yaml#/definitions/Link"
subscriptionId:
description: >
Identifier of the subscription that this notification relates to.
type: string
nsInstanceId:
description: >
The deleted NS instance identifier.
type: string
CpProtocolData:
description: >
This type represents network protocol data.
type: object
required:
- layerProtocol
properties:
layerProtocol:
description: >
Identifier of layer(s) and protocol(s).
Permitted values: IP_OVER_ETHERNET.
type: string
enum:
- IP_OVER_ETHERNET
ipOverEthernet:
description: >
Network address data for IP over Ethernet to
assign to the extCP instance. Shall be
present if layerProtocol is equal to
"IP_OVER_ETHERNET", and shall be absent otherwise.
$ref: "#/definitions/IpOverEthernetAddressData"
IpOverEthernetAddressData:
description: >
This type represents network address data for IP over Ethernet.
type: object
anyOf:
- required:
- ipAddresses
- required:
- macAddress
Samir Medjiah
committed
properties:
macAddress:
description: >
MAC address. If this attribute is not present, it shall be chosen by the NFV MANO.
$ref: "#/definitions/MacAddress"
segmentationType:
description: >
Specifies the encapsulation type for the traffics coming in and out of the trunk subport.
Permitted values are:
- VLAN: The subport uses VLAN as encapsulation type.
- INHERIT: The subport gets its segmentation type from the network it is connected to.
This attribute may be present for CP instances that represent subports in a trunk and shall be absent otherwise.
If this attribute is not present for a subport CP instance, default value VLAN shall be used.
type: string
enum:
- VLAN
- INHERIT
segmentationId:
description: >
Identification of the network segment to which the CP instance connects to.
If the CP instance represents a subport in a trunk, "segmentationId" shall be present.
Otherwise it shall not be present.
Depending on the NFVI networking infrastructure, the "segmentationId" may indicate the actual network segment
value (e.g. vlan Id, Vxlan segmentation id, etc.) used in the transport header of the packets or it may be an
identifier used between the application and the NFVI networking infrastructure to identify the network sub-interface
of the trunk port in question. In the latter case the NFVI infrastructure will map this local "segmentationId"
to whatever "segmentationId" is actually used by the NFVI’s transport technology.
type: string
Samir Medjiah
committed
ipAddresses:
description: >
List of IP addresses to assign to the CP instance. Each entry
represents IP address data for fixed or dynamic IP address
assignment per subnet.
If this attribute is not present, no IP address shall be assigned.
type: array
items:
type: object
required:
- type
oneOf:
- required:
- fixedAddresses
- required:
- numDynamicAddresses
- required:
- addressRange
Samir Medjiah
committed
properties:
type:
description: >
The type of the IP addresses.
Permitted values:
- IPV4
- IPV6
Samir Medjiah
committed
type: string
enum:
- IPV4
- IPV6
fixedAddresses:
description: >
Fixed addresses to assign (from the subnet defined by
"subnetId" if provided).
Exactly one of "fixedAddresses", "numDynamicAddresses" or
"ipAddressRange" shall be present.
type: array
items:
$ref: "#/definitions/IpAddress"
Samir Medjiah
committed
4614
4615
4616
4617
4618
4619
4620
4621
4622
4623
4624
4625
4626
4627
4628
4629
4630
4631
4632
4633
4634
numDynamicAddresses:
description: >
Number of dynamic addresses to assign (from the subnet defined
by "subnetId" if provided).
Exactly one of "fixedAddresses", "numDynamicAddresses" or
"ipAddressRange" shall be present.
type: integer
addressRange:
description: >
An IP address range to be used, e.g. in case of egress
connections.
In case this attribute is present, IP addresses from the range
will be used.
type: object
required:
- minAddress
- maxAddress
properties:
minAddress:
description: >
Lowest IP address belonging to the range.
$ref: "#/definitions/IpAddress"
Samir Medjiah
committed
maxAddress:
description: >
Highest IP address belonging to the range.
$ref: "#/definitions/IpAddress"
Samir Medjiah
committed
subnetId:
description: >
Subnet defined by the identifier of the subnet resource in the
VIM.
In case this attribute is present, IP addresses from that
subnet will be assigned; otherwise, IP addresses not bound to
a subnet will be assigned.
$ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVim"
Samir Medjiah
committed
4648
4649
4650
4651
4652
4653
4654
4655
4656
4657
4658
4659
4660
4661
4662
4663
4664
4665
4666
4667
4668
4669
4670
4671
4672
4673
4674
4675
4676
4677
4678
4679
ExtVirtualLinkData:
description: >
This type represents an external VL. It shall comply with the provisions defined in Table 6.5.3.26-1.
type: object
required:
- resourceId
- extCps
properties:
extVirtualLinkId:
description: >
The identifier of the external VL instance, if provided.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
vimId:
description: >
Identifier of the VIM that manages this resource. This
attribute shall only be supported and present if VNFrelated
resource management in direct mode is applicable.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
resourceProviderId:
description: >
Identifies the entity responsible for the management of
this resource.
This attribute shall only be supported and present if
VNF-related resource management in indirect mode is
applicable. The identification scheme is outside the
scope of the present document.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
resourceId:
description: >
The identifier of the resource in the scope of the VIM or
the resource provider.
$ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVim"
Samir Medjiah
committed
extCps:
description: >
External CPs of the VNF to be connected to this external VL.
type: array
items:
$ref: "#/definitions/VnfExtCpData"
extLinkPorts:
description: >
Externally provided link ports to be used to connect
external connection points to this external VL unless
the extCp exposes a VIP CP and a link port is not needed
for it based on the conditions defined below.
A link port is not needed for an external CP instance that exposes a VIP CP in the following cases:
1. For a VIP CP directly exposed as extCP:
1.1. no dedicated IP address is allocated as VIP address, as indicated in the VNFD
1.2. a dedicated IP address is allocated as VIP address, but the NFVO indicates that no port is needed
(createExtLinkPort in VnfExtCpConfig set to false).
2. For a VIP CP exposed as extCP via a floating IP address:
2.1. no dedicated IP address is allocated as VIP address, as indicated in the VNFD,
and the VNFC CP associated to the VIP CP is also exposed via a floating IP address.
Samir Medjiah
committed
type: array
items:
$ref: "#/definitions/ExtLinkPortData"
ExtManagedVirtualLinkData:
description: >
This type represents an externally-managed internal VL.
It shall comply with the provisions defined in Table 6.5.3.27-1.
type: object
required:
Samir Medjiah
committed
- resourceId
properties:
extManagedVirtualLinkId:
description: >
The identifier of the externally-managed internal VL
instance, if provided.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
Samir Medjiah
committed
description: >
The identifier of the VLD in the VNFD for this VL.
$ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
Samir Medjiah
committed
vimId:
description: >
Identifier of the VIM that manage this resource. This
attribute shall only be supported and present if VNFrelated
resource management in direct mode is applicable.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
resourceProviderId:
description: >
Identifies the entity responsible for the management of
this resource. This attribute shall only be supported and present if
VNF-related resource management in indirect mode is
applicable. The identification scheme is outside the
scope of the present document.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
resourceId:
description: >
The identifier of the resource in the scope of the VIM or
the resource provider.
$ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVim"
vnfLinkPort:
description: >
Externally provided link ports to be used to connect VNFC connection points to this externally-managed VL on
this network resource. If this attribute is not present, the VNFM shall create the link ports on the
externally-managed VL.
type: array
items:
$ref: "#/definitions/VnfLinkPortData"
extManagedMultisiteVirtualLinkId:
description: >
Identifier of the externally-managed multi-site VL instance. The identifier is assigned by the NFV-MANO entity
that manages the externally managed multi-site VL instance. It shall be present when the present externally-managed
internal VL (indicated by extManagedVirtualLinkId) is part of a multi-site VL, e.g., in support of multi-site VNF
spanning several VIMs. All externally-managed internal VL instances corresponding to an internal VL created based
on the same virtualLinkDescId shall refer to the same extManagedMultisiteVirtualLinkId.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
Samir Medjiah
committed
VnfExtCpData:
description: >
This type represents configuration information for external CPs created
from a CPD.
type: object
required:
- cpdId
properties:
cpdId:
description: >
The identifier of the CPD in the VNFD.
In case this identifier refers to a CPD with trunking enabled, the external CP instances created from this CPD
will represent ports in a trunk.
$ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
Samir Medjiah
committed
cpConfig:
description: >
Map of instance data that need to be configured on the CP instances created from the respective CPD.
The key of the map which identifies the individual VnfExtCpConfig entries is managed by the API consumer.
The entries shall be applied by the VNFM according to the rules of JSON Merge Patch (see IETF RFC 7396).
The map entry value shall be set to "null" in order to delete a "VnfExtCpConfig" entry identified by a
particular key value from the map, i.e. for the disconnection of an existing external CP instance addressed
by cpInstanceId in the deleted map entry from a particular external virtual link, and deletion of that
instance in case it represents a subport. Deleting the last key from the map removes the affected instance
of the "VnfExtCpData" structure from its parent data structure.
Within one VNF instance, all VNFC instances created from a particular VDU have the same external connectivity.
Thus, given a particular value of the “cpdId’ attribute, there shall be one “cpConfig” entry for each VNFC
instance that has been or can be created from a VDU which includes a CPD identified by the “cpdId” attribute.
If the cpConfig represents a subport in a trunk, all “cpConfig” entries in this list shall have the same
segmentationId, which means they are connected to the same set of external VLs via the trunk.
Samir Medjiah
committed
$ref: "#/definitions/VnfExtCpConfig"
ExtLinkPortData:
description: >
This type represents an externally provided link port to be used to
connect an external connection point to an external VL.
type: object
required:
- id
- resourceHandle
properties:
id:
description: >
Identifier of this link port as provided by the entity that has
created the link port.
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
resourceHandle:
description: >
Reference to the virtualised resource realizing this link port.
$ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"
trunkResourceId:
description: >
Identifier of the trunk resource in the VIM.
Shall be present if the present link port corresponds to the parent
port that the trunk resource is associated with.
The value of "trunkResourceId" is scoped by the value of "vimConnectionId"
in the "resourceHandle" attribute.
$ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVim"
Samir Medjiah
committed
VnfExtCpConfig:
description: >
This type represents an externally provided link port or network address
information per instance of an external connection point. In case a link
port is provided, the VNFM shall use that link port when connecting the
external CP to the external VL. In a link port is not provided, the VNFM
shall create a link port on the external VL, and use that link port to
connect the external CP to the external VL.
type: object
anyOf:
- required:
- linkPortId
- required:
- cpProtocolData
Samir Medjiah
committed
properties:
parentCpConfigId:
description: >
Value of the key that identifies to the "VnfExtCpConfig" entry that corresponds to the parent port of the trunk.
Only present in "VnfExtCpConfig" map structures which provide configuration information for a CP which represents
a subport in a trunk, and if parent ports are supported.
$ref: "#/definitions/IdentifierInVnf"
Samir Medjiah
committed
linkPortId:
description: >
Identifier of a pre-configured link port to which the external CP
will be associated.
The following conditions apply to the attributes "linkPortId" and
"cpProtocolData":
* At least one of the "linkPortId" and "cpProtocolData" attributes
shall be present for a to-be-created external CP instance or an
existing external CP instance.
Samir Medjiah
committed
* If the "linkPortId" attribute is absent, the VNFM shall create a
link port.
* If the "cpProtocolData" attribute is absent, the "linkPortId"
attribute shall be provided referencing a pre-created link port,
and the VNFM can use means outside the scope of the present
document to obtain the pre-configured address information for the
connection point from the resource representing the link port.
* If both "cpProtocolData" and "linkportId" are provided, the API
consumer shall ensure that the cpProtocolData can be used with the
pre-created link port referenced by "linkPortId".
$ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
createExtLinkPort:
description: >
Indicates the need to create a dedicated link port for the external CP.
If set to True, a link port is created. If set to False, no link port is created.
This attribute is only applicable for external CP instances without a floating IP
address that expose a VIP CP instance for which a dedicated IP address is allocated.
It shall be present in that case and shall be absent otherwise.
type: boolean
Samir Medjiah
committed
cpProtocolData:
description: >
Parameters for configuring the network protocols on the link port
that connects the CP to a VL.
The following conditions apply to the attributes "linkPortId" and "cpProtocolData":
* At least one of the "linkPortId" and "cpProtocolData" attributes
shall be present for a to-be-created external CP instance or an
existing external CP instance.
* If the "linkPortId" attribute is absent, the VNFM shall create a
link port.
* If the "cpProtocolData" attribute is absent, the "linkPortId"
attribute shall be provided referencing a pre-created link port,
and the VNFM can use means outside the scope of the present
document to obtain the pre-configured address information for the
connection point from the resource representing the link port.
* If both "cpProtocolData" and "linkportId" are provided, the API
consumer shall ensure that the cpProtocolData can be used with the
pre-created link port referenced by "linkPortId".
Samir Medjiah
committed
type: array
items:
$ref: "#/definitions/CpProtocolData"
4897
4898
4899
4900
4901
4902
4903
4904
4905
4906
4907
4908
4909
4910
4911
4912
4913
4914
4915
4916
4917
4918
4919
4920
4921
4922
4923
4924
4925
4926
4927
4928
4929
4930
4931
4932
4933
4934
4935
4936
4937
4938
4939
4940
4941
4942
4943
4944
IdentifierInNs:
description: >
An identifier that is unique with respect to a NS. Representation: string of variable length.
type: string
IdentifierInNsd:
description: >
An identifier that is unique within a NS descriptor. Representation: string of variable length.
type: string
IdentifierInPnf:
description: >
An Identifier that is unique within respect to a PNF. Representation: string of variable length.
type: string
IdentifierInVim:
description: >
An identifier maintained by the VIM or other resource provider.
It is expected to be unique within the VIM instance. Representation: string of variable length.
type: string
IdentifierInVnf:
description: >
An identifier that is unique for the respective type within a VNF
instance, but may not be globally unique.
type: string
MacAddress:
description: >
A MAC address. Representation: string that consists of groups of two hexadecimal digits,
separated by hyphens or colons.
type: string
format: MAC
IpAddress:
description: >
An IPV4 or IPV6 address. Representation: In case of an IPV4 address, string that consists of four decimal
integers separated by dots, each integer ranging from 0 to 255. In case of an IPV6 address, string that
consists of groups of zero to four hexadecimal digits, separated by colons.
type: string
format: IP
IpAddressPrefix:
description: >
An IPV4 or IPV6 address range in CIDR format. For IPV4 address range, refer to IETF RFC 4632 [12].
For IPV6 address range, refer to IETF RFC 4291.
type: string
Samir Medjiah
committed
4945
4946
4947
4948
4949
4950
4951
4952
4953
4954
4955
4956
4957
4958
4959
4960
4961
4962
4963
4964
4965
4966
4967
4968
4969
4970
4971
4972
4973
4974
4975
4976
4977
4978
4979
4980
4981
4982
4983
4984
4985
4986
4987
4988
4989
PortRange:
description: >
The PortRange data type provides the lower and upper bounds of a range of Internet ports.
It shall comply with the provisions defined in Table 6.5.3.42-1.
type: object
required:
- lowerPort
- upperPort
properties:
lowerPort:
description: >
Identifies the lower bound of the port range. upperPort Integer
type: integer
minimum: 0
upperPort:
description: >
Identifies the upper bound of the port range.
type: integer
minimum: 0
Mask:
description: >
The Mask data type identifies the value to be matched for a sequence of
bits at a particular location in a frame. It shall
comply with the provisions defined in Table 6.5.3.41-1.
type: object
required:
- startingPoint
- length
- value
properties:
startingPoint:
description: >
Indicates the offset between the last bit of the source
mac address and the first bit of the sequence of bits
to be matched.
type: integer
length:
description: >
Indicates the number of bits to be matched.
type: integer
value:
description: >
Provide the sequence of bit values to be matched.
type: string
VnfSnapshotInfo:
description: |
This type represents an "Individual VNF snapshot" resource. The "id" attributed is used by the NFVO to index and
identify the VNF snapshots information resources that are accessible via the NFVO. The identifier is still
generated by the VNFM and copied into the present "VnfSnapshotInfo" representing the "Individual VNF snapshot"
resource hold by the NFVO.
type: object
required:
- id
properties: