Skip to content
SOL005NSLifecycleManagement_def.yaml 158 KiB
Newer Older
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      resourceProviderId:
        description: >
          Identifies the entity responsible for the management of
          this resource.
          This attribute shall only be supported and present if
          VNF-related resource management in indirect mode is
          applicable. The identification scheme is outside the
          scope of the present document.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      resourceId:
        description: >
          The identifier of the resource in the scope of the VIM or
          the resource provider.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVim"
      extCps:
        description: >
          External CPs of the VNF to be connected to this external VL.
        type: array
        items:
          $ref: "#/definitions/VnfExtCpData"
      extLinkPorts:
        description: >
          Externally provided link ports to be used to connect
          external connection points to this external VL.
        type: array
        items:
          $ref: "#/definitions/ExtLinkPortData"

  ExtManagedVirtualLinkData:
    description: >
      This type represents an externally-managed internal VL.
      It shall comply with the provisions defined in Table 6.5.3.27-1.
    type: object
    required:
      - virtualLinkDescId
      - resourceId
    properties:
      extManagedVirtualLinkId:
        description: >
          The identifier of the externally-managed internal VL
          instance, if provided.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      vmfVirtualLinkDescId:
        description: >
          The identifier of the VLD in the VNFD for this VL.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
      vimId:
        description: >
          Identifier of the VIM that manage this resource. This
          attribute shall only be supported and present if VNFrelated
          resource management in direct mode is applicable.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      resourceProviderId:
        description: >
          Identifies the entity responsible for the management of
          this resource. This attribute shall only be supported and present if
          VNF-related resource management in indirect mode is
          applicable. The identification scheme is outside the
          scope of the present document.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      resourceId:
        description: >
          The identifier of the resource in the scope of the VIM or
          the resource provider.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVim"

  VnfExtCpData:
    description: >
      This type represents configuration information for external CPs created
      from a CPD.
    type: object
    required:
      - cpdId
    properties:
      cpdId:
        description: >
          The identifier of the CPD in the VNFD.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnfd"
      cpConfig:
        description: >
          List of instance data that need to be configured on the CP instances
          created from the respective CPD.
        type: array
        items:
          $ref: "#/definitions/VnfExtCpConfig"

  ExtLinkPortData:
    description: >
      This type represents an externally provided link port to be used to
      connect an external connection point to an external VL.
    type: object
    required:
      - id
      - resourceHandle
    properties:
      id:
        description: >
          Identifier of this link port as provided by the entity that has
          created the link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      resourceHandle:
        description: >
          Reference to the virtualised resource realizing this link port.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/ResourceHandle"

  VnfExtCpConfig:
    description: >
      This type represents an externally provided link port or network address
      information per instance of an external connection point. In case a link
      port is provided, the VNFM shall use that link port when connecting the
      external CP to the external VL. In a link port is not provided, the VNFM
      shall create a link port on the external VL, and use that link port to
      connect the external CP to the external VL.
    type: object
    properties:
      cpInstanceId:
        description: >
          Identifier of the external CP instance to which this set of
          configuration parameters is requested to be applied.
          Shall be present if this instance has already been created.
        $ref: "../../definitions/SOL005_def.yaml#/definitions/IdentifierInVnf"
      linkPortId:
        description: >
          Identifier of a pre-configured link port to which the external CP
          will be associated.
          The following conditions apply to the attributes "linkPortId" and
          "cpProtocolData":
          * The "linkPortId" and "cpProtocolData" attributes shall both be
            absent for the deletion of an existing external CP instance
            addressed by cpInstanceId.
          * At least one of these attributes shall be present for a
            to-be-created external CP instance or an existing external
            CP instance.
          * If the "linkPortId" attribute is absent, the VNFM shall create a
            link port.
          * If the "cpProtocolData" attribute is absent, the "linkPortId"
            attribute shall be provided referencing a pre-created link port,
            and the VNFM can use means outside the scope of the present
            document to obtain the pre-configured address information for the
            connection point from the resource representing the link port.
          * If both "cpProtocolData" and "linkportId" are provided, the API
            consumer shall ensure that the cpProtocolData can be used with the
            pre-created link port referenced by "linkPortId".
        $ref: "../../definitions/SOL005_def.yaml#/definitions/Identifier"
      cpProtocolData:
        description: >
          Parameters for configuring the network protocols on the link port
          that connects the CP to a VL.
          The following conditions apply to the attributes "linkPortId" and
          "cpProtocolData":
          * The "linkPortId" and "cpProtocolData" attributes shall both be
            absent for the deletion of an existing external CP instance
            addressed by cpInstanceId.
          * At least one of these attributes shall be present for a
            to-be-created external CP instance or an existing external
            CP instance.
          * If the "linkPortId" attribute is absent, the VNFM shall create a
            link port.
          * If the "cpProtocolData" attribute is absent, the "linkPortId"
            attribute shall be provided referencing a pre-created link port,
            and the VNFM can use means outside the scope of the present
            document to obtain the pre-configured address information for the
            connection point from the resource representing the link port.
          * If both "cpProtocolData" and "linkportId" are provided, the API
            consumer shall ensure that the cpProtocolData can be used with the
            pre-created link port referenced by "linkPortId".
        type: array
        items:
          $ref: "#/definitions/CpProtocolData"

  PortRange:
    description: >
      The PortRange data type provides the lower and upper bounds of a range of Internet ports.
      It shall comply with the provisions defined in Table 6.5.3.42-1.
    type: object
    required:
      - lowerPort
      - upperPort
    properties:
      lowerPort:
        description: >
          Identifies the lower bound of the port range. upperPort Integer
        type: integer
        minimum: 0
      upperPort:
        description: >
          Identifies the upper bound of the port range.
        type: integer
        minimum: 0

  Mask:
    description: >
      The Mask data type identifies the value to be matched for a sequence of
      bits at a particular location in a frame. It shall
      comply with the provisions defined in Table 6.5.3.41-1.
    type: object
    required:
      - startingPoint
      - length
      - value
    properties:
      startingPoint:
        description: >
          Indicates the offset between the last bit of the source
          mac address and the first bit of the sequence of bits
          to be matched.
        type: integer
      length:
        description: >
          Indicates the number of bits to be matched.
        type: integer
      value:
        description: >
          Provide the sequence of bit values to be matched.
        type: string