SOL003VNFLifecycleOperationGranting_def.yaml

# Copyright (c) ETSI 2017.
# https://forge.etsi.org/etsi-forge-copyright-notice.txt

definitions:
  GrantRequest:
    description: >
      This type represents a grant request. It shall comply with the provisions defined in table 9.5.2.2-1.

      NOTE 1:	The VNF LCM operations CreateVnfIdentifier, DeleteVnfIdentifier, QueryVnf and ModifyVnfInformation 
              can be executed by the VNFM without requesting granting.
      NOTE 2:	If the granting request is for InstantiateVNF, either instantiationLevel or addResources shall be present.
      NOTE 3:	The NFVO will assume that the VNFM will be responsible to both allocate and release the temporary resource 
              during the runtime of the LCM operation. This means, the resource can be allocated and consumed after the 
              "start" notification for the LCM operation is sent by the VNFM, and the resource will be released before the 
              "result" notification of the VNF LCM operation is sent by the VNFM.
      NOTE 4:	The affinity/anti-affinity rules defined in the VNFD and the placement constraints in the GrantVnfLifecycleOperation 
              as defined in this clause should be conflict-free. In case of conflicts, the placement constraints in the 
              GrantVnfLifecycleOperation shall take precedence.
      NOTE 5:	Passing constraints allows the VNFM or the lifecycle management scripts to influence resource placement decisions 
              by the NFVO to ensure VNF properties such as performance or fault tolerance.
      NOTE 6:	If fallbackBestEffort is present in placement constraints and set to "true", the NFVO shall process the Affinity/AntiAffinity 
              constraint in a best effort manner, in which case, if specified resources cannot be allocated based on specified placement 
              constraint, the NFVO looks for an alternate best effort placement for the specified resources to be granted. 
              In the best effort anti-affinity case, the resources are expected to be spread optimally over all available instances of scope 
              (e.g. zones), and in the best effort affinity case, they are expected to be distributed optimally over fewer possible instances 
              of scope.
    type: object
    required:
      - vnfInstanceId
      - vnfLcmOpOccId
      - vnfdId
      - operation
      - isAutomaticInvocation
      - _links
    properties:
      vnfInstanceId:
        description: >
          Identifier of the VNF instance which this grant request is related
          to. Shall also be provided for VNFs that not yet exist but are
          planned to exist in the future, i.e. if the grant is requested for
          InstantiateVNF.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfLcmOpOccId:
        description: >
          The identifier of the VNF lifecycle management operation occurrence
          associated to the GrantRequest.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfdId:
        description: >
          Identifier of the VNFD that defines the VNF for which the LCM
          operation is to be granted.
          In case of the "Change current VNF package operation, this identifier
          refers to the VNFD which defines the VNF before the LCM operation to 
          be granted.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      dstVnfdId:
        description: >
          Identifier of the "destination" VNFD which will define the VNF after 
          executing the "Change current VNF package" LCM operation to be granted. 
          Shall be included if the operation changes the current VNF Package and 
          shall be absent otherwise.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      flavourId:
        description: >
          Identifier of the VNF deployment flavour of the VNFD that defines
          the VNF for which the LCM operation is to be granted.
          Shall be provided when instantiating the VNF or changing the
          deployment flavour of the VNF instance.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      operation:
        description: >
          The lifecycle management operation for which granting is requested. See note 1. 
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/GrantedLcmOperationType"
      isAutomaticInvocation:
        description: >
          Set to true if this VNF LCM operation occurrence has been triggered
          by an automated procedure inside the VNFM
          (i.e. ScaleVnf / ScaleVnfToLevel triggered by auto-scale, or HealVnf
          triggered by auto-heal).
          Set to false otherwise.
        type: boolean
      instantiationLevelId:
        description: >
         If operation=INSTANTIATE, the identifier of the instantiation level may be provided as an 
         alternative way to define the resources to be added. This attribute shall only be used if 
         operation=INSTANTIATE. See note 2.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      addResources:
        description: >
          List of resource definitions in the VNFD for resources to be added by the LCM operation 
          which is related to this grant request, with one entry per resource. See note 2.
        type: array
        items:
          $ref: "#/definitions/ResourceDefinition"
      tempResources:
        description: >
          List of resource definitions in the VNFD for resources to be temporarily instantiated during 
          the runtime of the LCM operation which is related to this grant request, with one entry per 
          resource. See note 3.
        type: array
        items:
          $ref: "#/definitions/ResourceDefinition"
      removeResources:
        description: >
          Provides the definitions of resources to be removed by the LCM
          operation which is related to this grant request, with one entry per
          resource.
        type: array
        items:
          $ref: "#/definitions/ResourceDefinition"
      updateResources:
        description: >
          Provides the definitions of resources to be modified by the LCM
          operation which is related to this grant request, with one entry per
          resource.
        type: array
        items:
          $ref: "#/definitions/ResourceDefinition"
      placementConstraints:
        description: >
          Placement constraints that the VNFM may send to the NFVO in order to influence the resource 
          placement decision. If sent, the NFVO shall take the constraints into consideration when making 
          resource placement decisions and shall reject the grant if they cannot be honoured. See notes 4, 
          5 and 6.
        type: array
        items:
          $ref: "#/definitions/PlacementConstraint"
      vimConstraints:
        description: >
          Used by the VNFM to require that multiple resources are managed
          through the same VIM connection. If sent, the NFVO shall take the
          constraints into consideration when making VIM selection decisions,
          and shall reject the grant if they cannot be honoured.
          This attribute shall be supported if VNF-related Resource Management
          in direct mode is applicable.
          The applicability and further details of this attribute for indirect
          mode are left for future specification.
        type: array
        items:
          $ref: "#/definitions/VimConstraint"
      additionalParams:
        description: >
          Additional parameters passed by the VNFM, specific to the VNF and
          the LCM operation.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      _links:
        description: >
          Links to resources related to this request.
        type: object
        required:
          - vnfLcmOpOcc
          - vnfInstance
        properties:
          vnfLcmOpOcc:
            description: >
              Related lifecycle management operation occurrence.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          vnfInstance:
            description: >
              Related VNF instance.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"

  Grant:
    description: >
      This type represents a grant.

      NOTE 1: This interface allows to signal the use of multiple VIMs per VNF. 
              However, due to the partial support of this feature in the present 
              release, it is recommended in the present document that the number 
              of entries in the "vims" attribute in the Grant is not greater than 1.
      NOTE 2: Void.
      NOTE 3: The Grant response allows the NFVO to pass to the VNFM VIM assets 
              related to the VNF package that is identified by the vnfdId attribute 
              in the corresponding Grant request. The NFVO may send in each Grant 
              response the full set of VIM assets related to the VNF package defined 
              by the vnfdId in the related Grant request, but shall send this information 
              if the vnfdId in the related Grant request differs from the vnfdId passed 
              in the previous Grant request, or if the Grant response is related to an 
              InstantiateVnf operation. The set of VIM assets shall not change between 
              subsequent Grant responses if the vnfdId has not changed. During each LCM 
              operation occurrence, the VIM assets that relate to the VNF package identified 
              by the current value of the vnfdId attribute in the "VnfInstance" structure 
              shall be used by the VNFM for newly created resources. If the VNF package 
              identifier of the VNF instance has been updated, VIM assets that relate to 
              the previously-used VNF package(s), and that were communicated in previous 
              Grant responses, apply to existing resources.
      NOTE 4: The indication of externally-managed internal VLs is needed in case networks 
              have been pre-configured for use with certain VNFs, for instance to ensure that 
              these networks have certain properties such as security or acceleration features, 
              or to address particular network topologies. The present document assumes that 
              externally-managed internal VLs are managed by the NFVO and created towards the VIM.
      NOTE 5: For any VNF lifecycle management operation request that allows to pass "extVirtualLinks" 
              and/or "extManagedVirtualLinks" parameters, such as InstantiateVnf, ChangeVnfFlavour, 
              ChangeExtVnfConnectivity or ChangeCurrentVnfPackage, the NFVO may provide the "extVirtualLinks" 
              and/or "extManagedVirtualLinks" attributes in the Grant to override the values passed 
              in these parameters previously in the associated VNF lifecycle management request, if 
              the lifecycle management request has originated from the NFVO itself. The NFVO shall 
              not provide the "extVirtualLinks" and/or "extManagedVirtualLinks" attributes in the 
              Grant otherwise.
      NOTE 6: The NFVO shall set the value of the attribute by copying the value from the associated 
              GrantRequest.
      NOTE 7: In case of granting an InstantiateVnf request that has originated from the NFVO and that 
              did not contain the "extVirtualLinks" attribute, this attribute shall be set by the NFVO. 
              Further in case of granting an InstantiateVnf request that has originated from the NFVO 
              and that did not contain the "extManagedVirtualLinks" attribute, this attribute shall be 
              set by the NFVO if there is the need to provide information about externally-managed virtual 
              links.
    type: object
    required:
      - id
      - vnfInstanceId
      - vnfLcmOpOccId
      - _links
    properties:
      id:
        description: >
          Identifier of the grant.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfInstanceId:
        description: >
          Identifier of the related VNF instance. See note 6.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfLcmOpOccId:
        description: >
          Identifier of the related VNF lifecycle management operation occurrence. 
          See note 6.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vimConnectionInfo:
        description: >
          Provides information regarding VIM connections that are approved to be used 
          by the VNFM to allocate resources and provides parameters of these VIM connections. 
          
          The VNFM shall update the "vimConnectionInfo" attribute of the "VnfInstance" structure 
          by adding unknown entries received in this attribute. 
          
          This attribute is not intended for the modification of VimConnectionInfo entries passed 
          earlier; for that, the VnfInfoModificationRequest structure shall be used.
          
          This attribute shall only be supported when VNF-related Resource Management in direct mode 
          is applicable. In direct mode, this parameter shall be absent if the VIM information was 
          configured to the VNFM in another way, present otherwise. See note 1.
        type: object
        additionalProperties:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/VimConnectionInfo"
      zones:
        description: >
          Identifies resource zones where the resources are approved to be
          allocated by the VNFM.
        type: array
        items:
          $ref: "#/definitions/ZoneInfo"
      zoneGroups:
        description: >
          Information about groups of resource zones that are related and that
          the NFVO has chosen to fulfil a zoneGroup constraint in the
          GrantVnfLifecycleOperation request.
          This information confirms that the NFVO has honoured the zoneGroup
          constraints that were passed as part of "placementConstraints" in the
          GrantRequest.
        type: array
        items:
          $ref: "#/definitions/ZoneGroupInfo"
      addResources:
        description: >
          List of resources that are approved to be added, with one entry per
          resource. Shall be set when resources are approved to be added and 
          shall contain the same set of resources requested to be added in the 
          related GrantRequest.
        type: array
        items:
          $ref: "#/definitions/GrantInfo"
      tempResources:
        description: >
          List of resources that are approved to be temporarily instantiated
          during the runtime of the lifecycle operation, with one entry per
          resource. Shall be set when resources are approved to be temporarily 
          instantiated and shall contain the same set of resources requested to 
          be temporarily instantiated in the related GrantRequest.
        type: array
        items:
          $ref: "#/definitions/GrantInfo"
      removeResources:
        description: >
          List of resources that are approved to be removed, with one entry
          per resource. Shall be set when resources are approved to be removed
          and shall contain the same set of resources requested to be removed 
          in the related GrantRequest.
        type: array
        items:
          $ref: "#/definitions/GrantInfo"
      updateResources:
        description: >
          List of resources that are approved to be modified, with one entry
          per resource. Shall be set when resources are approved to be updated
          and shall contain the same set of resources requested to be updated 
          in the related GrantRequest.
        type: array
        items:
          $ref: "#/definitions/GrantInfo"
      vimAssets:
        description: >
          Information about assets for the VNF that are managed by the NFVO in the VIM, 
          such as software images and virtualised compute resource flavours. See note 3.
        type: object
        properties:
          computeResourceFlavours:
            description: >
              Mappings between virtual compute descriptors defined in the VNFD
              and compute resource flavours managed in the VIM.
            type: array
            items:
              $ref: "#/definitions/VimComputeResourceFlavour"
          softwareImages:
            description: >
              Mappings between software images defined in the VNFD and
              software images managed in the VIM.
            type: array
            items:
              $ref: "#/definitions/VimSoftwareImage"
          snapshotResources:
            description: >
              Mappings between snapshot resources defined in the VNF snapshot package and resources
              managed in the VIM.
            type: array
            items:
              $ref: "#/definitions/VimSnapshotResource"
      extVirtualLinks:
        description: >
          Information about external VLs to connect the VNF to. See notes 5 and 7. If this attribute 
          is present according to note 5 or note 7, it need not contain those entries that are unchanged 
          compared to the entries that were passed in the LCM operation which is related to this granting exchange.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ExtVirtualLinkData"
      extManagedVirtualLinks:
        description: >
          Information about internal VLs that are managed by other entities than the VNFM. See notes 4, 5 and 7.
        type: array
        items:
          $ref: "../../VNFLifecycleManagement/definitions/SOL003VNFLifecycleManagement_def.yaml#/definitions/ExtManagedVirtualLinkData"
      additionalParams:
        description: >
          Additional parameters passed by the NFVO, specific to the VNF and
          the LCM operation.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/KeyValuePairs"
      _links:
        description: >
          Links to resources related to this resource.
        type: object
        required:
          - self
          - vnfLcmOpOcc
          - vnfInstance
        properties:
          self:
            description: >
              URI of this resource.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          vnfLcmOpOcc:
            description: >
              Related VNF lifecycle management operation occurrence.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"
          vnfInstance:
            description: >
              Related VNF instance.
            $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Link"

  ResourceDefinition:
    description: >
      This type provides information of an existing or proposed resource used by the VNF. 
      It shall comply with the provisions defined in table 9.5.3.2-1.

      NOTE 1:	The use cases UC#4 and UC#5 in Annex A.4 of ETSI GS NFV-IFA 007 provide examples
                for such a configuration.
      NOTE 2:	In the context of an operation that changes the current VNF package, the following applies: If this
                ResourceDefinition is related to a resource to be created or modified, the "vnfdId" attribute shall
                contain the identifier of the destination VNFD. If this ResourceDefinition is related to a resource
                to be deleted, the "vnfdId" attribute shall contain the identifier of the source VNFD. If this
                ResourceDefinition is related to a temporary resource, the "vnfdId" attribute shall contain the
                identifier of either the source VNFD or the destination VNFD.
    type: object
    required:
      - id
      - type
    properties:
      id:
        description: >
          Identifier of this "ResourceDefinition" structure, unique at least
          within the scope of the "GrantRequest" structure.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"
      type:
        description: >
          Type of the resource definition referenced.
          Permitted values:
          * COMPUTE
          * VL
          * STORAGE
          * LINKPORT
        type: string
        enum:
          - COMPUTE
          - VL
          - STORAGE
          - LINKPORT
      vduId:
        description: >
          Reference to the related VDU in the VNFD applicable to this
          resource.
          Shall only be present if a VDU is applicable to this resource,
          i.e. if "type" has the value "COMPUTE".
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      vnfdId:
        description: >
          Identifier of the VNFD to which resourceTemplateId and vduId refer. Shall be present 
          if the operation to be granted changes the current VNF Package. May be absent otherwise. See note 2.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      resourceTemplateId:
        description: >
          Reference to the applicable resource template in the VNFD as follows:
            - if type="VL" : VnfVirtualLinkDesc
            - if type="COMPUTE": VirtualComputeDesc
            - if type="LINKPORT" : VnfExtCpd
            - if type="STORAGE" : VirtualStorageDesc
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      secondaryResourceTemplateId:
        description: >
          Reference to a secondary resource template (VnfExtCpd) in the VNFD.
          Shall be present if type="LINKPORT" and the linkport is shared by two external CP instances, 
          one exposing a VNFC CP instance (based on a VnfExtCpd referenced by "resourceTemplateId") and 
          another one exposing a VIP CP instance (based on a VnfExtCpd referenced by this attribute). 
          Shall be absent otherwise. See note 1.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      resource:
        description: >
          Resource information for an existing resource. Shall be present for
          resources that are planned to be deleted or modified. Shall be
          absent otherwise.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ResourceHandle"
      snapshotResDef:
        description: >
          Information to identify a snapshot resource. Shall only be present if the 
          operation to be granted concerns to creating a VNF snapshot from the VNF
          or to reverting the VNF to a VNF snapshot.
        $ref: "#/definitions/SnapshotResourceDefinition"

  GrantInfo:
    description: >
      This type contains information about a Compute, storage or network
      resource whose addition/update/deletion was granted.
    type: object
    required:
      - resourceDefinitionId
    properties:
      resourceDefinitionId:
        description: >
          Identifier of the related "ResourceDefinition" structure from the
          related "GrantRequest" structure.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"
      reservationId:
        description: >
          The reservation identifier applicable to the VNFC/VirtualLink/VirtualStorage/compute 
          host. It shall be present for new resources when policy is GRANT_RESERVE and an 
          applicable reservation exists; shall not be present otherwise.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVim"
      vimConnectionId:
        description: >
          Identifier of the VIM connection to be used to manage this resource.
          Shall be present for new resources, and shall be absent for
          resources that have already been allocated.
          The applicable "VimConnectionInfo" structure, which is referenced by
          vimConnectionId, can be obtained from the "vimConnectionInfo"
          attribute of the "VnfInstance" structure.
          This attribute shall only be supported when VNF-related Resource
          Management in direct mode is applicable.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      resourceProviderId:
        description: >
          Identifies the entity responsible for the management of the
          virtualised resource. Shall be present for new resources, and shall
          be absent for resources that have already been allocated.
          This attribute shall only be supported when VNF-related Resource
          Management in indirect mode is applicable. The identification scheme
          is outside the scope of the present document.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      zoneId:
        description: >
          Reference to the identifier of the "ZoneInfo" structure in the
          "Grant" structure defining the resource zone into which this
          resource is to be placed. Shall be present for new resources if the
          zones concept is applicable to them (typically, Compute resources),
          and shall be absent for resources that have already been allocated.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"
      resourceGroupId:
        description: >
          Identifier of the "infrastructure resource group", logical grouping
          of virtual resources assigned to a tenant within an Infrastructure
          Domain, to be provided when allocating the resource.
          If the VIM connection referenced by "vimConnectionId" applies to
          multiple infrastructure resource groups, this attribute shall be
          present for new resources.
          If the VIM connection referenced by "vimConnectionId" applies to a
          single infrastructure resource group, this attribute may be present
          for new resources.
          This attribute shall be absent for resources that have already been
          allocated.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVim"

  ZoneInfo:
    description: >
      This type provides information regarding a resource zone.
    type: object
    required:
      - id
      - zoneId
    properties:
      id:
        description: >
          The identifier of this ZoneInfo instance, for the purpose of
          referencing it from other structures in the "Grant" structure.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"
      zoneId:
        description: >
          The identifier of the resource zone, as managed by the resource
          management layer (typically, the VIM).
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vimConnectionId:
        description: >
          Identifier of the connection to the VIM that manages the resource
          zone.
          The applicable "VimConnectionInfo" structure, which is referenced by
          vimConnectionId, can be obtained from the " vimConnectionInfo"
          attribute of the "VnfInstance" structure.
          This attribute shall only be supported and present when VNF-related
          Resource Management in direct mode is applicable.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      resourceProviderId:
        description: >
          Identifies the entity responsible for the management the resource
          zone.
          This attribute shall only be supported and present when VNF-related
          Resource Management in indirect mode is applicable. The
          identification scheme is outside the scope of the present document.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"

  ZoneGroupInfo:
    description: >
      This type provides information regarding a resource zone group. A
      resource zone group is a group of one or more related resource zones
      which can be used in resource placement constraints. To fulfil such
      constraint, the NFVO may decide to place a resource into any zone that
      belongs to a particular group.
      NOTE: A resource zone group can be used to support overflow from one
      resource zone into another, in case a particular deployment supports
      only non-elastic resource zones.
    type: object
    required:
      - zoneId
    properties:
      zoneId:
        description: >
          References of identifiers of "ZoneInfo" structures, each of which
          provides information about a resource zone that belongs to this
          group.
        type: array
        items:
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"

  PlacementConstraint:
    description: >
      This type provides information regarding a resource placement
      constraint. A set of such constraints may be sent by the VNFM to the
      NFVO to influence the resource placement decisions made by the NFVO as
      part of the granting process.
      A placement constraint defines a condition to the placement of new
      resources, considering other new resources as well as existing resources.
      EXAMPLE:
      The following rules influence the placement of a set of resources such
      that they are placed in the same Network Function Virtualisation
      Infrastructure Point of Presence (NFVI-PoP) but in different resource
      zones:
      {type="AFFINITY"; scope="NFVI_POP"; {resource1,resource2}}
      {type="ANTI_AFFINITY"; scope="ZONE"; {resource1,resource2}}
    type: object
    required:
      - affinityOrAntiAffinity
      - scope
      - resource
    properties:
      affinityOrAntiAffinity:
        description: >
          The type of the constraint.
          Permitted values:
          * AFFINITY
          * ANTI_AFFINITY
        type: string
        enum:
          - AFFINITY
          - ANTI_AFFINITY
      scope:
        description: >
          The scope of the placement constraint indicating the category of the
          "place" where the constraint applies.
          Permitted values:
          * NFVI_POP
          * ZONE
          * ZONE_GROUP
          * NFVI_NODE
        type: string
        enum:
          - NFVI_POP
          - ZONE
          - ZONE_GROUP
          - NFVI_NODE
      resource:
        description: >
          References to resources in the constraint rule.
        type: array
        minItems: 2
        items:
          $ref: "#/definitions/ConstraintResourceRef"
      fallbackBestEffort:
        description: >
          Indication if the constraint is handled with fall back best effort. Default value is “false”.
          If set to true, the Affinity/Anti_Affinity placement constraint need not be fully satisfied,
          i.e. if the allocation cannot be honoured with the placement constraint, the request is
          processed in a best effort manner.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Boolean"

  VimConstraint:
    description: >
      This type provides information regarding a VIM selection constraint. A
      set of such constraints may be sent by the VNFM to the NFVO to influence
      the VIM selection decisions made by the NFVO as part of the granting
      process.
    type: object
    required:
      - resource
    properties:
      sameResourceGroup:
        description: >
          If present and set to true, this signals that the constraint applies
          not only to the same VIM connection, but also to the same
          infrastructure resource group.
        type: boolean
      resource:
        description: >
          References to resources in the constraint rule.
          The NFVO shall ensure that all resources in this list are managed
          through the same VIM connection. If "sameResourceGroup" is set to
          true, the NFVO shall further ensure that all resources in this list
          are part of the same infrastructure resource group in that VIM
          connection.
        type: array
        minItems: 2
        items:
          $ref: "#/definitions/ConstraintResourceRef"

  ConstraintResourceRef:
    description: >
      This type references a resource either by its VIM-level identifier for
      existing resources, or by the identifier of a "ResourceDefinition"
      structure in the "GrantRequest" structure for new resources.
    type: object
    required:
      - idType
      - resourceId
    properties:
      idType:
        description: >
          The type of the identifier.
          Permitted values:
          * RES_MGMT: Resource-management-level identifier; this identifier is
            managed by the VIM in the direct mode of VNF-related resource
            management, and is managed by the NFVO in the indirect mode)
          * GRANT: Reference to the identifier of a "ResourceDefinition"
          structure in the "GrantRequest" structure.
        type: string
        enum:
          - RES_MGMT
          - GRANT
      resourceId:
        description: >
          An actual resource-management-level identifier (idType=RES_MGMT),
          or an identifier that references a "ResourceDefinition" structure in
          the related "GrantRequest" structure (idType=GRANT).
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVim"
      vimConnectionId:
        description: >
          Identifier of the VIM connection for managing the resource. It shall
          only be present when idType = RES_MGMT.
          The applicable "VimConnectionInfo" structure, which is referenced by
          vimConnectionId, can be obtained from the "vimConnectionInfo"
          attribute of the "VnfInstance" structure.
          This attribute shall only be supported when VNF-related resource
          management in direct mode is applicable.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      resourceProviderId:
        description: >
          Identifier of the resource provider. It shall only be present when
          idType = RES_MGMT.
          This attribute shall only be supported when VNF-related resource
          management in indirect mode is applicable. The identification scheme
          is outside the scope of the present document.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"

  VimComputeResourceFlavour:
    description: >
      If the VIM requires the use of virtual compute resource flavours during
      compute resource instantiation, it is assumed that such flavours are
      selected or created by the NFVO based on the information in the virtual
      compute descriptor defined in the VNFD.
      This type defines the mapping between a virtual compute descriptor in
      the VNFD and the corresponding compute resource flavour managed by the
      NFVO in the VIM.
    type: object
    required:
      - vnfdVirtualComputeDescId
      - vimFlavourId
    properties:
      vimConnectionId:
        description: >
          Identifier of the VIM connection to access the flavour referenced in
          this structure.
          The applicable "VimConnectionInfo" structure, which is referenced by
          vimConnectionId, can be obtained from the "vimConnectionInfo"
          attribute of the "VnfInstance" structure.
          This attribute shall only be supported and present if VNF-related
          resource management in direct mode is applicable.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      resourceProviderId:
        description: >
          Identifies the entity responsible for the management of the
          virtualised resource.
          This attribute shall only be supported and present if VNF-related
          resource management in indirect mode is applicable. The
          identification scheme is outside the scope of the present document.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfdVirtualComputeDescId:
        description: >
          Identifier which references the virtual compute descriptor in the
          VNFD that maps to this flavour.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      vimFlavourId:
        description: >
          Identifier of the compute resource flavour in the resource
          management layer (i.e. VIM).
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVim"

  VimSoftwareImage:
    description: >
      This type contains a mapping between a software image definition the
      VNFD and the corresponding software image managed by the NFVO in the
      VIM which is needed during compute resource instantiation.
    type: object
    required:
      - vnfdSoftwareImageId
      - vimSoftwareImageId
    properties:
      vimConnectionId:
        description: >
          Identifier of the VIM connection to access the software image
          referenced in this structure.
          The applicable "VimConnectionInfo" structure, which is referenced by
          vimConnectionId, can be obtained from the "vimConnectionInfo"
          attribute of the "VnfInstance" structure.
          This attribute shall only be supported and present if VNF-related
          resource management in direct mode is applicable.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      resourceProviderId:
        description: >
          Identifies the entity responsible for the management of the
          virtualised resource.
          This attribute shall only be supported and present if VNF-related
          resource management in indirect mode is applicable. The
          identification scheme is outside the scope of the present document.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfdSoftwareImageId:
        description: >
          Identifier which references the software image descriptor in the
          VNFD.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnfd"
      vimSoftwareImageId:
        description: >
          Identifier of the software image in the resource management layer
          (i.e. VIM).
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVim"
      
  SnapshotResourceDefinition:
    description: >
      This type represents resource definition information related to a snapshot resource. 
      It shall comply with the provisions defined in table 9.5.3.11-1.

      NOTE 1:	If present, the value of the "vduId" (for a related VDU) in the "VnfcResourceInfo" 
              referred by the "vnfcInfoId" of the "VnfcSnapshotInfo" shall match the value of the 
              "vduId" in the resource definition that is signalled in the granting request.
      NOTE 2:	For snapshot resource definitions extracted from a VNF snapshot package, only the 
              "vnfcSnapshotId" and "storageSnapshotId" (in case of a storage type of resource) 
              are applicable. If the snapshot resource definition is generated as part of a VNF 
              snapshot created by the VNFM (that is, not extracted from a VNF snapshot package), 
              the "snapshotResource" is applicable. This is a similar specification as the one 
              defined with the "vduId", "resourceTemplateId" and "resource" attributes provided in 
              the ResourceDefinition, but in this case applicable to resources that are defined from 
              VNF snapshots instead of VNFD.
    type: object
    required:
    - vnfSnapshotId
    properties:
      vnfSnapshotId:
        description: >
          Identifier of the VNF snapshot related to the resource change for the VNF instance. 
          Shall only be present if the operation to be granted concerns to creating a VNF snapshot 
          from the VNF or to reverting the VNF to a VNF snapshot.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfcSnapshotId:
        description: >
          Reference to the information about a specific VNFC snapshot (refer to "VnfcSnapshotInfo") of 
          the VNF snapshot. The identifier is unique within the scope of a VNF snapshot, identified by 
          the "vnfSnapshotId" attribute. Shall only be present if the operation to be granted concerns 
          to reverting the VNF to a VNF snapshot, and the resource is planned to be added based on the 
          VNFC snapshot, and the type of resource is "COMPUTE" or "STORAGE". See notes 1 and 2.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"
      storageSnapshotId:
        description: >
          Reference to a snapshotted storage resource associated to the VNFC snapshot. Shall only be present 
          if the operation to be granted concerns to reverting the VNF to a VNF snapshot, and the storage 
          resource is planned to be added based on the VNFC snapshot, and the type of resource is "STORAGE". 
          See note 2.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      snapshotResource:
        description: >
          Resource information for an existing snapshot resource. Shall only be present if the operation to 
          be granted concerns to reverting the VNF to a VNF snapshot and the resource is planned to be added 
          based on an existing VNF snapshot that has been created by the VNFM. Shall be absent otherwise. 
          See note 2.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/ResourceHandle"
  
  VimSnapshotResource:
    description: >
      This type contains a mapping between a snapshot resource definition related to a VNF snapshot 
      and the corresponding resource managed by the NFVO in the VIM which is needed during the revert 
      to VNF snapshot operation.
    type: object
    required:
    - vnfSnapshotId
    - vnfcSnapshotId
    - vimSnapshotResourceId
    properties:
      vimConnectionId:
        description: >
          Identifier of the VIM connection to access the software image referenced in this structure.
          The applicable "VimConnectionInfo" structure, which is referenced by vimConnectionId, can be
          obtained from the "vimConnectionInfo" attribute of the "VnfInstance" structure.
          This attribute shall only be supported and present if VNF-related resource management in direct 
          mode is applicable.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      resourceProviderId:
        description: >
          Identifies the entity responsible for the management of the virtualised resource.
          This attribute shall only be supported and present if VNF-related resource management in indirect 
          mode is applicable. The identification scheme is outside the scope of the present document.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfSnapshotId:
        description: >
          Identifier of the VNF snapshot (referring to the "id" attribute in the "VnfSnapshot" data structure) 
          related to this VIM snapshot resource.  
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/Identifier"
      vnfcSnapshotId:
        description: >
          Identifier of the information about a specific VNFC snapshot (refer to "VnfcSnapshotInfo") of 
          the VNF snapshot. The identifier is unique within the scope of a VNF snapshot, identified by 
          the "vnfSnapshotId" attribute.
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierLocal"
      storageSnapshotId:
        description: >
          Identifier of the virtual storage resource that has been snapshotted as referred in the VNFC
          snapshot information. Shall only be present if the snapshot resource in the VIM is a storage 
          resource (as indicated by "type=STORAGE" in the parent resource definition).
          $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVnf"
      vimSnapshotResourceId:
        description: >
          Identifier of the snapshot resource in the resource management layer (i.e. VIM).
        $ref: "../../../definitions/SOL002SOL003_def.yaml#/definitions/IdentifierInVim"