Newer
Older
* @version $URL$
* $Id$
* @desc This module provides test cases for S1AP tests.
* @copyright ETSI Copyright Notification
* No part may be reproduced except as authorized by written permission.
* The copyright and the foregoing restriction extend to reproduction in all media.
* All rights reserved.
* @see ETSI TS 136 413 / 3GPP TS 36.413 version 13.4.0 Release 13
import from S1AP_TestConfiguration all;
import from S1AP_TestSystem all;
import from S1AP_TCFunctions all;
/**
* @desc E-RAB management group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.2 E-RAB management group
*/
/**
* @desc Verify that the IUT can successfully process all mandatory IEs in an E-RAB_SETUP_REQUEST received
* due to E-RAB management procedure and send E-RAB_SETUP_RESPONSE with successfully established E-RABs
* included in the E-RAB_Setup_List IE.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of an E-RAB_SETUP_REQUEST
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-RAB_to_be_Setup_List
* containing an E-RAB_to_be_Setup Item 1
* containing an E-RAB_ID
* containing an E-RAB_Level_QoS_Parameters
* containing QCI
* indicating value 5
* containing a Transport_Layer_Address
* containing a GTP-TEID
* containing a NAS-PDU
* sends an E-RAB_SETUP_RESPONSE
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-RAB_Setup_List
* containing an E-RAB_Setup Item 1
* containing an E-RAB_ID
* containing a Transport_Layer_Address
* containing a GTP-TEID.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_RAB_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.2.1.2(1st dashed line in 5th dashed list) and 9.1.3.1 and 9.1.3.2
*/
testcase TC_S1AP_eNB_RAB_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
/**
* @desc Verify that the IUT after receiving an E-RAB_SETUP_REQUEST with failed E-RAB sends an E-RAB_SETUP_RESPONSE
* with E-RAB_Failed_to_Setup_List.
* <pre>
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of an E-RAB_SETUP_REQUEST
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-RAB_to_be_Setup_List
* containing an E-RAB_to_be_Setup Item 1
* containing an E-RAB_ID
* indicating value A
* containing an E-RAB_Level_QoS_Parameters
* containing a Transport_Layer_Address
* containing a GTP-TEID
* containing a NAS-PDU
* containing an E-RAB_to_be_Setup Item 2(not acceptable data for eNB)
* containing an E-RAB_ID
* indicating value B(different to value A)
* containing an E-RAB_Level_QoS_Parameters
* containing QCI
* indicating not supported QCI value(255)
* containing a Transport_Layer_Address
* containing a GTP-TEID
* containing a NAS-PDU
* sends an E-RAB_SETUP_RESPONSE
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-RAB_Setup_List
* containing an E-RAB_Setup Item 1
* containing an E-RAB_ID
* indicating value A
* containing a Transport_Layer_Address
* containing a GTP-TEID
* containing an E-RAB_Failed_to_Setup_List
* containing an E-RAB_List Item 1
* containing an E-RAB_ID
* indicating value B
* containing a Cause
* indicating ‘not-supported-QCI-value’.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_RAB_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.2.1.2(2nd dashed line in 5th dashed list) and 9.1.3.1 and 9.1.3.2
*/
testcase TC_S1AP_eNB_RAB_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
group Context_Management_group {
testcase TC_S1AP_eNB_CMP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_01
testcase TC_S1AP_eNB_CMP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_02
testcase TC_S1AP_eNB_CMP_03() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_03());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_03
testcase TC_S1AP_eNB_CMP_04() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_04());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_04
testcase TC_S1AP_eNB_CMP_05() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_05());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_05
testcase TC_S1AP_eNB_CMP_06() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_06());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_06
testcase TC_S1AP_eNB_CMP_07() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_07());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_07
testcase TC_S1AP_eNB_CMP_08() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_08());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_08
testcase TC_S1AP_eNB_CMP_09() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_09());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_09
testcase TC_S1AP_eNB_CMP_10() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_10());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_10
testcase TC_S1AP_eNB_CMP_11() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_11());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_11
testcase TC_S1AP_eNB_CMP_12() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_12());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_12
testcase TC_S1AP_eNB_CMP_13() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_13());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_13
testcase TC_S1AP_eNB_CMP_14() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_14());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_14
testcase TC_S1AP_eNB_CMP_15() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_15());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_15
testcase TC_S1AP_eNB_CMP_16() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_16());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_16
testcase TC_S1AP_eNB_CMP_17() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_17());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_17
testcase TC_S1AP_eNB_CMP_18() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_18());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_18
testcase TC_S1AP_eNB_CMP_19() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_CMP_19());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_CMP_19
} // End of group Context_Management_group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.6 NAS transport group
*/
group NAS_transport_group {
/**
* @desc Verify that the IUT can send an INITIAL_UE_MESSAGE to indicate the initiation of a NAS Transport procedure.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate the initiation of a NAS Transport procedure
* sends an INITIAL_UE_MESSAGE
* containing an eNB_UE_S1AP_ID
* containing a NAS-PDU
* containg a TAI
* containing a PLMN_Identity
* containing a TAC
* containing an E-UTRAN_CGI
* containing a PLMN_Identity
* containing a Cell_Identity
* containing a RRC_Establishment_Cause.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_NAS_01
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
* @reference ETSI TS 136 413 V13.4.0 Clause 8.6.2.1¶1 and 9.1.7.1
*/
testcase TC_S1AP_eNB_NAS_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_NAS_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_NAS_01
/**
* @desc Verify that the IUT can send an UPLINK_NAS_TRANSPORT to indicate an ongoing NAS Transport procedure.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an ongoing NAS Transport procedure
* sends an UPLINK_NAS_TRANSPORT
* containing an MME UE S1AP ID
* containing an eNB_UE_S1AP_ID
* containing a NAS-PDU
* containg a TAI
* containing a PLMN_Identity
* containing a TAC
* containing an E-UTRAN_CGI
* containing a PLMN_Identity
* containing a Cell_Identity
* containing a RRC_Establishment_Cause.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_NAS_02
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
* @reference ETSI TS 136 413 V13.4.0 Clause 8.6.2.3¶1 and 9.1.7.3
*/
testcase TC_S1AP_eNB_NAS_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_NAS_02());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_NAS_02
/**
* @desc Verify that the IUT can send a NAS_NON_DELIVERY_INDICATION to indicate the eNB was unable to ensure that the message has been received by the UE.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate a UE has not received a INITIAL_UE_MESSAGE
* sends a NAS_NON_DELIVERY_INDICATION
* containing an MME UE S1AP ID
* containing an eNB_UE_S1AP_ID
* containing a NAS-PDU
* containing a Cause
* indicating an appropriate cause value.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_NAS_03
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
* @reference ETSI TS 136 413 V13.4.0 Clause 8.6.2.4 and 9.1.7.4
*/
testcase TC_S1AP_eNB_NAS_03() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_NAS_03());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_NAS_03
} // End of group group NAS_transport_group
* @desc Management group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.7 Management group
*/
group Management_group {
/**
* @desc Verify that the IUT can successfully process all mandatory IEs in a RESET and sends a RESET_ACKNOWLEDGE due to a Reset procedure initiated from the MME.
* Ensure that the IUT
* on receipt of a RESET
* containing a Cause
* indicating an appropriate cause value
* containing a Reset_Type
* containing a S1_Interface
* indicating a value ‘Reset_all’
* sends a RESET_ACKNOWLEDGE
* containing a UE-associated_logical_S1-connection_list.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_MNP_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.1.2.1¶2 and 9.1.8.1 and 9.1.8.2
*/
testcase TC_S1AP_eNB_MNP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
/**
* @desc Verify that the IUT can send an RESET due to a Reset procedure initiated from the E-UTRAN.
* <pre>
* Ensure that the IUT
* to indicate a Reset procedure initiated from the E-UTRAN
* containing a Cause
* indicating an appropriate cause value
* containing a Reset_Type
* containing a S1_Interface
* indicating a value ‘Reset_all’.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_MNP_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.1.2.2¶1 and 9.1.8.1 and 9.1.8.2
*/
testcase TC_S1AP_eNB_MNP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
/**
* @desc Verify that the IUT can successfully manage Reset procedure in case of Abnormal Condition at the E-UTRAN.
* <pre>
* Ensure that the IUT
* on receipt of a RESET
* containing a Cause
* indicating an appropriate cause value
* containing a Reset_Type
* containing a Part_of_S1_interface
* indicating one empty ‘UE-associated_logical_S1-connection’
* sends a RESET_ACKNOWLEDGE
* containing a UE-associated_logical_S1-connection_list.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_MNP_03
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.1.2.2¶1 and 9.1.8.1 and 9.1.8.2
*/
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
testcase TC_S1AP_eNB_MNP_03() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_MNP_03());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_MNP_03
/**
* @desc Verify that the IUT can send an ERROR_INDICATION due to an Error Indication procedure.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an Error Indication procedure
* sends an ERROR_INDICATION
* (containing a Cause
* or containing a Criticality_Diagnostics).
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_MNP_04
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.2.2 and 9.1.8.3
*/
testcase TC_S1AP_eNB_MNP_04() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_MNP_04());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_MNP_04
/**
* @desc Verify that the IUT can send a S1_SETUP_REQUEST to indicate a S1 Setup procedure.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate a S1 Setup procedure
* sends a S1_SETUP_REQUEST
* containing a Global_eNB_ID
* containing a Supported_TAs
* containing a TAC
* containing a Default_Paging_DRX.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_MNP_05
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.3.2¶1 and 9.1.8.4 and 9.1.8.5
*/
testcase TC_S1AP_eNB_MNP_05() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
/**
* @desc Verify that the IUT can send an ENB_CONFIGURATION_UPDATE to indicate an eNB Configuration Update procedure.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an eNB Configuration Update procedure
* sends an ENB_CONFIGURATION_UPDATE
* containing a Global_eNB_ID
* containing a Supported_TAs
* containing a TAC.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_MNP_06
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.4.2¶1 and 9.1.8.7 and 9.1.8.8
*/
testcase TC_S1AP_eNB_MNP_06() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_MNP_06());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();