Newer
Older
} // End of testcase TC_S1AP_eNB_MNP_06
/**
* @desc Verify that the IUT can successfully process all mandatory IEs in an MME_CONFIGURATION_UPDATE and
* sends an MME_CONFIGURATION_UPDATE_ACKNOWLEDGE due to an MME Configuration Update procedure.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of an MME_CONFIGURATION_UPDATE
* may containing a Served_GUMMEIs
* may containing a Served_PLMNs
* sends an MME_CONFIGURATION_UPDATE_ACKNOWLEDGE.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_MNP_07
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.5.2¶1 and 9.1.8.10 and 9.1.8.11
*/
testcase TC_S1AP_eNB_MNP_07() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_MNP_07());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_MNP_07
/**
* @desc Verify that the IUT can successfully process all mandatory IEs in an MME_CONFIGURATION_UPDATE and
* sends an MME CONFIGURATION UPDATE_FAILURE due to an invalid MME Configuration Update procedure.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of an MME_CONFIGURATION_UPDATE
* containing a Broadcast_PLMNs
* indicating at least one unknown PLMN identity
* sends an MME_CONFIGURATION_UPDATE_FAILURE
* containing a Cause
* indicating an appropriate cause value.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_MNP_08
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
* @reference ETSI TS 136 413 V13.4.0 Clause 8.7.5.3 and 9.1.8.10 and 9.1.8.12
*/
testcase TC_S1AP_eNB_MNP_08() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_eNB_MNP_08());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_eNB_MNP_08
} // End of group Management_group
/**
* @desc S1 CDMA 2000 tunnelling group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.8 S1 CDMA 2000 tunnelling group group
*/
group S1_CDMA_2000_tunelling_group {
/**
* @desc Verify that the IUT can send a DOWNLINK_S1_CDMA2000_TUNNELLING.
* <pre>
* Ensure that the IUT
* to indicate a CDMA2000 to be forwarded
* sends an UPLINK_S1_CDMA2000_TUNNELLING
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a CDMA2000_RAT_Type
* containing a CDMA2000_Sector_ID
* containing a CDMA2000_PDU.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_STP_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.8.2.2¶1 and 9.1.9.2 and 9.2.1.23
*/
testcase TC_S1AP_eNB_STP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of group S1_CDMA_2000_tunelling_group
/**
* @desc UE capability info indication group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.9 UE capability info indication group
*/
group UE_capability_info_indication_group {
/**
* @desc Verify that the IUT can send a UE_CAPABILITY_INFO_INDICATION to indicate capability-related information update.
* <pre>
* Ensure that the IUT
* to indicate a capability-related information update
* sends an UE_CAPABILITY_INFO_INDICATION
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a containing a UE_Radio_Capability.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_UEC_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.9.2 and 9.1.10
*/
testcase TC_S1AP_eNB_UEC_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of group UE_capability_info_indication_group
/**
* @desc Trace Procedures group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.10 Trace group
*/
group Trace_group {
/**
* @desc Verify that the IUT can successfully send a TRACE_FAILURE_INDICATION on TRACE_START.
* <pre>
* Ensure that the IUT
* on receipt of a TRACE_START
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Trace_Activation
* containing an E-UTRAN_Trace_ID
* containing a Interfaces_To_Trace
* indicating value ‘S1-MME’
* containing a Trace_depth
* indicating value ‘maximum’
* containing a Trace_Collection_Entity_IP_Address
* not containing an MDT_Configuration
* sends TRACE_FAILURE_INDICATION
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-UTRAN_Trace_ID
* containing a Cause
* indicating an appropriate cause value.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_TRP_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.10.1.2-8 and 8.10.2.2 and 9.1.11.1 and 9.1.11.2
*/
testcase TC_S1AP_eNB_TRP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
/**
* @desc Verify that the IUT can successfully send a TRACE_FAILURE_INDICATION on DEACTIVATE_TRACE.
* <pre>
* Ensure that the IUT
* on receipt of a DEACTIVATE_TRACE
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Trace_Activation
* containing an E-UTRAN_Trace_ID
* sends TRACE_FAILURE_INDICATION
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-UTRAN_Trace_ID
* containing a Cause
* indicating an appropriate cause value.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_TRP_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.10.3.2-3 and 8.10.2.2 and 9.1.11.3 and 9.1.11.2
testcase TC_S1AP_eNB_TRP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
/**
* @desc Verify that the IUT can send a CELL_TRAFFIC_TRACE when the conditions required for tracing are met.
* <pre>
* Ensure that the IUT
* to indicate the conditions required for tracing are met
* sends CELL_TRAFFIC_TRACE
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-UTRAN_Trace_ID
* containing an E-UTRAN_CGI
* containing a PLMN_Identity
* containing a Cell_Identity
* containing a Trace_Collection_Entity_IP_Address.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_TRP_03
* @reference ETSI TS 136 413 V13.4.0 Clause 8.10.4.2 and 9.1.18
*/
testcase TC_S1AP_eNB_TRP_03() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
* @desc Location Reporting Procedures group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.11 Location reporting group
* @desc Verify that the IUT can process all mandatory IEs in a LOCATION_REPORTING_CONTROL containing Event Type IE indicating Directly and sends a LOCATION_REPORT.
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
* Ensure that the IUT
* on receipt of a LOCATION_REPORTING_CONTROL
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Request_Type
* containing an Event_Type
* indicating Directly
* containing a Report_Area
* indicating ECGI
* sends LOCATION_REPORT
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-UTRAN_CGI
* containing a PLMN_Identity
* containing a Cell_Identity
* containing a TAI
* containing a PLMN_Identity
* containing a TAC
* containing a Request_Type
* containing a Event_Type
* containing a Report_Area.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_LRP_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.11.1.2-2(1st dashed line) and 9.1.12.1 and 9.1.12.3 and 9.2.1.16,34,38
*/
testcase TC_S1AP_eNB_LRP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
* @desc Verify that the IUT can process all mandatory IEs in a LOCATION_REPORTING_CONTROL containing Event Type IE indicating Change of service cell and sends a LOCATION_REPORT.
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
* Ensure that the IUT
* on receipt of a LOCATION_REPORTING_CONTROL
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Request_Type
* containing an Event_Type
* indicating change_of_service_cell
* containing a Report_Area
* indicating ECGI
* when UE changes to new cell
* sends LOCATION_REPORT
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-UTRAN_CGI
* containing a PLMN_Identity
* containing a Cell_Identity
* containing a TAI
* containing a PLMN_Identity
* containing a TAC
* containing a Request_Type
* containing a Event_Type
* containing a Report_Area.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_LRP_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.11.1.2-2(1st dashed line) and 9.1.12.1 and 9.1.12.3 and 9.2.1.16,34,38
*/
testcase TC_S1AP_eNB_LRP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
* @desc Verify that the IUT can process all mandatory IEs in a LOCATION_REPORTING_CONTROL containing Event Type IE indicating Stop change of service cell and sends a LOCATION_REPORT.
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
* Ensure that the IUT
* on receipt of a LOCATION_REPORTING_CONTROL
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Request_Type
* containing an Event_Type
* indicating stop_change_of_service_cell
* containing a Report_Area
* indicating ECGI
* when UE changes to new cell
* sends LOCATION_REPORT
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an E-UTRAN_CGI
* containing a PLMN_Identity
* containing a Cell_Identity
* containing a TAI
* containing a PLMN_Identity
* containing a TAC
* containing a Request_Type
* containing a Event_Type
* containing a Report_Area.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_LRP_03
* @reference ETSI TS 136 413 V13.4.0 Clause 8.11.1.2-2(1st dashed line) and 9.1.12.1 and 9.1.12.3 and 9.2.1.16,34,38
*/
testcase TC_S1AP_eNB_LRP_03() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
/**
* @desc Verify that the IUT can send a LOCATION REPORT_FAILURE_INDICATION.
* <pre>
* Ensure that the IUT
* on receipt of a LOCATION_REPORTING_CONTROL
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Request_Type
* containing an Event_Type
* containing a Report_Area
* sends LOCATION REPORT_FAILURE_INDICATION
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Cause
* indicating an appropriate cause value.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_LRP_04
* @reference ETSI TS 136 413 V13.4.0 Clause 8.11.2.2-1 and 9.1.12.2
*/
testcase TC_S1AP_eNB_LRP_04() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of group Location_reporting_group
/**
* @desc Warning message transmission group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.12 Warning message transmission group
*/
group Warning_message_transmission_group {
/**
* @desc Verify that the IUT can successfully process all mandatory IEs in a WRITE-REPLACE_WARNING_REQUEST received and sends a WRITE-REPLACE_WARNING_RESPONSE.
* Ensure that the IUT
* on receipt of an WRITE-REPLACE_WARNING_REQUEST
* containing a Message_Identifier
* containing a Serial_Number
* containing a Repetition Period
* containing an Number_of_Broadcasts_Requested
* sends an WRITE-REPLACE_WARNING_RESPONSE
* containing a Serial_Number.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_WTP_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.12.1.2-1 and 9.1.13.1 and 9.1.13.2
*/
testcase TC_S1AP_eNB_WTP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
* @desc Verify that the IUT can successfully process all mandatory IEs in an KILL_REQUEST received and sends a KILL_RESPONSE.
* Ensure that the IUT
* on receipt of a KILL_REQUEST
* containing a Message_Identifier
* containing a Serial_Number
* sends sends a KILL_RESPONSE
* containing a Message_Identifier
* containing a Serial_Number.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_WTP_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.12.2.2-1,3 and 9.1.13.3 and 9.1.13.4
*/
testcase TC_S1AP_eNB_WTP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
/**
* @desc Verify that the IUT can send a PWS_RESTART_INDICATION to indicate a PWS Restart Indication procedure.
* <pre>
* Ensure that the IUT
* to indicate a PWS Restart Indication procedure
* sends a PWS_RESTART_INDICATION
* containing an E-CGI_List_for_Restart
* indicating a valid list of E-CGI
* containing a TAI_List_for_Restart
* indicating a valid list of eNB identifier
* containing an Emergency_Area_ID_List_for_Restart
* indicating an empty list.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_WTP_03
* @reference ETSI TS 136 413 V13.4.0 Clause 8.12.3.2 and 9.1.13.5
*/
testcase TC_S1AP_eNB_WTP_03() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
/**
* @desc Verify that the IUT can send a PWS_FAILURE_INDICATION to indicate PWS Failure Indication procedure.
* <pre>
* Ensure that the IUT
* to indicate a PWS Failure Indication procedure
* sends a PWS_FAILURE_INDICATION
* containing an PWS failed E-CGI List
* indicating a valid list of E-CGI
* @see ETSI TS 103 497-2 TP_S1AP_eNB_WTP_04
* @reference ETSI TS 136 413 V13.4.0 Clause 8.12.4.2 and 9.1.13.6
*/
testcase TC_S1AP_eNB_WTP_04() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of group Warning_message_transmission_group
/**
* @desc eNB direct information transfer group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.13 eNB direct information transfer group
*/
group ENB_direct_information_transfer_group {
/**
* @desc Verify that the IUT can send an eNB_DIRECT_INFORMATION_TRANSFER to indicate an eNB Direct Information Transfer procedure.
* <pre>
* Ensure that the IUT
* to indicate an eNB direct information Transfer procedure,
* sends an eNB_DIRECT_INFORMATION_TRANSFER
* containing an Inter-system_Information_Transfer_Type
* containing a RIM
* containing a RIM_Transfer
* containing a RIM_Information
* containing a RIM_Routing_Address.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_EIT_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.13.2.1 and 9.1.14 and 9.2.3.23
*/
testcase TC_S1AP_eNB_EIT_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component direct information
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of group ENB_direct_information_transfer_group
/**
* @desc eNB configuration transfer group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.15 eNB configuration transfer group
*/
group ENB_configuration_transfer_group {
/**
* @desc Verify that the IUT can send an eNB_CONFIGURATION_TRANSFER to indicate an eNB Configuration Transfer procedure.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate an eNB Configuration Transfer procedure,
* sends an eNB_CONFIGURATION_TRANSFER
* containing a SON_Configuration_Transfer
* containing a Target_eNB-ID
* containing a Source_eNB-ID
* containing a SON_Information.
* containing a SON_Information_Request
* indicating X2TNL_Configuration_Info
* containing an X2_TNL_Configuration_Info.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_ECT_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.15.2.1 and 9.1.16
*/
testcase TC_S1AP_eNB_ECT_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of group ENB_configuration_transfer_group
/**
* @desc LPPa transport group
* @see ETSI TS 103 497-2 Clause 5.2.2.1.17 LPPa transport group
*/
group LPPa_transport_group {
/**
* @desc Verify that the IUT can send a UPLINK_UE_ASSOCIATED_LPPA_TRANSPORT to indicate a LPPa Transport procedure
* using a UE associated signalling.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate a LPPa Transport procedure using a UE associated signalling,
* sends a UPLINK_UE_ASSOCIATED_LPPA_TRANSPORT
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Routing_ID
* indicating a valid routing identifier value
* containing an LPPa-PDU.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_LPP_01
* @reference ETSI TS 136 413 V13.4.0 Clause 8.17.2.2 and 9.1.19.2
*/
testcase TC_S1AP_eNB_LPP_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
/**
* @desc Verify that the IUT can send a UPLINK_UE_ASSOCIATED_LPPA_TRANSPORT to indicate a LPPa Transport procedure
* using a Non-UE associated signalling.
* <pre>
* Configuration: CF_S1-MME
* Ensure that the IUT
* to indicate a LPPa Transport procedure using a UE associated signalling,
* sends a UPLINK_UE_ASSOCIATED_LPPA_TRANSPORT
* containing an MME_UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a Routing_ID
* indicating a valid routing identifier value
* containing an LPPa-PDU.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_eNB_LPP_02
* @reference ETSI TS 136 413 V13.4.0 Clause 8.17.2.4 and 9.1.19.4
*/
testcase TC_S1AP_eNB_LPP_02() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not PICS_S1AP_eNB_IUT) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of group LPPa_transport_group
/**
* @desc Unknown, Unforseen and Erroneous Protocol Data
* @see ETSI TS 103 497-2 Clause 5.2.2.2.18 Unknown, Unforseen and Erroneous Protocol Data
*/
group Unknown_unforseen_errorneous_group {
/**
* @desc Verify that the IUT rejects the procedure using Error Indication Procedure if message contains different types of received
* criticality information of the Procedure Code IE and include Procedure Code IE, Triggering Message IE and
* Procedure Criticality IE in the Criticality Diagnostics IE within ERROR_INDICATION.
* <pre>
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of an INITIAL_CONTEXT_SETUP_REQUEST,
* with Criticality set to value from the Table 4
* containing an MME UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing a UE_Aggregate_Maximum_Bit_Rate
* containing an E-RAB_to_be_Setup_List
* containing an E-RAB_to_be_Setup Item 1
* containing an E-RAB_ID
* containing an E-RAB_Level_QoS_Parameters
* containing a Transport_Layer_Address
* containing a GTP-TEID
* containing a NAS-PDU
* containing a UE_Security_Capabilities
* containing an Encription_Algorithms
* indicating not supported algoithm
* containing an Integrity_Protection_Algorithms
* containing a Security_Key
* sends an ERROR_INDICATION
* containing a Criticality_Diagnostics
* containing a Procedure_Code
* containing a Triggering_Message
* containing a Procedure_Criticality.
* </pre>
*
* @see ETSI TS 103 497-2 TP_S1AP_ENB_ERR_01
* @reference ETSI TS 136 413 V13.4.0 Clause 10.3.4.1¶8
*/
testcase TC_S1AP_ENB_ERR_01() runs on S1AP system TestAdapter {
// Local variables
var S1AP v_s1ap_enb;
// Test control
if (not (PICS_S1AP_eNB_IUT and PICS_S1AP_eNB_INITIATION_ERROR_IND_ABSTRACT_SYNTAX_PROCEDURE)) {
log("*** " & __SCOPE__ & ": ERROR: 'PICS_S1AP_eNB_IUT and PICS_S1AP_eNB_INITIATION_ERROR_IND_ABSTRACT_SYNTAX_PROCEDURE' shall be set to true for executing the TC. ***");
stop;
}
// Test component configuration
f_cf_S1AP_eNB_Up(v_s1ap_enb);
// Start
v_s1ap_enb.start(f_TC_S1AP_ENB_ERR_01());
// synchronize PTC on 1 sychronization points
f_serverSyncNClientsAndStop(1, {c_prDone, c_tbDone, c_poDone});
f_cf_Down();
} // End of testcase TC_S1AP_ENB_ERR_01
/**
* @desc Verify that the IUT rejects the procedure if message contains not comprehended IEs/IE groups marked with
* ‘Reject IE’ or ‘Ignore IE and Notify Sender’ and include Information Element Criticality Diagnostics IE in
* the Criticality Diagnostics IE for each reported IEs/IE groups within response message for this procedure.
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
* Configuration: CF_S1-MME
* Ensure that the IUT
* on receipt of an INITIAL_CONTEXT_SETUP_REQUEST,
* with Criticality set to value from the Table 4
* containing an MME UE_S1AP_ID
* containing an eNB_UE_S1AP_ID
* containing an Unknown_ID
* containing Criticality
* indicating Reject or Ignore and Notify Sender
* containing a UE_Aggregate_Maximum_Bit_Rate
* containing an E-RAB_to_be_Setup_List
* containing an E-RAB_to_be_Setup Item 1
* containing an E-RAB_ID
* containing an E-RAB_Level_QoS_Parameters
* containing a Transport_Layer_Address
* containing a GTP-TEID
* containing a NAS-PDU
* containing a UE_Security_Capabilities
* containing an Encription_Algorithms
* indicating not supported algoithm
* containing an Integrity_Protection_Algorithms
* containing a Security_Key