In most cases we expect that people will be using shared libraries not
static ones, therefore we make that the default.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Travis identified a problem with freeing the ex_data locks which wasn't
quite right in ff234405

. Trying to fix it identified a further problem:
the ex_data locks are cleaned up by OPENSSL_cleanup(), which is called
explicitly by CRYPTO_mem_leaks(), but then later the BIO passed to
CRYPTO_mem_leaks() is freed. An attempt is then made to use the ex_data
lock already freed.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

no-stdio does not work with the apps. Since the tests also need the apps
it doesn't support that either. Therefore we disable building of both.

no-autoalginit is not compatible with the apps because it requires explicit
loading of the algorithms, and the apps don't do that. Therefore we disable
building the apps for this option. Similarly the tests depend on the apps
so we also disable the tests. Finally the whole point about no-autoalginit
is to avoid excessive executable sizes when doing static linking. Therefore
we disable "shared" if this option is selected.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Running a "make update" wanted to add err_cleanup to libcrypto.num which
is wrong.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Some locks were not being properly cleaned up during close down.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

During Configure we attempt to check the kernel version of this platform
to see whether we can compile the AFALG engine. If the kernel version
looks recent enough then we enable AFALG. However when we compile
e_afalg.c we check the version of the linux headers. If there is a
mismatch between the linux headers and the currently running kernel then
we don't compile the AFLAG engine and continue. This was causing a link
error.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Introduced in:

    commit 79c7f74d
    Author: Ben Laurie <ben@links.org>
    Date:   Tue Mar 29 19:37:57 2016 +0100

    Fix buffer overrun in ASN1_parse().

Problem input:

    https://tools.ietf.org/html/draft-ietf-curdle-pkix-eddsa-00#section-8.1


    -----BEGIN PUBLIC KEY-----
    MC0wCAYDK2VkCgECAyEAGb9ECWmEzf6FQbrBZ9w7lshQhqowtrbLDFw4rXAxZuE=
    -----END PUBLIC KEY-----

Previously:

        0:d=0  hl=2 l=  45 cons: SEQUENCE
        2:d=1  hl=2 l=   8 cons: SEQUENCE
        4:d=2  hl=2 l=   3 prim: OBJECT            :1.3.101.100
        9:d=2  hl=2 l=   1 prim: ENUMERATED        :02
    Error in encoding
    140735164989440:error:0D07207B:asn1 encoding routines:ASN1_get_object:header too long:../openssl/crypto/asn1/asn1_lib.c:148:

Now:

    0:d=0  hl=2 l=  45 cons: SEQUENCE
    2:d=1  hl=2 l=   8 cons: SEQUENCE
    4:d=2  hl=2 l=   3 prim: OBJECT            :1.3.101.100
    9:d=2  hl=2 l=   1 prim: ENUMERATED        :02
   12:d=1  hl=2 l=  33 prim: BIT STRING
      0000 - 00 19 bf 44 09 69 84 cd-fe 85 41 ba c1 67 dc 3b   ...D.i....A..g.;
      0010 - 96 c8 50 86 aa 30 b6 b6-cb 0c 5c 38 ad 70 31 66   ..P..0....\8.p1f
      0020 - e1                                                .

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Document removal of no-aes, no-hmac, no-rsa, no-sha and no-md5.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update the config options documentation based on feedback.

Reviewed-by: Richard Levitte <levitte@openssl.org>

There were a lot of options missing from INSTALL. This adds descriptions
for them.

Reviewed-by: Richard Levitte <levitte@openssl.org>

no-hmac is no longer an option so remove OPENSSL_NO_HMAC guards.

Reviewed-by: Richard Levitte <levitte@openssl.org>

no-sha is no longer an option so remove OPENSSL_NO_SHA guards.

Reviewed-by: Richard Levitte <levitte@openssl.org>

no-aes is no longer a Configure option and therefore the OPENSSL_NO_AES
guards can be removed.

Reviewed-by: Richard Levitte <levitte@openssl.org>

These algorithms are fundamental and extensively used. The "no-" options
do not work either in 1.1.0 or in other released branches. Therefore the
ability to disable them should be removed.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

The check_defer() function was used to ensure that EVP_cleanup() was always
called before OBJ_cleanup(). The new cleanup code ensures this so it is
no longer needed.

Remove obj_cleanup() call in OID config module: it is not needed
any more either.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Don't expose purely libcrypto internal symbols, even to libssl.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

When compressing, the output / input is a binary format, not a text
format like BASE64.  This is important on Windows, where a ^Z in a
text file is seen as EOF, and there could be a ^Z somewhere in a
compressed file, cutting it short as input.

Reviewed-by: Matt Caswell <matt@openssl.org>

The handling was Unix centric, already in Configure.  Change that to
just collect the value and let the build file templates figure out
what to do with it.

Reviewed-by: Matt Caswell <matt@openssl.org>

Instead of absolute hard coding of the libz library name, have it use
the macro LIBZ, which is set to defaults we know in case it's
undefined.

This allows our configuration to set something that's sane on current
or older platforms, and allows the user to override it by defining
LIBZ themselves.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

The macros ZLIB and ZLIB_SHARED weren't appropriately defined,
deviating wrongly from how they worked in earlier OpenSSL versions.
So, restore it so that ZLIB is defined if configured "enable-zlib" and
so that ZLIB and ZLIB_SHARED are defined if configured
"enable-zlib-dynamic".

Additionally, correct the interpretation of the --with-zlib-lib value
on Windows and VMS, where it's used to indicate the actual zlib
zlib library file / logical name, as that can differ depending on zlib
version and packaging on those platforms.

Finally for Windows and VMS, we also define the macro LIBZ with that
file name / logical name when configured "zlib-dynamic", so the
compression unit can pick it up and use it.

Reviewed-by: Matt Caswell <matt@openssl.org>

The above config options were failing in test_ssl_old.

Reviewed-by: Richard Levitte <levitte@openssl.org>

There is a preference for suffixes to indicate that a function is internal
rather than prefixes. Note: the suffix is only required to disambiguate
internal functions and public symbols with the same name (but different
case)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Tweak to documentation following feedback

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Documentation fix ups as a result of feedback received.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

The no-op de-init macros may fail because of extraneous ";", so we use
a slightly different construct instead.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>