- Aug 01, 2018
-
-
Andy Polyakov authored
Note that exported functions maintain original behaviour, so that external callers won't observe difference. While internally we can now perform Montogomery multiplication on fixed-length vectors, fixed at modulus size. The new functions, bn_to_mont_fixed_top and bn_mul_mont_fixed_top, are declared in bn_int.h, because one can use them even outside bn, e.g. in RSA, DSA, ECDSA... Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6810) (cherry picked from commit 71883868) Resolved conflicts: crypto/bn/bn_exp.c crypto/bn/bn_lcl.h crypto/bn/bn_mont.c crypto/include/internal/bn_int.h
-
Andy Polyakov authored
The new flag marks vectors that were not treated with bn_correct_top, in other words such vectors are permitted to be zero padded. For now it's BN_DEBUG-only flag, as initial use case for zero-padded vectors would be controlled Montgomery multiplication/exponentiation, not general purpose. For general purpose use another type might be more appropriate. Advantage of this suggestion is that it's possible to back-port it... bn/bn_div.c: fix memory sanitizer problem. bn/bn_sqr.c: harmonize with BN_mul. Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
Trouble is that addition is postponing expansion till carry is calculated, and if addition carries, top word can be zero, which triggers assertion in bn_check_top. Reviewed-by:
-
- Jul 26, 2018
-
-
Kurt Roeckx authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> GH: #6794 (cherry picked from commit b9e54e98)
-
Kurt Roeckx authored
The old numbers where all generated for an 80 bit security level. But the number should depend on security level you want to reach. For bigger primes we want a higher security level and so need to do more tests. Reviewed-by:
Richard Levitte <levitte@openssl.org> Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> GH: #6075 Fixes: #6012 (cherry picked from commit feac7a1c)
-
Kurt Roeckx authored
This changes the security level from 100 to 128 bit. We only have 1 define, this sets it to the highest level supported for DSA, and needed for keys larger than 3072 bit. Reviewed-by:
-
- Jul 25, 2018
-
-
Rich Salz authored
Thanks to Jiecheng Wu, Zuxing Gu for the report. Reviewed-by:
Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6791) (cherry picked from commit 037241bf) (Only the EC part)
-
- Jul 23, 2018
-
-
Andy Polyakov authored
ecp_nistz256_set_from_affine is called when application attempts to use custom generator, i.e. rarely. Even though it was wrong, it didn't affect point operations, they were just not as fast as expected. Reviewed-by:
-
- Jul 22, 2018
-
-
Richard Levitte authored
As per RFC 7292. Fixes #6665 Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/6708) (cherry picked from commit b709babb)
-
- Jul 13, 2018
-
-
Alexandre Perrin authored
Change the description for BN_hex2bn() so that it uses the same BIGNUM argument name as its prototype. CLA: trivial Reviewed-by:
-
- Jul 03, 2018
-
-
Matt Caswell authored
We should validate that the various fields we put into the CertificateRequest are not too long. Otherwise we will construct an invalid message. Fixes #6609 Reviewed-by:
-
- Jun 28, 2018
-
-
Rich Salz authored
Fixes uninitialized memory read reported by Nick Mathewson Reviewed-by:
-
- Jun 25, 2018
-
-
Bernd Edlinger authored
Reviewed-by:
-
- Jun 24, 2018
-
-
Bernd Edlinger authored
Reviewed-by:
-
- Jun 21, 2018
-
-
Nick Mathewson authored
Also, modernize the code, so that it isn't trying to store a size_t into an int, and then check the int's sign. :/ Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Nick Mathewson authored
In previous versions of OpenSSL, the documentation for PEM_read_* said: The callback B<must> return the number of characters in the passphrase or 0 if an error occurred. But since c82c3462 , 0 is now treated as a non-error return value. Applications that want to indicate an error need to return -1 instead. Reviewed-by:
-
Matt Caswell authored
This extends the recently added ECDSA signature blinding to blind DSA too. This is based on side channel attacks demonstrated by Keegan Ryan (NCC Group) for ECDSA which are likely to be able to be applied to DSA. Normally, as in ECDSA, during signing the signer calculates: s:= k^-1 * (m + r * priv_key) mod order In ECDSA, the addition operation above provides a sufficient signal for a flush+reload attack to derive the private key given sufficient signature operations. As a mitigation (based on a suggestion from Keegan) we add blinding to the operation so that: s := k^-1 * blind^-1 (blind * m + blind * r * priv_key) mod order Since this attack is a localhost side channel only no CVE is assigned. This commit also tweaks the previous ECDSA blinding so that blinding is only removed at the last possible step. Reviewed-by:
-
- Jun 19, 2018
-
-
Matt Caswell authored
Fixes #5322 Reviewed-by:
-
- Jun 18, 2018
-
-
Andy Polyakov authored
Reviewed-by:
-
Andy Polyakov authored
Reviewed-by:
-
Nicola Tuveri authored
Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6465)
-
- Jun 13, 2018
-
-
Matt Caswell authored
Keegan Ryan (NCC Group) has demonstrated a side channel attack on an ECDSA signature operation. During signing the signer calculates: s:= k^-1 * (m + r * priv_key) mod order The addition operation above provides a sufficient signal for a flush+reload attack to derive the private key given sufficient signature operations. As a mitigation (based on a suggestion from Keegan) we add blinding to the operation so that: s := k^-1 * blind^-1 (blind * m + blind * r * priv_key) mod order Since this attack is a localhost side channel only no CVE is assigned. Reviewed-by:
-
- Jun 12, 2018
-
-
Guido Vranken authored
CVE-2018-0732 Signed-off-by:
Guido Vranken <guidovranken@gmail.com> (cherry picked from commit 91f7361f ) Reviewed-by:
-
- Jun 09, 2018
-
-
Andy Polyakov authored
This module is used only with odd input lengths, i.e. not used in normal PKI cases, on contemporary processors. The problem was "illuminated" by fuzzing tests. Reviewed-by:
-
- Jun 02, 2018
-
-
Ken Goldman authored
ECDSA_SIG_new() returns NULL on error. Reviewed-by:
-
- May 31, 2018
-
-
Richard Levitte authored
Just because an engine implements algorithm methods, that doesn't mean it also implements the ASN1 method. Therefore, be careful when looking for an ASN1 method among all engines, don't try to use one that doesn't exist. Fixes #6381 Reviewed-by:
-
Richard Levitte authored
XN_FLAG_COMPAT has a unique property, its zero for value. This means it needs special treatment; if it has been set (which can only be determined indirectly) and set alone (*), no other flags should be set. (*) if any other nameopt flag has been set by the user, compatibility mode is blown away. Reviewed-by:
-
- May 29, 2018
-
-
Matt Caswell authored
Thanks to Guido Vranken and OSSFuzz for finding this issue. Reviewed-by:
-
- May 23, 2018
-
-
Matt Caswell authored
The variable in question can never be used uninitialised, but we silence the compiler anyway. Fixes #6301 Reviewed-by:
-
- May 21, 2018
-
-
Matt Caswell authored
If the lengths of both names is 0 then don't attempt to do a memcmp. Issue reported by Simon Friedberger, Robert Merget and Juraj Somorovsky. Reviewed-by:
-
- May 18, 2018
-
-
Andy Polyakov authored
Configure detects if compiler can generate dependency lists for any command name, while this script didn't quite tolerate arbitrary one. Reviewed-by:
-
- May 17, 2018
-
-
Matt Caswell authored
Experiments have shown that the lookup table used by BN_GF2m_mod_arr introduces sufficient timing signal to recover the private key for an attacker with access to cache timing information on the victim's host. This only affects binary curves (which are less frequently used). No CVE is considered necessary for this issue. The fix is to replace the lookup table with an on-the-fly calculation of the value from the table instead, which can be performed in constant time. Thanks to Youngjoo Shin for reporting this issue. Reviewed-by:
-
- May 14, 2018
-
-
Richard Levitte authored
Fixes #6241 Reviewed-by:
-
Richard Levitte authored
The Console UI method always set echo on after prompting without echo. However, echo might not have been on originally, so just restore the original TTY settings. Fixes #2373 Reviewed-by:
-
- May 12, 2018
-
-
Pavel Kopyl authored
(cherry picked from commit aebd0e5c ) Reviewed-by:
-
Matt Caswell authored
In DTLS if we have buffered a fragment for a zero length message (e.g. ServerHelloDone) then, when we unbuffered the fragment, we were attempting to memcpy the contents of the fragment which is zero length and a NULL pointer. This is undefined behaviour. We should check first whether we have a zero length fragment. Fixes a travis issue. [extended tests] Reviewed-by:
-
Richard Levitte authored
Fixes #4716 Reviewed-by:
-
- May 11, 2018
-
-
Dr. Matthias St. Pierre authored
Reviewed-by:
-
