As noted already, some platforms don't fill in ai_protocol as
expected.  To circumvent that, we have BIO_ADDRINFO_protocol() to
compute a sensible answer in that case.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Error codes are printed in hex, and previous OpenSSL versions expected
the error codes to be provided to errstr in hex. In 1.1.0, for some
reason, it was expecting them to be decimal.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

If asn1parse doesn't like a structure print out the content octets
for diagnostic purposes.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The functions that have been deprecated by the auto init changes are
now guarded with deprecation checks, so it's fairly easy to see if
they can be used.

In test/dtlsv1listentest, we simply remove all init and cleanup code,
as they are call automatically when needed.

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Because some platforms won't will in any value in ai_protocol, there's
no point using it if we already know what it should be.

Reviewed-by: Rich Salz <rsalz@openssl.org>

It seems that some platforms' getaddrinfo don't fill in the
ai_protocol field properly.  On those, the assertion
'protocol == BIO_ADDRINFO_protocol(res)' will fail.  Best to remove
it.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Update ciphers documentation as well (based on -04 rev of ID).

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>

RT: #4206, GH: #642

Signed-off-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>

GH: #630

Reviewed-by: Rich Salz <rsalz@openssl.org>

Because ENGINESDIR and OPENSSLDIR typically contains backslashes, they
need to be escaped just right.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Because the command line definitions of OPENSSLDIR and ENGINESDIR
contain quotes, we need a variant of CFLAG where backslashes and
quotes are escaped when we produce buildinf.h

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Have apps/openssl display the result along with OPENSSLDIR

As part of this, add ENGINESDIR in util/mk1mf.pl

Reviewed-by: Rich Salz <rsalz@openssl.org>

Attempting to init after deinit is an error. Update the documentation
accordingly.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

If init failed we'd like to set an error code to indicate that. But if
init failed then when the error system tries to load its strings its going
to fail again. We could get into an infinite loop. Therefore we just set
a single error the first time around. After that no error is set.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The new init functions can fail if the library has already been stopped. We
should be able to indicate failure with a 0 return value.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The local variable tmp was declared static when it shouldn't be. This
is in the no-threads implementation, and it was immediately initialised
to something else on every invokation of the function so it doesn't break
anything...but still shouldn't be there.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Make these more correct, concise and less tautological.

Reviewed-by: Stephen Henson <steve@openssl.org>

This was a developer debugging feature and was never a useful public
interface.

Added all missing X509 error codes to the verify(1) manpage, but
many still need a description beyond the associated text string.

Sorted the errors in x509_txt.c by error number.

Reviewed-by: Stephen Henson <steve@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Man, there were a lot of renamings :)

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

There is more to be added, but this will at least tell people how to try.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The old building scripts get removed, they are hopelessly gone in bit
rot by now.

Also remove the old symbol hacks.  They were needed needed to shorten
some names to 31 characters, and to resolve other symbol clashes.
Because we now compile with /NAMES=(AS_IS,SHORTENED), this is no
longer required.

Reviewed-by: Rich Salz <rsalz@openssl.org>

As part of this, change util/mkdef.pl to stop adding libraries to
depend on in its output.  mkdef.pl should ONLY output a symbol
vector.

Because symbol names can't be longer than 31 characters, we use the
compiler to shorten those that are longer down to 23 characters plus
an 8 character CRC.  To make sure users of our header files will pick
up on that automatically, add the DEC C supported extra headers files
__decc_include_prologue.h and __decc_include_epilogue.h.

Furthermore, we add a config.com, so VMS people can configure just as
comfortably as any Unix folks, thusly:

    @config

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

This commit SHALL be reverted before final release.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Cygwin and Mingw name their libraries a bit differently from the rest
of the POSIXly universe, we need to adapt to that.

In Makefile.tmpl, it means that some hunks will only be output
conditionally.

This also means that shared_extension for the Cygwin and Mingw
configurations in Configurations/10-main.conf are changing from .dll.a
to .dll.  Makefile.shared does a fine job without having them
specified, and it's much easier to work with tucking an extra .a at
the end of files in the installation recipes than any amount of name
rewrites, especially with the support of the SHARED_NAME in the top
build.info.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This also adds all the raw sections needed for some files.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Under certain conditions, one might not want to output certain
sections of a template file.  This adds the functions output_off() and
output_on(), reachable inside the templates.  And example usage in a
Makefile template could be this:

	@ : {- output_off() if $config{no_shared}; "" -}
	... lines dealing with shared libraries
	@ : {- output_on() -}

Reviewed-by: Rich Salz <rsalz@openssl.org>

The logic to figure out the combinations of --prefix and --openssldir
has stayed in Configure so far, with Unix paths as defaults.

However, since we're making Configure increasingly platform agnostic,
these defaults need to change and adapt to the platform, along with
the logic to combine them.

The easiest to provide for this is to move the logic and the defaults
away from Configure and into the build files.

This also means that the definition of the macros ENGINESDIR and
OPENSSLDIR move away from include/openssl/opensslconf.h and into the
build files.

Makefile.in is adapted accordingly.

Reviewed-by: Rich Salz <rsalz@openssl.org>

With some compilers, C macros are defined differently on the command
line than on Unix.  It could be that the flad to define them isn't -D,
it could also be that they need to be grouped together and not be mixed
in with the other compiler flags (that's how it's done on VMS, for
example).

On Unix family platform configurations, we can continue to have macro
definitions mixed in with the rest of the flags, so the changes in
Configurations/*.conf are kept to an absolute minimum.

Reviewed-by: Rich Salz <rsalz@openssl.org>