- 29 Jan, 2018 4 commits
-
-
Benjamin Kaduk authored
The cryptodev engine is only available for OpenBSD and FreeBSD, but for the OS version-specific checks the OpenBSD macro is not defined on FreeBSD. When building with -Werror and -Wundef (enabled by strict-warnings), the FreeBSD build fails: crypto/engine/eng_cryptodev.c:47:7: error: 'OpenBSD' is not defined, evaluates to 0 [-Werror,-Wundef] \# if (OpenBSD >= 200112) || ((__FreeBSD_version >= 470101 && \# __FreeBSD_versi... ^ The reverse case would be true on OpenBSD (__FreeBSD_version would not be defined), but since the boolean will short-circuit and this code is only executed on OpenBSD and FreeBSD, and the line is already pretty long, leave that out for now. Reviewed-by:Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5160)
-
Richard Levitte authored
It's already in opensslconf.h, which is included where this is relevant. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5188) (cherry picked from commit 711a8b99)
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
The rehash test broke the test if run by root. Instead, just skip the check that requires non-root to be worth it. Fixes #4387 Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5184) (cherry picked from commit 98ade242)
-
- 28 Jan, 2018 1 commit
-
-
Richard Levitte authored
Most of all, this change preserves casing a bit better Reviewed-by:
-
- 26 Jan, 2018 1 commit
-
-
Bernd Edlinger authored
Reviewed-by:
-
- 25 Jan, 2018 3 commits
-
-
Rich Salz authored
Backport of https://github.com/openssl/openssl/pull/4201 Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/5162)
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
- 24 Jan, 2018 6 commits
-
-
Rich Salz authored
Backport from https://github.com/openssl/openssl/pull/5141 Reviewed-by:
Viktor Dukhovni <viktor@openssl.org> Reviewed-by:
-
Christian Heimes authored
The getters for min and max proto version wrongly passed NULL instead of 0 as third argument to SSL_ctrl() and SSL_CTX_ctrl(). The third argument is not used, but the error results in a compiler warning: warning: passing argument 3 of ‘SSL_CTX_ctrl’ makes integer from pointer without a cast [-Wint-conversion] int v = SSL_CTX_get_max_proto_version(self->ctx); See https://github.com/openssl/openssl/pull/4364 Signed-off-by:
Christian Heimes <christian@python.org> Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> Reviewed-by:
Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/5128) (cherry picked from commit 1f82eba7)
-
Steffan Karger authored
When using the SSL_CTX_get_min_min_version macro while compiling with -Wall, my compiler rightfully complains about this construction: warning: passing argument 3 of ‘SSL_CTX_ctrl’ makes integer from pointer without a cast [-Wint-conversion] These macro's should use 0, instead of NULL, for the third argument, like most other SSL_CTX_ctrl 'get' wrappers do. CLA: trivial Signed-off-by:
Steffan Karger <steffan.karger@fox-it.com> Reviewed-by:
-
Todd Short authored
Reviewed-by:
-
Richard Levitte authored
We incorrectly assumed that explicit dependencies meant that the source directory would be added for inclusion. However, if the dependent file is generated, it's stored in the build directory, and that should be used for inclusion rather than the source directory. Reviewed-by:
-
Richard Levitte authored
This ensures that only one set of includes is associated with each object file, reagardless of where it's used. For example, if apps/build.info has this: SOURCE[openssl]=foo.c INCLUDE[openssl]=.. ../include and test/build.info has this: SOURCE[footest]=../apps/foo.c INCLUDE[footest]=../include The inclusion directories used for apps/foo.o would differ depending on which program's dependencies get generated first in the build file. With this change, all those INCLUDEs get combined into one set of inclusion directories tied to the object file. Reviewed-by:
-
- 23 Jan, 2018 4 commits
-
-
Richard Levitte authored
EVP_PKEY_asn1_find_str() would search through standard asn1 methods first, then those added by the application, which EVP_PKEY_asn1_find() worked the other way around. Also, EVP_PKEY_asn1_find_str() didn't handle aliases. This change brings EVP_PKEY_asn1_find_str() closer to EVP_PKEY_asn1_find(). Fixes #5086 Reviewed-by:
-
Richard Levitte authored
This reverts commit d85722d3 . Reviewed-by:
-
Richard Levitte authored
Since libssl requires libcrypto and libcrypto.pc already has Libs.private set exactly the same, there's no reason to repeat it in libssl.pc. Reviewed-by:
-
Richard Levitte authored
Even -pthread gets treated that way. The reason to do this is so it ends up in 'Libs.private' in libcrypto.pc. Fixes #3884 Reviewed-by:
-
- 22 Jan, 2018 3 commits
-
-
Matt Caswell authored
Fixes #5090 Reviewed-by:
-
Matt Caswell authored
An index.txt entry which has an empty Subject name field will cause ca to crash. Therefore check it when we load it to make sure its not empty. Fixes #5109 Reviewed-by:
-
Matt Caswell authored
Misconfiguration (e.g. an empty policy section in the config file) can lead to an empty Subject. Since certificates should have unique Subjects this should not be allowed. Reviewed-by:
-
- 21 Jan, 2018 2 commits
-
-
Bernd Edlinger authored
./config -DOPENSSL_NO_SECURE_MEMORY Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
- 20 Jan, 2018 1 commit
-
-
Richard Levitte authored
Reviewed-by:
-
- 19 Jan, 2018 2 commits
-
-
Bernd Edlinger authored
Reviewed-by:
-
Richard Levitte authored
On Windows, we sometimes see a behavior with SO_REUSEADDR where there remains lingering listening sockets on the same address and port as a newly created one. To avoid this scenario, we don't create a new proxy port for each new client run. Instead, we create one proxy socket when the proxy object is created, and close it when destroying that object. Reviewed-by:
-
- 18 Jan, 2018 5 commits
-
-
Richard Levitte authored
Reviewed-by:
Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5060) (cherry picked from commit e44c7d02)
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Because OPENSSL_SYS_CYGWIN will keep OPENSSL_SYS_UNIX defined, there's no point having checks of this form: #if (defined(OPENSSL_SYS_UNIX) || defined(OPENSSL_SYS_CYGWIN)) Reviewed-by: -
Richard Levitte authored
More to the point, Cygwin is a POSIX API. In our library, the use of a POSIX API is marked by defining the macro OPENSSL_SYS_UNIX. Therefore, that macro shouldn't be undefined when building for Cygwin. Reviewed-by:
-
Richard Levitte authored
On Windows, we sometimes see a behavior with SO_REUSEADDR where there remains lingering listening sockets on the same address and port as a newly created one. An easy solution is not to use ReuseAddr on Windows. Thanks Bernd Edlinger for the suggestion. Reviewed-by:
-
- 17 Jan, 2018 2 commits
-
-
Richard Levitte authored
On Windows, it seems that doing so in a forked (pseudo-)process sometimes affects the parent, and thereby hides all the results that are supposed to be seen by the running test framework (the "ok" and "not ok" lines). It turns out that our redirection isn't necessary, as the test framework seems to swallow it all in non-verbose mode anyway. It's possible that we did need this at some point, but the framework has undergone some refinement since then... Reviewed-by:
-
Richard Levitte authored
We use the first we can of the following IO::Socket modules to create sockets: - IO::Socket::INET6 - IO::Socket::IP - IO::Socket::INET The last of them doesn't support IPv6, so if that's the one available, we must force the s_client and s_server processes to use IPv4. Reviewed-by:
-
- 16 Jan, 2018 2 commits
-
-
Matt Caswell authored
I received this error from a TLSProxy test: Failed to start up server (localhost,4443): Transport endpoint is not connected So, extend the timeout before we give up trying to connect to the server. Reviewed-by:
-
Matt Caswell authored
Commit 9f944291 changed the semantics of BN_copy() to additionally copy the BN_FLG_CONSTTIME flag if it is set. This turns out to be ill advised as it has unintended consequences. For example calling BN_mod_inverse_no_branch() can sometimes return a result with the flag set and sometimes not as a result. This can lead to later failures if we go down code branches that do not support constant time, but check for the presence of the flag. The original commit was made due to an issue in BN_MOD_CTX_set(). The original PR fixed the problem in that function, but it was changed in review to fix it in BN_copy() instead. The solution seems to be to revert the BN_copy() change and go back to the originally proposed way. Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/5080) (cherry picked from commit 7d461736)
-
- 15 Jan, 2018 2 commits
-
-
Richard Levitte authored
The same kind of failure that has already been observed on the s_client can sometimes also be observed on s_server, so we need to add the same kind of 50ms delay as was previously added on s_client. Ref: git commit cb2e10f2 : Reviewed-by:
-
Richard Levitte authored
This was identified for Windows almost two years ago for VC and msys/mingw. It seems that Cygwin suffers from the same issue, and since Cygwin doesn't define OPENSSL_SYS_WINDOWS, we need to make a special case to have a 50ms pause before closing the TLS connection. Ref: git commit cb2e10f2 Reviewed-by:
-
- 14 Jan, 2018 2 commits
-
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
