tag2nbyte had -1 at 18th position, but underlying ASN1_mbstring_copy
supports NumericString. tag2nbyte is also used in do_print_ex which will
not be broken by setting 1 at 18th position of tag2nbyte

Reviewed-by: Stephen Henson <steve@openssl.org>
(cherry picked from commit d6079a87)

[Note that in master declaration is different.]

RT#4568

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 14d3c0dd)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 4973a60c)

RT#4578

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 3d32bab8)

Sender verified that the fix works.  This is a backport/cherry-pick
of just the bugfix part of 0f91e1df



Reviewed-by: Richard Levitte <levitte@openssl.org>

This reverts commit 75f90688

.

TerminateProcess is asynchronous, so the code as written in the above
commit is not correct (and doesn't even compile at the moment). It is
also probably not needed in the speed case. Reverting in order to figure
out the correct solution.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 9c1a9ccf)

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit fdcb499c)

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit bace847e)

Reviewed-by: Matt Caswell <matt@openssl.org>
Manual cherry-pick of 538860a3.

The selector field could be omitted because it has a DEFAULT value.
In this case *sfld == NULL (sfld can never be NULL). This was not
noticed because this was never used in existing ASN.1 modules.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 7c46746b)

Couple of never-used symbols were clasing with FIPS module, "weakening"
them allows to resolve linking errors.

RT#3699

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Andy Polyakov <appro@openssl.org>

Use string_to_hex, OPENSSL_hexstr2buf() doesn't exist in OpenSSL 1.0.2

Reviewed-by: Rich Salz <rsalz@openssl.org>

crypto/mem_clr.c was harmonized with master branch and doesn't use
cleanse_ctr kludge anymore.

RT#4563

Reviewed-by: Rich Salz <rsalz@openssl.org>

Don't use BN_hex2bn() for PSK key conversion as the conversion to
BN and back removes leading zeroes, use OPENSSL_hexstr2buf() instead.

RT#4554

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 6ec6d520)

Conflicts:
	apps/s_client.c
	apps/s_server.c

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 6b360288)

It's probably worth reminding that this is a fall-back implementation
for platforms that don't have assembly OPENSSL_cleanse.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 5000a6d1)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 8605abf1)

The TS_RESP_verify_response() function is used for verifying the response
from a TSA. You can set the provided TS_VERIFY_CTX with different flags
depending on what aspects of the response you wish to verify.

A seg fault will occur if you supply the TS_VFY_SIGNER or TS_VFY_TSA_NAME
flags without also specifying TS_VFY_SIGNATURE.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The previous commit fixed a bug with BN_mod_word() which would have been
caught if we had a test for it. This commit adds one.

Reviewed-by: Andy Polyakov <appro@openssl.org>

On systems where we do not have BN_ULLONG (e.g. typically 64 bit systems)
then BN_mod_word() can return incorrect results if the supplied modulus is
too big.

RT#4501

Reviewed-by: Andy Polyakov <appro@openssl.org>
(cherry picked from commit 37258dad)

The previous "fix" still left "k" exposed to constant time problems in
the later BN_mod_inverse() call. Ensure both k and kq have the
BN_FLG_CONSTTIME flag set at the earliest opportunity after creation.

CVE-2016-2178

Reviewed-by: Rich Salz <rsalz@openssl.org>

Operations in the DSA signing algorithm should run in constant time in
order to avoid side channel attacks. A flaw in the OpenSSL DSA
implementation means that a non-constant time codepath is followed for
certain operations. This has been demonstrated through a cache-timing
attack to be sufficient for an attacker to recover the private DSA key.

CVE-2016-2178

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

According to the x509 man page in the section discussing -certopt it says
that the ca_default option is the same as that used by the ca utility and
(amongst other things) has the effect of suppressing printing of the
signature - but in fact it doesn't. This error seems to have been present
since the documentation was written back in 2001. It never had this effect.

The default config file sets the certopt value to ca_default. The ca utility
takes that and THEN adds additional options to suppress printing of the
signature. So the ca utility DOES suppress printing of the signature - but
it is not as a result of using the ca_default option.

GitHub Issue #247

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 39a47008)

If the string to print is exactly 2048 character long (excluding the NULL
terminator) then BIO_printf will chop off the last byte. This is because
it has filled its static buffer but hasn't yet allocated a dynamic buffer.
In cases where we don't have a dynamic buffer we need to truncate but that
is not the case for BIO_printf(). We need to check whether we are able to
have a dynamic buffer buffer deciding to truncate.

Reviewed-by: Rich Salz <rsalz@openssl.org>

zapparams modification based on tip from Matt Caswell

RT#3198

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Add missing ifdefs. Same change is already present in master, see
b4a3aeeb



Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1155)

Fix typos and clarify a few things in the CONTRIBUTING file.

Reviewed-by: Rich Salz <rsalz@openssl.org>

A common idiom in the codebase is:

if (p + len > limit)
{
    return; /* Too long */
}

Where "p" points to some malloc'd data of SIZE bytes and
limit == p + SIZE

"len" here could be from some externally supplied data (e.g. from a TLS
message).

The rules of C pointer arithmetic are such that "p + len" is only well
defined where len <= SIZE. Therefore the above idiom is actually
undefined behaviour.

For example this could cause problems if some malloc implementation
provides an address for "p" such that "p + len" actually overflows for
values of len that are too big and therefore p + len < limit!

Issue reported by Guido Vranken.

CVE-2016-2177

Reviewed-by: Rich Salz <rsalz@openssl.org>

Backport of 8e89e85f


From PR #1019 / #997

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1019)

Don't copy parameters is they're already present in the destination.
Return error if an attempt is made to copy different parameters to
destination. Update documentation.

If key type is not initialised return missing parameters

RT#4149

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit f72f00d4)