The f_err label is no longer needed so it can be removed.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Continuing from the previous commits, this splits out the GOST code into
a separate function from the process CKE code.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Continuing from the previous commits, this splits out the ECDHE code into
a separate function from the process CKE code.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Continuing from the previous commit, this splits out the DHE code into
a separate function from the process CKE code.

Reviewed-by: Richard Levitte <levitte@openssl.org>

The tls_process_client_key_exchange() function is far too long. This
splits out the PSK preamble processing, and the RSA processing into
separate functions.

Reviewed-by: Richard Levitte <levitte@openssl.org>

In preparation for splitting this function up into smaller functions this
commit reduces the scope of some of the variables to only be in scope for
the algorithm specific parts. In some cases that makes the error handling
more verbose than it needs to be - but we'll clean that up in a later
commit.

Reviewed-by: Richard Levitte <levitte@openssl.org>

This adds a new target 'build_programs' and makes 'build_apps' and
'build_tests' aliases for it, for backward compatibility.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

PROGRAM_NO_INST, ENGINES_NO_INST, SCRIPTS_NO_INST and LIBS_NO_INST are
to be used to specify program, engines, scripts and libraries that are
not to be installed in the system.  Fuzzers, test programs, that sort
of things are of the _NO_INST type, for example.

For the benefit of build file templates and other templates that use
data from configdata.pm, a new hash table $unified_info{install} is
created.  It contains a set of subhashes, one for each type of
installable, each having an array of file names as values.  For
example, it can look like this:

    "install" =>
        {
            "engines" =>
                [
                    "engines/afalg/afalg",
                    "engines/capi",
                    "engines/dasync",
                    "engines/padlock",
                ],
            "libraries" =>
                [
                    "libcrypto",
                    "libssl",
                ],
            "programs" =>
                [
                    "apps/openssl",
                ],
            "scripts" =>
                [
                    "apps/CA.pl",
                    "apps/tsget",
                    "tools/c_rehash",
                ],
        },

Reviewed-by: Rich Salz <rsalz@openssl.org>

The ASN.1 BIGNUM type needs to be handled in a custom way as it is
not a generic ASN1_STRING type.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Also elaborated a comment based on feedback.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Switch on Travis testing of SSLv3.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

The logic testing whether a CKE message is allowed or not was a little
difficult to follow. This tries to clean it up.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

The static function key_exchange_expected() used to return -1 on error.
Commit 361a1191

 changed that so that it can never fail. This means that
some tidy up can be done to simplify error handling in callers of that
function.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

If configuring for anything other than the default TLS protocols then
test failures were occuring.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Having received a ClientKeyExchange message instead of a Certificate we
know that we are not going to receive a CertificateVerify message. This
means we can free up the handshake_buffer. However we better call
ssl3_digest_cached_records() instead of just freeing it up, otherwise we
later try and use it anyway and a core dump results. This could happen,
for example, in SSLv3 where we send a CertificateRequest but the client
sends no Certificate message at all. This is valid in SSLv3 (in TLS
clients are required to send an empty Certificate message).

Found using the BoringSSL test suite.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

In TLS if the server sends a CertificateRequest and the client does not
provide one, if the server cannot continue it should send a
HandshakeFailure alert. In SSLv3 the same should happen, but instead we
were sending an UnexpectedMessage alert. This is incorrect - the message
isn't unexpected - it is valid for the client not to send one - its just
that we cannot continue without one.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

In TLS during ClientAuth if the CA is not recognised you should get an
UnknownCA alert. In SSLv3 this does not exist and you should get a
BadCertificate alert.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

The Client Auth tests were not correctly setting the Protocol, so that this
aspect had no effect. It was testing the same thing lots of times for
TLSv1.2 every time.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Move the preparation of the client certificate to be post processing work
after reading the CertificateRequest message rather than pre processing
work prior to writing the Certificate message. As part of preparing the
client certificate we may discover that we do not have one available. If
we are also talking SSLv3 then we won't send the Certificate message at
all. However, if we don't discover this until we are about to send the
Certificate message it is too late and we send an empty one anyway. This
is wrong for SSLv3.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Mingw builds on Travis were failing because INT_MAX was undeclared.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The i2d_SCT_LIST function is declared as __owur, therefore we need to check
the result or a --strict-warnings build will fail.

Reviewed-by: Rich Salz <rsalz@openssl.org>

and short-input performance.

[Fix bug in misaligned output handling.]

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

[Also optimize aligaddr usage in single-block subroutines.]

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1323

Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1322

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Instead of having fuzz/build.info.fuzz magically and conditionally
included along with the other build.info files, incorporate it in
fuzz/build.info and add the conditions there instead.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1313)

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Stephen Henson <steve@openssl.org>

RT#4611

Reviewed-by: Stephen Henson <steve@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>