- Aug 01, 2017
-
-
Paul Yang authored
Seems this documentation is not dead, so add this missing part Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4037) (cherry picked from commit 003ef7ef)
-
Ken Goldman authored
Document that the RSA_get0_ functions permit a NULL BIGNUM **. Those output parameters are ignored. Reviewed-by:
Paul Dale <paul.dale@oracle.com> Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4064) (cherry picked from commit 07c54e59)
-
- Jul 31, 2017
-
-
Bernd Edlinger authored
The memory blocks contain secret data and must be cleared before returning to the system heap. Reviewed-by:
-
Xiaoyin Liu authored
TLS_ST_SR_NEXT_PROTO means "SSLv3/TLS read next proto" Fix typo in the message for TLS_ST_SW_CERT_STATUS Reviewed-by:
-
Xiaoyin Liu authored
I think it's better to use `GetFileAttributes` to obtain the attributes of a file than `FindFirstFile`. If the input name contains `*`, this function should return failure rather than check whether the first match happens to be a file or a directory. Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/3991) (cherry picked from commit 5bd051a0)
-
- Jul 29, 2017
-
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Use OPENSSL_secure_clear_free for secure mem BIOs and X25519 private keys. Reviewed-by:
-
Bernd Edlinger authored
and d2i_PKCS8PrivateKey_bio before it goes out of scope. Reviewed-by:
-
- Jul 28, 2017
-
-
Paul Yang authored
original problem: if a private key is invaild, nothing outputted. the error filter in apps/rsa.c is not working any more. Reviewed-by:
-
Paul Yang authored
Reviewed-by:
Richard Levitte <levitte@openssl.org> Reviewed-by:
-
Richard Levitte authored
File::Glob::glob is deprecated, it's use generates this kind of message: File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at ../master/Configure line 277. So instead, use a construction that makes the caller glob() use File::Glob::bsd_glob(). Note that we're still excluding VMS, as it's directory specs use '[' and ']', which have a different meaning with bsd_glob and would need some extra quoting. This might change, but later. Reviewed-by:
-
- Jul 27, 2017
-
-
David Benjamin authored
Reviewed-by:
Ben Kaduk <kaduk@mit.edu> Reviewed-by:
-
- Jul 26, 2017
-
-
Emeric Brun authored
In 'crypto/rand/ossl_rand.c', a call to 'ASYNC_unblock_pause()' is missing in an error case. CLA: trivial Reviewed-by:
-
Emilia Kasper authored
Fixed in 5b8fa431 [ci skip] Reviewed-by:
-
Pauli authored
In function wait_for_async(), allocated async fds is freed if `SSL_get_all_async_fds` fails, but later `fds` is used. Interestingly, it is not freed when everything succeeds. Rewrite the FD set loop to make it more readable and to not modify the allocated pointer so it can be freed. Reviewed-by:
-
- Jul 25, 2017
-
-
Andy Polyakov authored
"Optimize" is in quotes because it's rather a "salvage operation" for now. Idea is to identify processor capability flags that drive Knights Landing to suboptimial code paths and mask them. Two flags were identified, XSAVE and ADCX/ADOX. Former affects choice of AES-NI code path specific for Silvermont (Knights Landing is of Silvermont "ancestry"). And 64-bit ADCX/ADOX instructions are effectively mishandled at decode time. In both cases we are looking at ~2x improvement. Hardware used for benchmarking courtesy of Atos, experiments run by Romain Dolbeau <romain.dolbeau@atos.net>. Kudos! This is minimalistic backpoint of 64d92d74 Thanks to David Benjamin for spotting typo in Knights Landing detection! Reviewed-by:
-
- Jul 24, 2017
-
-
Andy Polyakov authored
Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/3898) (cherry picked from commit 18437871)
-
Andy Polyakov authored
Reviewed-by:
-
Xiaoyin Liu authored
Reviewed-by:
-
lolyonok authored
CLA: trivial Reviewed-by:
-
Richard Levitte authored
There's a case when the environment variable OPENSSL_CONF is useless... when cross compiling for mingw and your wine environment has an environment variable OPENSSL_CONF. The latter will override anything that's given when starting wine and there make the use of that environment variable useless in our tests. Therefore, we should not trust it, and use explicit '-config' options instead. Reviewed-by:
-
Richard Levitte authored
Makefile.shared was designed to figure out static library names, shared library names, library version compatibility, import library names and the like on its own. This was a design for pre-1.1.0 OpenSSL because the main Makefile didn't have all that knowledge. With 1.1.0, the situation isn't the same, a lot more knowledge is included in the main Makefile, and while Makefile.shared did things right most of the time (there are some corner cases, such as the choice of .sl or .so as DSO extension on some HPUX versions), there's still an inherent fragility when one has to keep an eye on Makefile.shared to make sure it produces what the main Makefile produces. This change simplifies Makefile.shared by removing all its "intelligence" and have it depend entirely on the input from the main Makefile instead. That way, all the naming is driven from configuration data. Reviewed-by:
-
- Jul 23, 2017
-
-
Johannes Bauer authored
Changes the EC_KEY_METHOD_get_* family to not need a EC_KEY_METHOD* as its first parameter, but a const EC_KEY_METHOD*, which is entirely sufficient. Reviewed-by:
-
- Jul 19, 2017
-
-
Matt Caswell authored
The intention of the removed code was to check if the previous operation carried. However this does not work. The "mask" value always ends up being a constant and is all ones - thus it has no effect. This check is no longer required because of the previous commit. Reviewed-by:
-
Matt Caswell authored
In TLS mode of operation the padding value "pad" is obtained along with the maximum possible padding value "maxpad". If pad > maxpad then the data is invalid. However we must continue anyway because this is constant time code. We calculate the payload length like this: inp_len = len - (SHA_DIGEST_LENGTH + pad + 1); However if pad is invalid then inp_len ends up -ve (actually large +ve because it is a size_t). Later we do this: /* verify HMAC */ out += inp_len; len -= inp_len; This ends up with "out" pointing before the buffer which is undefined behaviour. Next we calculate "p" like this: unsigned char *p = out + len - 1 - maxpad - SHA256_DIGEST_LENGTH; Because of the "out + len" term the -ve inp_len value is cancelled out so "p" points to valid memory (although technically the pointer arithmetic is undefined behaviour again). We only ever then dereference "p" and never "out" directly so there is never an invalid read based on the bad pointer - so there is no security issue. This commit fixes the undefined behaviour by ensuring we use maxpad in place of pad, if the supplied pad is invalid. With thanks to Brian Carpenter for reporting this issue. Reviewed-by:
-
- Jul 18, 2017
-
-
Emilia Kasper authored
This is an inherent weakness of the padding mode. We can't make the implementation constant time (see the comments in rsa_pk1.c), so add a warning to the docs. Reviewed-by:
-
- Jul 17, 2017
-
-
Bernd Edlinger authored
Reviewed-by:
-
- Jul 14, 2017
-
-
Bernd Edlinger authored
Reviewed-by:
-
Roelof duToit authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> Reviewed-by:
-
Roelof duToit authored
This resolves the retry issue in general, but also the specific case where a TLS 1.3 server sends a post-handshake NewSessionTicket message prior to appdata. Reviewed-by:
-
- Jul 10, 2017
-
-
Bernd Edlinger authored
Reviewed-by:
-
- Jul 09, 2017
-
-
Richard Levitte authored
Unsigned overflow. Found by Brian Carpenter Fixes #3889 Reviewed-by:
-
- Jul 07, 2017
-
-
Richard Levitte authored
TAP::Parser::Aggregator::has_errors may return any number, not just 0 and 1. With Perl on VMS, any number from 2 and on is interpreted as a VMS status, the 3 lower bits are the encoded severity (1 = SUCCESS, for example), so depending on what has_errors returns, a test failure might be interpreted as a success. Therefore, it's better to make sure the exit code is 0 or 1, nothing else (they are special on VMS, and mean SUCCESS or FAILURE, to match Unix conventions). Reviewed-by:
-
Richard Levitte authored
VMS renames our libraries to fit VMS conventions. This must be accounted for when we want to load them. Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
- Jul 05, 2017
-
-
Rich Salz authored
Ported GH #3842 to 1.1.0 branch Reviewed-by:
-
Matt Caswell authored
Something environmental changed in travis so that it started preferring the ubuntu clang-3.9 version instead of the llvm.org one. This breaks the sanitiser based builds. This change forces travis to de-prioritise the ubuntu clang packages. [extended tests] Reviewed-by:
-
Richard Levitte authored
- in EVP_read_pw_string_min(), the return value from UI_add_* wasn't properly checked - in UI_process(), |state| was never made NULL, which means an error when closing the session wouldn't be accurately reported. Reviewed-by:
-
Richard Levitte authored
When tree_calculate_user_set() fails, a jump to error failed to deallocate a possibly allocated |auth_nodes|. Reviewed-by:
-
- Jul 03, 2017
-
-
Richard Levitte authored
Reviewed-by:
-
