Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3546)

An alert message is 2 bytes long. In theory it is permissible in SSLv3 -
TLSv1.2 to fragment such alerts across multiple records (some of which
could be empty). In practice it make no sense to send an empty alert
record, or to fragment one. TLSv1.3 prohibts this altogether and other
libraries (BoringSSL, NSS) do not support this at all. Supporting it adds
significant complexity to the record layer, and its removal is unlikely
to cause inter-operability issues.

The DTLS code for this never worked anyway and it is not supported at a
protocol level for DTLS. Similarly fragmented DTLS handshake records only
work at a protocol level where at least the handshake message header
exists within the record. DTLS code existed for trying to handle fragmented
handshake records smaller than this size. This code didn't work either so
has also been removed.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3476)

Enforcement of an SNI extension in the initial ClientHello is becoming
increasingly common (e.g. see GitHub issue #2580). This commit changes
s_client so that it adds SNI be default, unless explicitly told not to via
the new "-noservername" option.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2614)

X509_STORE_add_cert and X509_STORE_add_crl are changed to return
success if the object to be added was already found in the store, rather
than returning an error.

Raise errors if empty or malformed files are read when loading certificates
and CRLs.

Remove NULL checks and allow a segv to occur.
Add error handing for all calls to X509_STORE_add_c{ert|tl}

Refactor these two routines into one.

Bring the unit test for duplicate certificates up to date using the test
framework.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2830)

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3126)

Document thread-safety issues
Have RSA_null return NULL (always fails)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2244)

'j' is specified as modifier for "greatest-width integer type", which in
practice means 64 bits on both 32- and 64-bit platforms. Since we rely
on __attribute__((__format__(__printf__,...))) to sanitize BIO_print
format, we can use it to denote [u]int64_t-s in platform-neutral manner.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3083)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3064)

Fix some comments too
[skip ci]

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3069)

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3066)

Just as for DH, DSA and RSA, this gives the engine associated with the
key.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2960)

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2926)

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2917)

[skip ci]

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2785)

This reimplementation was necessary before VMS C V7.1.  Since that's
the minimum version we support in this OpenSSL version, the
reimplementation is no longer needed.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2762)

- Reject fractional seconds
- Reject offsets
- Check that the date/time digits are in valid range.
- Add documentation for X509_cmp_time

GH issue 2620

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

The core SipHash supports either 8 or 16-byte output and a configurable
number of rounds.
The default behavior, as added to EVP, is to use 16-byte output and
2,4 rounds, which matches the behavior of most implementations.
There is an EVP_PKEY_CTRL that can control the output size.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2216)

Reviewed-by: Richard Levitte <levitte@openssl.org>

Verify that the encrypt-then-mac negotiation is handled
correctly. Additionally, when compiled with no-asm, this test ensures
coverage for the constant-time MAC copying code in
ssl3_cbc_copy_mac. The proxy-based CBC padding test covers that as
well but it's nevertheless better to have an explicit handshake test
for mac-then-encrypt.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1669)

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

This reverts commit ca1574ce

.
Not suitabled for a minor release as it breaks the ABI.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1767)

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

EC DRBG support was added in 7fdcb457

 in 2011 and then later removed.
However the CHANGES entry for its original addition was left behind.
This just removes the spurious CHANGES entry.

Reviewed-by: Stephen Henson <steve@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add CVE to CHANGES

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1413)

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1413)

The release scripts expect to see the date "xx XXX xxxx" in CHANGES. At
some point the year got changed from xxxx to 2016. This changes it back.

Reviewed-by: Richard Levitte <levitte@openssl.org>