- Dec 04, 2017
-
-
MerQGh authored
This line will allow use private keys, which created by Crypto Pro, to sign with OpenSSL. CLA: trivial Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4836) (cherry picked from commit b35bb37a)
-
Markus Sauermann authored
CLA: trivial Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4835) (cherry picked from commit 1e2804f2)
-
- Nov 30, 2017
-
-
Viktor Dukhovni authored
This small change in the Unix template and shared library build scripts enables building "variant" shared libraries. A "variant" shared library has a non-default SONAME, and non default symbol versions. This makes it possible to build (say) an OpenSSL 1.1.0 library that can coexist without conflict in the same process address space as the system's default OpenSSL library which may be OpenSSL 1.0.2. Such "variant" shared libraries make it possible to link applications against a custom OpenSSL library installed in /opt/openssl/1.1 or similar location, and not risk conflict with an indirectly loaded OpenSSL runtime that is required by some other dependency. Variant shared libraries have been fully tested under Linux, and build successfully on MacOS/X producing variant DYLD names. MacOS/X Darwin has no symbol versioning, but has a non-flat library namespace. Variant libraries may therefore support multiple OpenSSL libraries in the same address space also with MacOS/X, despite lack of symbol versions, but this has not been verified. Variant shared libraries are optional and off by default. Reviewed-by: Richard Levitte <levitte@openssl.org>
-
FdaSilvaYY authored
Fixes #4775 Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4815)
-
- Nov 27, 2017
-
-
Rich Salz authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4805) (cherry picked from commit 378db52b)
-
- Nov 25, 2017
-
-
David Benjamin authored
This avoids taking quadratic time to pretty-print certificates with excessively large integer fields. Very large integers aren't any more readable in decimal than hexadecimal anyway, and the i2s_* functions will parse either form. Found by libFuzzer. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4790) (cherry picked from commit 10a3195f)
-
- Nov 24, 2017
-
-
Richard Levitte authored
A name too many in the NAME section, and a copyright year update Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4789) (cherry picked from commit 92793648)
-
Richard Levitte authored
One had some lines copied from the other, and both were missing a proper RETURN VALUES section. Fixes #4781 Reviewed-by: Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4787) (cherry picked from commit 51e47d5f)
-
- Nov 21, 2017
-
-
Richard Levitte authored
Fixes #4740 The MSYS2 run-time convert arguments that look like paths when executing a program unless that application is linked with the MSYS run-time. The exact conversion rules are listed here: http://www.mingw.org/wiki/Posix_path_conversion With the built-in configurations (all having names starting with "mingw"), the openssl application is not linked with the MSYS2 run-time, and therefore, it will receive possibly converted arguments from the process that executes it. This conversion is fine for normal path arguments, but it happens that some arguments to the openssl application get converted when they shouldn't. In one case, it's arguments like '-passin file:something', and in another, it's a file: URI (what typically happens is that URIs without an authority component get converted, 'cause the conversion mechanism doesn't recognise them as URIs). To avoid conversion where we don't want it, we simply assign MSYS2_ARG_CONV_EXCL a pattern to avoid specific conversions. As a precaution, we only do this where we obviously need it. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4766)
-
- Nov 16, 2017
-
-
Andy Polyakov authored
Performance regression was reported for EC key generation between 1.0.2 and 1.1.x [in GH#2891]. It naturally depends on platform, values between 6 and 9% were observed. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4743) (cherry picked from commit a78324d9)
-
- Nov 13, 2017
-
-
Andy Polyakov authored
|flags| argument to do_esc_char was apparently truncated by implicit cast. [Caught by VC warning subsytem.] Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4721) (cherry picked from commit 37246310)
-
- Nov 11, 2017
-
-
Long Qin authored
* addressing", Proc. 6th Conference on Very Large Databases: 212–223 ^ The EN DASH ('–') in this line is one UTF-8 character (hex: e2 80 93). Under some code page setting (e.g. 936), Visual Studio may report C4819 warning: The file contains a character that cannot be represented in the current code page. Replace this character with the ASCII char '-' (Hex Code: 2D). Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4691) (cherry picked from commit b4d0fa49)
-
- Nov 10, 2017
-
-
FdaSilvaYY authored
Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4677) (cherry picked from commit 1687aa76)
-
Andy Polyakov authored
In earlier 5.1x Perl versions quoting globs works only if there is white space. If there is none, it's looking for names starting with ". Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4695) (cherry picked from commit 1097d2a3)
-
- Nov 08, 2017
-
-
Andy Polyakov authored
HP-UX make doesn't recognize $< in explict target rules, only in inference ones such as .c.o. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4697) (cherry picked from commit b6705d48)
-
Andy Polyakov authored
HP-UX make doesn't recognize $< in explict target rules, only in inference ones such as .c.o. Reviewed-by: Rich Salz <rsalz@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4694)
-
- Nov 07, 2017
-
-
Richard Levitte authored
'rsa', 'sha' and 'tlsext' can't be disabled, not even as a consequence of other conditions, so having cascading disables that depend on them is futile. Clean up! Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4693) (cherry picked from commit 89635075)
-
Matt Caswell authored
If SSL_read() is called with a zero length buffer, and we read a zero length record then we should mark that record as read. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4686)
-
Matt Caswell authored
Normally TLSProxy waits for the s_server process to finish before continuing. However in cases where serverconnects > 1 we need to keep the s_server process around for a later test so we continue immediately. This means that TAP test output can end up being printed to stdout at the same time as s_server is printing stuff. This confuses the test runner and can cause spurious test failures. This commit introduces a small delay in cases where serverconnects > 1 in order to give s_server enough time to finish what it was doing before we continue to the next test. Fixes #4129 Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4661)
-
Matt Caswell authored
There were 4 macros in ocsp.h that have not worked since 1.1.0 because they attempt to access the internals of an opaque structure. For OCSP_REQUEST_sign() applications should use OCSP_request_sign() instead. For OCSP_BASICRESP_sign() applications should use OCSP_basic_sign() instead. For OCSP_REQUEST_verify() applications should use OCSP_request_verify() instead. For OCSP_BASICRESP_verify() applications should use OCSP_basic_verify() instead. Reviewed-by: Ben Kaduk <kaduk@mit.edu> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4635) (cherry picked from commit 9f5671c7)
-
- Nov 05, 2017
-
-
Richard Levitte authored
Instead of having perl modules under test/testlib and util, consolidate them all to be inside util/perl. (this is an adaptation of the part of #4069 that wasn't included in #4666) Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4667)
-
Richard Levitte authored
File::Glob::glob is deprecated, it's use generates this kind of message: File::Glob::glob() will disappear in perl 5.30. Use File::Glob::bsd_glob() instead. at ../master/Configure line 277. The first idea was to use a construction that makes the caller glob() use File::Glob::bsd_glob(). That turned out not to work well everywhere, so instead, we make our own wrapper, OpenSSL::Glob and use that. Fixes #4636 (this is an adaptation of #4040 and part of #4069, for 1.1.0) Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4666)
-
Andy Polyakov authored
It's not clear if it's a feature or bug, but binutils-2.29[.1] interprets 'adr' instruction with Thumb2 code reference differently, in a way that affects calculation of addresses of constants' tables. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/4669) (cherry picked from commit b82acc3c)
-
- Nov 03, 2017
-
-
FdaSilvaYY authored
Duplicated tests descriptions Backport of #3580 to 1.1.0 plus a few other typo fixes found at fligth. Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/4645)
-
Pavel Kopyl authored
CLA: trivial Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/4600) (cherry picked from commit a6f622bc)
-
Pavel Kopyl authored
CLA: trivial Reviewed-by: Kurt Roeckx <kurt@roeckx.be> Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/4600) (cherry picked from commit 7760384b)
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4652) (cherry picked from commit d7948767)
-
- Nov 02, 2017
-
-
Matt Caswell authored
Reviewed-by: Andy Polyakov <appro@openssl.org>
-
Matt Caswell authored
Reviewed-by: Andy Polyakov <appro@openssl.org>
-
Matt Caswell authored
Reviewed-by: Andy Polyakov <appro@openssl.org>
-
Andy Polyakov authored
Credit to OSS-Fuzz for finding this. CVE-2017-3736 Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
In OpenSSL pre 1.1.0, 'openssl x509 -CAkeyformat engine' was possible and supported. In 1.1.0, a small typo ('F' instead of 'f') removed that possibility. This restores the pre 1.1.0 behavior. Fixes #4366 Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4643) (cherry picked from commit bd6eba79)
-
- Nov 01, 2017
-
-
Pauli authored
information about the length of the scalar used in ECDSA operations from a large number (2^32) of signatures. This doesn't rate as a CVE because: * For the non-constant time code, there are easier ways to extract more information. * For the constant time code, it requires a significant number of signatures to leak a small amount of information. Thanks to Neals Fournaise, Eliane Jaulmes and Jean-Rene Reinhard for reporting this issue. Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4576) (cherry picked from commit 4a089bbd)
-
Pauli authored
information about the length of a value used in DSA operations from a large number of signatures. This doesn't rate as a CVE because: * For the non-constant time code, there are easier ways to extract more information. * For the constant time code, it requires a significant number of signatures to leak a small amount of information. Thanks to Neals Fournaise, Eliane Jaulmes and Jean-Rene Reinhard for reporting this issue. Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4576) (cherry picked from commit c0caa945)
-
- Oct 31, 2017
-
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4631)
-
Richard Levitte authored
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4633)
-
Richard Levitte authored
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4633)
-
Richard Levitte authored
Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4633)
-
Richard Levitte authored
This version was a direct port from 1.1.1-dev, which has a different source structure for the docs. Adjustment done. Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4633)
-
Richard Levitte authored
Missing names slipped through Reviewed-by: Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/4630)
-