Was only approved for master, to avoid compatibility issues on
previous releases.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

In master we have the function OPENSSL_clear_free(x,y), which immediately
returns if x == NULL. In <=1.0.2 this function does not exist so we have to
do:
OPENSSL_cleanse(x, y);
OPENSSL_free(x);

However, previously, OPENSSL_cleanse did not check that if x == NULL, so
the real equivalent check would have to be:
if (x != NULL)
    OPENSSL_cleanse(x, y);
OPENSSL_free(x);

It would be easy to get this wrong during cherry-picking to other branches
and therefore, for safety, it is best to just ensure OPENSSL_cleanse also
checks for NULL.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 020d8fc8)

Previously, the conversion would silently coerce to ASCII. Now, we error
out.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit b785504a)

Rewrite EVP_DecodeUpdate.

In particular: reject extra trailing padding, and padding in the middle
of the content. Don't limit line length. Add tests.

Previously, the behaviour was ill-defined, and depended on the position
of the padding within the input.

In addition, this appears to fix a possible two-byte oob read.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Dr Stephen Henson <steve@openssl.org>
(cherry picked from commit 3cdd1e94)

Reviewed-by: Rich Salz <rsalz@openssl.org>
MR #1128

(cherry picked from commit fae11ec7)

PR#4035

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 83fcd322)

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
MR #1005
(cherry picked from commit a46c9789)

PR#3920.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit aabd4923)

PR#3958

Reviewed-by: Rich Salz <rsalz@openssl.org>

PR#4036

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

If the field separator isn't specified through -nameopt then use
XN_FLAG_SEP_CPLUS_SPC instead of printing nothing and returing an error.

PR#2397

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 03706afa)

Fix both the caller to error out on malloc failure, as well as the
eventual callee to handle a NULL gracefully.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

PR#4009.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 13e228d6)

Conflicts:
	ssl/ssl_ciph.c

Closes #63

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Laurie <ben@openssl.org>
(cherry picked from commit 66c103bd)

Avoid using cnid = 0, use NID_undef instead, and return early instead
of trying to find an instance of that in the subject DN.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit fffc2fae)

Initialize pointers in param id by the book (explicit NULL assignment,
rather than just memset 0).

In x509_verify_param_zero() set peername to NULL after freeing it.

In x509_vfy.c's internal check_hosts(), avoid potential leak of
possibly already non-NULL peername.  This is only set when a check
succeeds, so don't need to do this repeatedly in the loop.

Reviewed-by: Richard Levitte <levitte@openssl.org>

(cherry picked from commit a0724ef1)

No, we should just delete it.  And updated the README

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 8db78781)

Backport of equivalent fix from master. The only compression
method is stateful and hence incompatible with DTLS. The DTLS
test was not working for DTLS1.2

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix the setup of DTLS1.2 buffers to take account of the Header

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Commit f0348c84

 introduced a problem with session resumption. The
version for the session is fixed when the session is created. By moving
the creation of the session earlier in the process the version is fixed
*before* version negotiation has completed when processing the ServerHello
on the client side. This fix updates the session version after version neg
has completed.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Builds using no-tlsext in 1.0.0 and 0.9.8 are broken. This commit fixes the
issue. The same commit is applied to 1.0.1 and 1.0.2 branches for code
consistency. However this commit will not fix no-tlsext in those branches
which have always been broken for other reasons. The commit is not applied
to master at all, because no-tlsext has been completely removed from that
branch.

Based on a patch by Marc Branchaud <marcnarc@xiplink.com>

Reviewed-by: Emilia Käsper <emilia@openssl.org>

The |z| value should be 0x04 not 0x02

RT#3838

Signed-off-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 91d2728b)

Reviewed-by: Rich Salz <rsalz@openssl.org>

The NULL cipher case can't actually happen because we have no
EVP_PBE_CTL combinations where cipher_nid is -1 and keygen is
PKCS12_PBE_keyivgen. But make the code more obviously correct.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit 394f7b6f)

- Pass in the right ciphertext length to ensure we're indeed testing
  ciphertext corruption (and not truncation).
- Only test one mutation per byte to not make the test too slow.
- Add a separate test for truncated ciphertexts.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 25d6b340)

Because we recently encourage people to have a .dir-locals.el, it's a good
idea to ignore it on a git level.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d7c02691)

Slightly modified from the original PR.
Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>

(cherry picked from commit a7e974c7)

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 36ac7bc8)

Don't dereference |d| when |top| is zero. Also test that various BIGNUM methods behave correctly on zero/even inputs.

Follow-up to b11980d7



Reviewed-by: Rich Salz <rsalz@openssl.org>

Apparently, emacs sees changes to auto-fill-mode as insecure

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 6dc08048)

This file, when copied to .dir-locals.el in the OpenSSL source top,
will make sure that the CC mode style "OpenSSL-II" will be used for
all C files.

Additionally, I makes sure that tabs are never used as indentation
character, regardless of the emacs mode, and that the fill column is
78.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit 0927f0d8)

This hopefully conforms closely enough to the current code style.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(cherry picked from commit d9b3554b)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(cherry picked from commit 4d04226c)

Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 9db0c91c)

Fix more potential leaks in X509_verify_cert()
Fix memory leak in ClientHello test
Fix memory leak in gost2814789 test
Fix potential memory leak in PKCS7_verify()
Fix potential memory leaks in X509_add1_reject_object()
Refactor to use "goto err" in cleanup.

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit 55500ea7)

If the seed value for dsa key generation is too short (< qsize),
return an error. Also update the documentation.

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(cherry picked from commit f00a10b8)

add -help descriptions of -curves, -sigalgs, -client_sigalgs
to s_client and s_server

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>