Many of these were already fixed, this catches the last
few that were missed.

A small markdown README for GitHub users; points them to
the right README and the website and RT tracker.

The addition of SRP authentication needs to be checked in various places
to work properly. Specifically:

A certificate is not sent.
A certificate request must not be sent.
Server key exchange message must not contain a signature.
If appropriate SRP authentication ciphersuites should be chosen.
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Undo unapproved commit that removed DJGPP and WATT32

The "unsigned char *d" should be const.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>

Use SSL3_AL_FATAL instead of the literal constant "2"
Every bit of cleanup helps.
Reviewed-by: Matt Caswell <matt@openssl.org>

DJGPP is no longer a supported platform.  Remove all #ifdef, etc.,
cases that refer to it.  DJGPP also #define'd WATT32, so that
is now removed as well.

Check SRP parameters when they are received so we can send back an
appropriate alert.
Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Invalid parameters passed to the SRP code can be overrun an internal
buffer. Add sanity check that g, A, B < N to SRP code.

Thanks to Sean Devlin and Watson Ladd of Cryptography Services, NCC
Group for reporting this issue.

If a client attempted to use an SRP ciphersuite and it had not been
set up correctly it would crash with a null pointer read. A malicious
server could exploit this in a DoS attack.

Thanks to Joonas Kuorilehto and Riku Hietamäki from Codenomicon
for reporting this issue.

CVE-2014-2970
Reviewed-by: Tim Hudson <tjh@openssl.org>

CVE-2014-3509
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

- Upon parsing, reject OIDs with invalid base-128 encoding.
- Always NUL-terminate the destination buffer in OBJ_obj2txt printing function.

CVE-2014-3508

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

CVE-2014-3510

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

CVE-2014-3511

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Bodo Möller <bodo@openssl.org>

In a couple of functions, a sequence number would be calculated twice.

Additionally, in |dtls1_process_out_of_seq_message|, we know that
|frag_len| <= |msg_hdr->msg_len| so the later tests for |frag_len <
msg_hdr->msg_len| can be more clearly written as |frag_len !=
msg_hdr->msg_len|, since that's the only remaining case.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Applying same fix as in dtls1_process_out_of_seq_message. A truncated DTLS fragment would cause *ok to be clear, but the return value would still be the number of bytes read.

Problem identified by Emilia Käsper, based on previous issue/patch by Adam
Langley.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Previously, a truncated DTLS fragment in
|dtls1_process_out_of_seq_message| would cause *ok to be cleared, but
the return value would still be the number of bytes read. This would
cause |dtls1_get_message| not to consider it an error and it would
continue processing as normal until the calling function noticed that
*ok was zero.

I can't see an exploit here because |dtls1_get_message| uses
|s->init_num| as the length, which will always be zero from what I can
see.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

The |pqueue_insert| function can fail if one attempts to insert a
duplicate sequence number. When handling a fragment of an out of
sequence message, |dtls1_process_out_of_seq_message| would not call
|dtls1_reassemble_fragment| if the fragment's length was zero. It would
then allocate a fresh fragment and attempt to insert it, but ignore the
return value, leaking the fragment.

This allows an attacker to exhaust the memory of a DTLS peer.

Fixes CVE-2014-3507

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

In |dtls1_reassemble_fragment|, the value of
|msg_hdr->frag_off+frag_len| was being checked against the maximum
handshake message size, but then |msg_len| bytes were allocated for the
fragment buffer. This means that so long as the fragment was within the
allowed size, the pending handshake message could consume 16MB + 2MB
(for the reassembly bitmap). Approx 10 outstanding handshake messages
are allowed, meaning that an attacker could consume ~180MB per DTLS
connection.

In the non-fragmented path (in |dtls1_process_out_of_seq_message|), no
check was applied.

Fixes CVE-2014-3506

Wholly based on patch by Adam Langley with one minor amendment.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Reviewed-by: Emilia Käsper <emilia@openssl.org>

The |item| variable, in both of these cases, may contain a pointer to a
|pitem| structure within |s->d1->buffered_messages|. It was being freed
in the error case while still being in |buffered_messages|. When the
error later caused the |SSL*| to be destroyed, the item would be double
freed.

Thanks to Wah-Teh Chang for spotting that the fix in 1632ef74

 was
inconsistent with the other error paths (but correct).

Fixes CVE-2014-3505

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

(If a change is already present in 1.0.1f or 1.0.1h,
don't list it again under changes between 1.0.1h and 1.0.2.)

(which didn't always handle value 0 correctly).

Reviewed-by:  <emilia@openssl.org>

Don't call internal functions directly call them through
SSL_test_functions(). This also makes unit testing work on
Windows and platforms that don't export internal functions
from shared libraries.

By default unit testing is not enabled: it requires the compile
time option "enable-unit-test".
Reviewed-by: Geoff Thorpe <geoff@openssl.org>

The call to setenv in gost2814789t.c is not portable and may
not reflect the location of the GOST ENGINE on all platforms anyway.
Instead set OPENSSL_ENGINES in test/Makefile
Reviewed-by: Geoff Thorpe <geoff@openssl.org>

This has been unmaintained for a long time. If it's still of interest
to anyone, it can be obtained easily enough by reverting this commit.
(It could join other demo code in some other repository, perhaps.) In
any case we don't want it taking up space in the baseline source
package, so <snip>.

Signed-off-by: Geoff Thorpe <geoff@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

PR#2569

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

and improve performance by 10% on POWER[78].

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

statement of opinion rather than a fact.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

[and split ppccap.c to ppccap.c and ppc_arch.h]

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add cmac.h to mkdef.pl
Remove ENGINE_load_rsax from engine.h: no longer built.
Update ordinals
Reviewed-by: Tim Hudson <tjh@openssl.org>

PR#1675
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>