- 19 Mar, 2018 10 commits
-
-
Matt Caswell authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5644)
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
If the server is configured to allow early data then we check if the PSK session presented by the client is available in the cache or not. If it isn't then this may be a replay and we disallow it. If it is then we allow it and remove the session from the cache. Note: the anti-replay protection is not used for externally established PSKs. Reviewed-by:
-
Matt Caswell authored
We should only update the session cache when we issue a NewSessionTicket. These are issued automatically after processing a client certificate. Reviewed-by:
-
Matt Caswell authored
Conceptually in TLSv1.3 there can be multiple sessions associated with a single connection. Each NewSessionTicket issued can be considered a separate session. We can end up issuing multiple NewSessionTickets on a single connection at the moment (e.g. in a post-handshake auth scenario). Each of those issued tickets should have the new_session_cb called, it should go into the session cache separately and it should have a unique id associated with it (so that they can be found individually in the cache). Reviewed-by:
-
JeffZhao authored
VIA and Shanghai United Investment Co.,Ltd. found Shanghai ZhaoXin, which is a fabless x86 CPU IC design company. ZhaoXin has issued ZX-C, ZX-D x86 processors, which have 'Shanghai' CPU vendor id. Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5640)
-
Richard Levitte authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5660)
-
Richard Levitte authored
When doing a regression test, it's obvious that the version test/shlibloadtest is built for will not be the same as the library version. So we change the test to check for assumed compatibility. Reviewed-by:
-
Richard Levitte authored
This is only useful when building shared libraries. This allows us to run our tests against newer libraries when the time comes. Simply do this: OPENSSL_REGRESSION=/other/OpenSSL/build/tree make test ($OPENSSL_REGRESSION *must* be an absolute path) Reviewed-by:
-
- 18 Mar, 2018 1 commit
-
-
Andy Polyakov authored
Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5647)
-
- 17 Mar, 2018 8 commits
-
-
Dr. Matthias St. Pierre authored
- d2i_PKC8PrivateKey -> d2i_PKCS8PrivateKey - bechmark -> benchmark - ciperhsuite -> ciphersuite - EncyptedPreMasterSecret -> EncryptedPreMasterSecret Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Kurt Roeckx authored
There is a requirements of having access to a live entropy source which we can't do with the default callbacks. If you need prediction resistance you need to set up your own callbacks that follow the requirements of NIST SP 800-90C. Reviewed-by:Dr. Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> GH: #5402
-
Kurt Roeckx authored
Reviewed-by: -
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
-
Bernd Edlinger authored
Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> Reviewed-by:
Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/5646)
-
Bernd Edlinger authored
Fixes: #5567 Reviewed-by:
-
- 16 Mar, 2018 8 commits
-
-
Dr. Matthias St. Pierre authored
This commit adds a new api RAND_DRBG_set_defaults() which sets the default type and flags for new DRBG instances. See also #5576. Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
There were a few environment variables that we supported in earlier Configure versions which got transfered to the %user table. This change makes sure that we still support them, by simply pre-populating the corresponding %user entries with those environment values. Reviewed-by:
-
Richard Levitte authored
The original intent was that if someone had a "make variable" set in any kind of way, be it as an environment variable or as an argument to Configure, we wouldn't allow compiler or linker flags as arguments as well. That made both of these configurations equivalently impossible: ./Configure target CFLAGS=-foo -lextra CFLAGS=-foo ./Configure target -lextra While this makes things look nice and consistent, real world use makes this hard, as many projects where OpenSSL is a component also set these variables for other components that use GNU autotools. Therefore, we need to adapt our Configure accordingly. By consequence, the two Configure lines above will not be equivalent any more: ./Configure target CFLAGS=-foo -lextra This command line will still fail, because the "make variable" was given as a command line argument. This cannot be a mistake and is therefore not allowed. CFLAGS=-foo ./Configure target -lextra This command line will work, but because there is a linker flag as a command line argument, the environment (i.e. CFLAGS) is ignored. That isn't quite consistent with the previous command, but is the old Configure behavior, before the support for "make variables" was added, and is therefore the backward compatible behavior. Fixes google/oss-fuzz#1244 Reviewed-by: -
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Richard Levitte authored
In the end, it's more efficient to only have one perl instance (that loads configdata.pm) dealing with dependency files than running one (that still loads configdata.pm) for each such file. Reviewed-by:
-
- 15 Mar, 2018 13 commits
-
-
Richard Levitte authored
Affected symbol names: generate_stateless_cookie_callback verify_stateless_cookie_callback Reviewed-by:
-
Richard Levitte authored
Reviewed-by:
-
Dr. Matthias St. Pierre authored
Fixes #4403 This commit moves the internal header file "internal/rand.h" to <openssl/rand_drbg.h>, making the RAND_DRBG API public. The RAND_POOL API remains private, its function prototypes were moved to "internal/rand_int.h" and converted to lowercase. Documentation for the new API is work in progress on GitHub #5461. Reviewed-by:
-
Rich Salz authored
Reviewed-by:
-
Richard Levitte authored
Instead of just working line by line, we collect all dependencies for every target and print everything out at the end, with each target getting a potentially long list of dependencies. Reviewed-by:
-
Richard Levitte authored
All dependencies that VC gives us are absolute paths, so we need to check if some of them are within our source or build tree. We do that by comparing the start of each dependency with the absolute versions of our source and build directories. Reviewed-by:
-
Richard Levitte authored
It seems that only gcc -MMD produces dependency files that are "sane" for our needs. For all other methods, some post processing is needed: - 'makedepend' (Unix) insists that object files are located in the same spot as the source file. - 'cl /Zs /showIncludes' (Visual C) has "Note: including file: " where we'd like to see the object. - 'CC/DECC' (VMS) insists that the object file is located in the current directory, i.e. it strips away all directory information. So far, we've managed this (except for the VMS case) with individual uncommented perl command lines directly in the build file template. We're now collecting these diverse hacks into one perl script that takes an argument to tell what kind of input to expect and that massages whatever it gets on STDIN and outputs the result on STDOUT. Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
Reviewed-by:
-
Matt Caswell authored
It is quite likely for there to be multiple certificates with empty subjects, which are still distinct because of subjectAltName. Therefore we allow multiple certificates with an empty Subject even if unique_subject is set to yes. Reviewed-by:
-
Matt Caswell authored
Commit 87e8feca (16 years ago!) introduced a bug where if we are attempting to insert a cert with a duplicate subject name, and duplicate subject names are not allowed (which is the default), then we get an unhelpful error message back (error number 2). Prior to that commit we got a helpful error message which displayed details of the conflicting entry in the database. That commit was itself attempting to fix a bug with the noemailDN option where we were setting the subject field in the database too early (before extensions had made any amendments to it). This PR moves the check for a conflicting Subject name until after all changes to the Subject have been made by extensions etc. This also, co-incidentally fixes the ca crashing bug described in issue 5109. Fixes #5109 Reviewed-by:
-
Matt Caswell authored
This reverts commit e505f1e8 . Empty Subjects should be permissible. Reviewed-by:
-
Matt Caswell authored
This reverts commit 1e05c6d0 . Empty subjects should be permissible. Reviewed-by:
-
