- Mar 09, 2018
-
-
Todd Short authored
Add functions that will do the work of assigning certificate, privatekey and chain certs to an SSL or SSL_CTX. If no privatekey is given, use the publickey. This will permit the keys to pass validation for both ECDSA and RSA. If a private key has already been set for the certificate, it is discarded. A real private key can be set later. This is an all-or-nothing setting of these parameters. Unlike the SSL/SSL_CTX_use_certificate() and SSL/SSL_CTX_use_PrivateKey() functions, the existing cert or privatekey is not modified (i.e. parameters copied). This permits the existing cert/privatekey to be replaced. It replaces the sequence of: * SSL_use_certificate() * SSL_use_privatekey() * SSL_set1_chain() And may actually be faster, as multiple checks are consolidated. The private key can be NULL, if so an ENGINE module needs to contain the actual private key that is to be used. Note that ECDH (using the certificate's ECDSA key) ciphers do not work without the private key being present, based on how the private key is used in ECDH. ECDH does not offer PFS; ECDHE ciphers should be used instead. Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Ben Kaduk <kaduk@mit.edu> (Merged from https://github.com/openssl/openssl/pull/1130)
-
Andy Polyakov authored
This includes even ARM targets. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5502)
-
Andy Polyakov authored
$target{build_scheme} consists of fixed number of elements with 3rd element denoting VC install-path "flavour", i.e. where to install things. Instead of looking at 3rd, let's look at last. This allows to override flavour from template in a simple way. Configurations/10-main.conf: define generic "flavour" in VC-common template. Since VC-W32 was the only recognized "flavour", remove "flavour" definitions from all targets/templates, but VC-WIN32. And rename VC-W32 to VC-WOW. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5502)
-
Andy Polyakov authored
Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5502)
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5572)
-
Richard Levitte authored
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5560)
-
Richard Levitte authored
We're currently using the attributes 'defines', 'cppflags', 'cflags' etc quite liberally, with no regard for where that ends up. Quite a few of those flags are actually only relevant for the libraries (mostly libcrypto), so it's safe to say that those could be applied to the libraries only. So, we move some of those flags to 'lib_defines', 'lib_cppflags', 'lib_cflags', etc. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5560)
-
Steven Noonan authored
CLA: trivial Signed-off-by: Steven Noonan <steven@uplinklabs.net> Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5551)
-
Alex Gaynor authored
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5569)
-
Matt Caswell authored
Allow users to distinguish between an error occurring and an HRR being issued. Fixes #5549 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5562)
-
Matt Caswell authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5554)
-
Matt Caswell authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5554)
-
Matt Caswell authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5554)
-
Matt Caswell authored
We also default to SHA256 as per the spec if we do not have an explicit digest defined. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5554)
-
- Mar 08, 2018
-
-
Viktor Dukhovni authored
Reviewed-by: Matt Caswell <matt@openssl.org>
-
Richard Levitte authored
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5564)
-
Michael Richardson authored
Travis-ci log output is huge and overflows internal travis-ci view, which makes it hard to find errors. Redirect some output to a file and dump it only if it fails. Remove "v" option from tar that builds and extracts the srcdist. While running the tests manually, some non-POSIX (bashisms) with == vs = came to light. Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5555)
-
Richard Levitte authored
The check to detect if env / make variables conflicted with compiler / linker flags on the configure command line went a little too far, and would stop the configuration process if any such command line flag was given, with no regard for the env / make variables at all. This change refines the check so the stop only gets triggered if any such flags were given AND any of the corresponding variables are set. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5561)
-
Richard Levitte authored
Fixes #5310 Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5315)
-
Richard Levitte authored
Note that this might give surprising results if someone forgets an environment variable that has been set previously. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5534)
-
Richard Levitte authored
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5534)
-
Richard Levitte authored
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5534)
-
Richard Levitte authored
Passing flags "discovered" by 'config' on the command line to 'Configure' mixes them up with flags given by the user. That is contrary to their intention, so they need to be passed in a different manner. Enter the environment variables __CNF_CPPDEFINES, __CNF_CPPINCLUDES, __CNF_CPPFLAGS, __CNF_CFLAGS, __CNF_CXXFLAGS, __CNF_LDFLAGS, and __CNF_LDLIBS, initialised by 'config', and then used by Configure to initialise these %config values: defines, includes, cppflags, cflags, cxxflags, lflags, and ex_libs. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5534)
-
Richard Levitte authored
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5534)
-
Richard Levitte authored
Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5534)
-
Richard Levitte authored
With the support of "make variables" comes the possibility for the user to override them. However, we need to make a difference between defaults that we use (and that should be overridable by the user) and flags that are crucial for building OpenSSL (should not be overridable). Typically, overridable flags are those setting optimization levels, warnings levels, that kind of thing, while non-overridable flags are, for example, macros that indicate aspects of how the config target should be treated, such as L_ENDIAN and B_ENDIAN. We do that differentiation by allowing upper case attributes in the config targets, named exactly like the "make variables" we support, and reserving the lower case attributes for non-overridable project flags. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5534)
-
Richard Levitte authored
Because there are already attributes with the dso_ prefix that are used instead of the corresponding lib_ attributes rather than in addition to them, it gets confusing to have similar or exactly the same attributes working with different semantics on Unix. So we rename those by changing the prefix dso_ to module_, and having those work just like the shared_ attributes, but for DSOs. Reviewed-by: Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5534)
-
FdaSilvaYY authored
... and add some missing known values. Sort ssl/tls extension array list Reviewed-by: Matt Caswell <matt@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5304)
-
Bryan Donlan authored
This patch fixes two issues in the ia32 RDRAND assembly code that result in a (possibly significant) loss of entropy. The first, less significant, issue is that, by returning success as 0 from OPENSSL_ia32_rdrand() and OPENSSL_ia32_rdseed(), a subtle bias was introduced. Specifically, because the assembly routine copied the remaining number of retries over the result when RDRAND/RDSEED returned 'successful but zero', a bias towards values 1-8 (primarily 8) was introduced. The second, more worrying issue was that, due to a mixup in registers, when a buffer that was not size 0 or 1 mod 8 was passed to OPENSSL_ia32_rdrand_bytes or OPENSSL_ia32_rdseed_bytes, the last (n mod 8) bytes were all the same value. This issue impacts only the 64-bit variant of the assembly. This change fixes both issues by first eliminating the only use of OPENSSL_ia32_rdrand, replacing it with OPENSSL_ia32_rdrand_bytes, and fixes the register mixup in OPENSSL_ia32_rdrand_bytes. It also adds a sanity test for OPENSSL_ia32_rdrand_bytes and OPENSSL_ia32_rdseed_bytes to help catch problems of this nature in the future. Reviewed-by: Andy Polyakov <appro@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5342)
-
Alex Gaynor authored
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/5553)
-
- Mar 07, 2018
-
-
Alex Gaynor authored
Reviewed-by: Tim Hudson <tjh@openssl.org> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5542)
-
Sergey Zhuravlev authored
Add OIDs for parameter sets of Edwards elliptic curves. CLA: trivial Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5380)
-
Matt Caswell authored
PR #3399 converted shlibloadtest to the new test framework. It also seemed to add some `OPENSSL_USE_NODELETE` guards to the library unloading part of the test. This part was added in a commit with this description: Review feedback; use single main, #ifdef ADD_TEST Suppose OPENSSL_USE_NODELETE (via Nick Reilly) Strangely though there doesn't seem to be any relevant review feedback in that PR that could justify the addition of those guards. The guards do not appear in 1.1.0. Having the guards changes the nature of the test, so that we only test library unloading on platforms where OPENSSL_USE_NODELETE is set (Linux and Windows). I can't think of any good reason for this and as it doesn't seem to be necessary in 1.1.0 so I think we should remove them. Reviewed-by: Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5530)
-
Viktor Dukhovni authored
With "-multi" the OCSP responder forks multiple child processes, and respawns them as needed. This can be used as a long-running service, not just a demo program. Therefore the index file is automatically re-read when changed. The responder also now optionally times out client requests. Reviewed-by: Matt Caswell <matt@openssl.org>
-
Viktor Dukhovni authored
Retain open file handle and previous stat data for the CA index file, enabling detection and index reload (upcoming commit). Check requirements before entering accept loop. Reviewed-by: Matt Caswell <matt@openssl.org>
-
Richard Levitte authored
We have never used these variables with the Unix Makefile, and there's no reason for us to change this, so to avoid confusion, we remove them. Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5545)
-
Dr. Matthias St. Pierre authored
BIO_get_mem_data() and BIO_get_mem_ptr() assign to *pp, not pp Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5544)
-
- Mar 06, 2018
-
-
Andy Polyakov authored
When running iOS application from command line it's impossible to get past the failing capability detection. This is because it's executed under debugger and iOS debugger is impossible to deal with. [If Apple implements SHA512 in silicon, it would have to be detected with sysctlbyname.] Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Andy Polyakov authored
-fno-common was removed for all Darwin targets in 0c873419 with rationale "it's either 'ranlib -c' or '-fno-common'." However, it's still absolutely required in 32-bit darwin-ppc-cc. And when trying things out I didn't quite see why it was formulated as one-or-another choice, as 'ranlib -c' shouldn't [and doesn't] have problems with object modules without commons. [Well, to be frank, I didn't manage to reproduce the problem the modification was meaning to resolve either...] Reviewed-by: Rich Salz <rsalz@openssl.org>
-
Richard Levitte authored
Reviewed-by: Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/5533)
-