- 03 Aug, 2018 1 commit
-
-
Dr. Matthias St. Pierre authored
Fixes #6800 Replaces #5418 This commit reverts commit 7876dbff and moves the check for a zero-length input down the callstack into sha3_update(). Reviewed-by:
Matt Caswell <matt@openssl.org> Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/6838)
-
- 02 Aug, 2018 1 commit
-
-
Bernd Edlinger authored
Fixes: #6826 [extended tests] Reviewed-by:
Matt Caswell <matt@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6833)
-
- 01 Aug, 2018 2 commits
-
-
Andy Polyakov authored
CRYPTO_atomic_add was assumed to return negative value on error, while it returns 0. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Pauli authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6830)
-
- 31 Jul, 2018 9 commits
-
-
Richard Levitte authored
There are symbols we've marked for deprecation in OpenSSL 1.2.0. We must ensure that they don't actually become deprecated before that. Fixes #6814 Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/6824)
-
Rich Salz authored
Clarify docs to list that some protocol flags might not be available depending on how OpenSSL was build. Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/6816)
-
Matt Caswell authored
Ensure that the certificate required alert actually gets sent (and doesn't get translated into handshake failure in TLSv1.3). Ensure that proper reason codes are given for the new TLSv1.3 alerts. Remove an out of date macro for TLS13_AD_END_OF_EARLY_DATA. This is a left over from an earlier TLSv1.3 draft that is no longer used. Fixes #6804 Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6809)
-
Matt Caswell authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6815)
-
Matt Caswell authored
Fixes #6646 Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6815)
-
Matt Caswell authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6815)
-
Matt Caswell authored
Some EC functions exist in *_GFp and *_GF2m forms, in spite of the implementations between the two curve types being identical. This commit provides equivalent generic functions with the *_GFp and *_GF2m forms just calling the generic functions. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6815)
-
Pauli authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6823)
-
Pauli authored
Also streamline the code by relying on ASN1_INTEGER_to_BN to allocate the BN instead of doing it separately. Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6821)
-
- 29 Jul, 2018 3 commits
-
-
Beat Bolli authored
into an existing source file: the function is static, and the code doesn't include dsa.h. Match the generated C source style of dsaparam. Adjust apps/dhparam.c to match, and rename the BIGNUMs to their more usual single-letter names. Add an error return in the generated C source. both: simplify the callback function Signed-off-by:
Beat Bolli <dev@drbeat.li> Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/6797)
-
Bryan Donlan authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6749)
-
Bryan Donlan authored
FIPS 186-4 does not specify a hard requirement on DSA digest lengths, and in any case the current check rejects the FIPS recommended digest lengths for key sizes != 1024 bits. Fixes: #6748 Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6749)
-
- 28 Jul, 2018 1 commit
-
-
Beat Bolli authored
This here page only documents the callback values 0 to 2, but the callers of BN_generate_prime_ex() call it with the value 3. The list of manual pages in the SEE ALSO section was extended with the output from git grep BN_GENCB_call.*[3-9] while in the doc/man3 directory. Signed-off-by:
Beat Bolli <dev@drbeat.li> Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6802)
-
- 26 Jul, 2018 11 commits
-
-
Benjamin Kaduk authored
Commit 1c4aa31d changed how we process and store SNI information during the handshake, so that a hostname is only saved in the SSL_SESSION structure if that SNI value has actually been negotiated. SSL_get_servername() was adjusted to match, with a new conditional being added to handle the case when the handshake processing is ongoing, and a different location should be consulted for the offered SNI value. This was done in an attempt to preserve the historical behavior of SSL_get_servername(), a function whose behavior only mostly matches its documentation, and whose documentation is both lacking and does not necessarily reflect the actual desired behavior for such an API. Unfortunately, sweeping changes that would bring more sanity to this space are not possible until OpenSSL 1.2.0, for ABI compatibility reasons, so we must attempt to maintain the existing behavior to the extent possible. The above-mentioned commit did not take into account the behavior of SSL_get_servername() during resumption handshakes for TLS 1.2 and prior, where no SNI negotiation is performed. In that case we would not properly parse the incoming SNI and erroneously return NULL as the servername, when instead the logical session is associated with the SNI value cached in the SSL_SESSION. (Note that in some cases an SNI callback may not need to do anything in a TLS 1.2 or prior resumption flow, but we are calling the callbacks and did not provide any guidance that they should no-op if the connection is being resumed, so we must handle this case in a usable fashion.) Update our behavior accordingly to return the session's cached value during the handshake, when resuming. This fixes the boringssl tests. [extended tests] Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6792)
-
Benjamin Kaduk authored
To start with, actually set an SNI callback (copied from bssl_shim); we weren't actually testing much otherwise (and just happened to have been passing due to buggy libssl behavior prior to commit 1c4aa31d ). Also use proper C++ code for handling C strings -- when a C API (SSL_get_servername()) returns NULL instead of a string, special-case that instead of blindly trying to compare NULL against a std::string, and perform the comparsion using the std::string operators instead of falling back to pointer comparison. Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6792)
-
Billy Brumley authored
This commit leverages the Montgomery ladder scaffold introduced in #6690 (alongside a specialized Lopez-Dahab ladder for binary curves) to provide a specialized differential addition-and-double implementation to speedup prime curves, while keeping all the features of `ec_scalar_mul_ladder` against SCA attacks. The arithmetic in ladder_pre, ladder_step and ladder_post is auto generated with tooling, from the following formulae: - `ladder_pre`: Formula 3 for doubling from Izu-Takagi "A fast parallel elliptic curve multiplication resistant against side channel attacks", as described at https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#doubling-dbl-2002-it-2 - `ladder_step`: differential addition-and-doubling Eq. (8) and (10) from Izu-Takagi "A fast parallel elliptic curve multiplication resistant against side channel attacks", as described at https://hyperelliptic.org/EFD/g1p/auto-shortw-xz.html#ladder-ladd-2002-it-3 - `ladder_post`: y-coordinate recovery using Eq. (8) from Brier-Joye "Weierstrass Elliptic Curves and Side-Channel Attacks", modified to work in projective coordinates. Co-authored-by:
Nicola Tuveri <nic.tuv@gmail.com> Reviewed-by:
Andy Polyakov <appro@openssl.org> Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6772)
-
Andy Polyakov authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6782)
-
Andy Polyakov authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6782)
-
Andy Polyakov authored
New implementation failed to correctly reset r->neg flag. Spotted by OSSFuzz. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6783)
-
Andy Polyakov authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Kurt Roeckx authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> GH: #6794
-
Paul Yang authored
Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> Reviewed-by:
Andy Polyakov <appro@openssl.org> GH: #6787
-
Kurt Roeckx authored
The old numbers where all generated for an 80 bit security level. But the number should depend on security level you want to reach. For bigger primes we want a higher security level and so need to do more tests. Reviewed-by:
Richard Levitte <levitte@openssl.org> Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> GH: #6075 Fixes: #6012
-
Kurt Roeckx authored
This changes the security level from 100 to 128 bit. We only have 1 define, this sets it to the highest level supported for DSA, and needed for keys larger than 3072 bit. Reviewed-by:
Richard Levitte <levitte@openssl.org> Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> GH: #6075
-
- 25 Jul, 2018 9 commits
-
-
Shane Lontis authored
Reviewed-by:
Paul Dale <paul.dale@oracle.com> Reviewed-by:
Tim Hudson <tjh@openssl.org> Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> (Merged from https://github.com/openssl/openssl/pull/6778)
-
Rich Salz authored
Thanks to Jiecheng Wu, Zuxing Gu for the report. Reviewed-by:
Andy Polyakov <appro@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6791)
-
Andy Polyakov authored
Problem was that Windows threads that were terminating before libcrypto was initialized were referencing uninitialized or possibly even unrelated thread local storage index. Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/6752)
-
Andy Polyakov authored
Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/6752)
-
Andy Polyakov authored
Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/6752)
-
Andy Polyakov authored
Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/6752)
-
Andy Polyakov authored
Reviewed-by:
Richard Levitte <levitte@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6773)
-
Andy Polyakov authored
|ctx| recently became unconditionally non-NULL and is already dereferenced earlier. Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
Andy Polyakov authored
Reviewed-by:
Rich Salz <rsalz@openssl.org>
-
- 24 Jul, 2018 3 commits
-
-
Richard Levitte authored
This is done by calling die again, just make sure to reset the __DIE__ handler first. Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6776)
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6776)
-
Richard Levitte authored
Reviewed-by:
Rich Salz <rsalz@openssl.org> (Merged from https://github.com/openssl/openssl/pull/6776)
-