"git@forge.etsi.org:nfv/api-tests.git" did not exist on "313a00fdc644c7b620dc6bb8b03d64759ff666c3"
Newer
Older
*) New option -sigopt to dgst utility. Update dgst to use
EVP_Digest{Sign,Verify}*. These two changes make it possible to use
alternative signing parameters such as X9.31 or PSS in the dgst
utility.
[Steve Henson]
*) Change ssl_cipher_apply_rule(), the internal function that does
the work each time a ciphersuite string requests enabling
("foo+bar"), moving ("+foo+bar"), disabling ("-foo+bar", or
removing ("!foo+bar") a class of ciphersuites: Now it maintains
the order of disabled ciphersuites such that those ciphersuites
that most recently went from enabled to disabled not only stay
in order with respect to each other, but also have higher priority
than other disabled ciphersuites the next time ciphersuites are
enabled again.
This means that you can now say, e.g., "PSK:-PSK:HIGH" to enable
the same ciphersuites as with "HIGH" alone, but in a specific
order where the PSK ciphersuites come first (since they are the
most recently disabled ciphersuites when "HIGH" is parsed).
Also, change ssl_create_cipher_list() (using this new
functionality) such that between otherwise identical
ciphersuites, ephemeral ECDH is preferred over ephemeral DH in
the default order.
[Bodo Moeller]
*) Change ssl_create_cipher_list() so that it automatically
arranges the ciphersuites in reasonable order before starting
to process the rule string. Thus, the definition for "DEFAULT"
(SSL_DEFAULT_CIPHER_LIST) now is just "ALL:!aNULL:!eNULL", but
remains equivalent to "AES:ALL:!aNULL:!eNULL:+aECDH:+kRSA:+RC4:@STRENGTH".
This makes it much easier to arrive at a reasonable default order
in applications for which anonymous ciphers are OK (meaning
that you can't actually use DEFAULT).
[Bodo Moeller; suggested by Victor Duchovni]
4038
4039
4040
4041
4042
4043
4044
4045
4046
4047
4048
4049
4050
4051
4052
4053
4054
4055
4056
4057
4058
4059
*) Split the SSL/TLS algorithm mask (as used for ciphersuite string
processing) into multiple integers instead of setting
"SSL_MKEY_MASK" bits, "SSL_AUTH_MASK" bits, "SSL_ENC_MASK",
"SSL_MAC_MASK", and "SSL_SSL_MASK" bits all in a single integer.
(These masks as well as the individual bit definitions are hidden
away into the non-exported interface ssl/ssl_locl.h, so this
change to the definition of the SSL_CIPHER structure shouldn't
affect applications.) This give us more bits for each of these
categories, so there is no longer a need to coagulate AES128 and
AES256 into a single algorithm bit, and to coagulate Camellia128
and Camellia256 into a single algorithm bit, which has led to all
kinds of kludges.
Thus, among other things, the kludge introduced in 0.9.7m and
0.9.8e for masking out AES256 independently of AES128 or masking
out Camellia256 independently of AES256 is not needed here in 0.9.9.
With the change, we also introduce new ciphersuite aliases that
so far were missing: "AES128", "AES256", "CAMELLIA128", and
"CAMELLIA256".
[Bodo Moeller]
*) Add support for dsa-with-SHA224 and dsa-with-SHA256.
Use the leftmost N bytes of the signature input if the input is
larger than the prime q (with N being the size in bytes of q).
[Nils Larsch]
*) Very *very* experimental PKCS#7 streaming encoder support. Nothing uses
it yet and it is largely untested.
[Steve Henson]
*) Add support for the ecdsa-with-SHA224/256/384/512 signature types.
[Nils Larsch]
*) Initial incomplete changes to avoid need for function casts in OpenSSL
Dr. Stephen Henson
committed
some compilers (gcc 4.2 and later) reject their use. Safestack is
reimplemented. Update ASN1 to avoid use of legacy functions.
[Steve Henson]
*) Win32/64 targets are linked with Winsock2.
[Andy Polyakov]
*) Add an X509_CRL_METHOD structure to allow CRL processing to be redirected
to external functions. This can be used to increase CRL handling
efficiency especially when CRLs are very large by (for example) storing
the CRL revoked certificates in a database.
[Steve Henson]
*) Overhaul of by_dir code. Add support for dynamic loading of CRLs so
new CRLs added to a directory can be used. New command line option
-verify_return_error to s_client and s_server. This causes real errors
to be returned by the verify callback instead of carrying on no matter
what. This reflects the way a "real world" verify callback would behave.
[Steve Henson]
*) GOST engine, supporting several GOST algorithms and public key formats.
Kindly donated by Cryptocom.
[Cryptocom]
*) Partial support for Issuing Distribution Point CRL extension. CRLs
partitioned by DP are handled but no indirect CRL or reason partitioning
(yet). Complete overhaul of CRL handling: now the most suitable CRL is
selected via a scoring technique which handles IDP and AKID in CRLs.
[Steve Henson]
*) New X509_STORE_CTX callbacks lookup_crls() and lookup_certs() which
will ultimately be used for all verify operations: this will remove the
X509_STORE dependency on certificate verification and allow alternative
lookup methods. X509_STORE based implementations of these two callbacks.
[Steve Henson]
*) Allow multiple CRLs to exist in an X509_STORE with matching issuer names.
Modify get_crl() to find a valid (unexpired) CRL if possible.
[Steve Henson]
*) New function X509_CRL_match() to check if two CRLs are identical. Normally
this would be called X509_CRL_cmp() but that name is already used by
a function that just compares CRL issuer names. Cache several CRL
extensions in X509_CRL structure and cache CRLDP in X509.
[Steve Henson]
Dr. Stephen Henson
committed
*) Store a "canonical" representation of X509_NAME structure (ASN1 Name)
this maps equivalent X509_NAME structures into a consistent structure.
Name comparison can then be performed rapidly using memcmp().
[Steve Henson]
*) Non-blocking OCSP request processing. Add -timeout option to ocsp
*) Allow digests to supply their own micalg string for S/MIME type using
the ctrl EVP_MD_CTRL_MICALG.
[Steve Henson]
*) During PKCS7 signing pass the PKCS7 SignerInfo structure to the
EVP_PKEY_METHOD before and after signing via the EVP_PKEY_CTRL_PKCS7_SIGN
ctrl. It can then customise the structure before and/or after signing
if necessary.
[Steve Henson]
*) New function OBJ_add_sigid() to allow application defined signature OIDs
to be added to OpenSSLs internal tables. New function OBJ_sigid_free()
to free up any added signature OIDs.
[Steve Henson]
*) New functions EVP_CIPHER_do_all(), EVP_CIPHER_do_all_sorted(),
EVP_MD_do_all() and EVP_MD_do_all_sorted() to enumerate internal
digest and cipher tables. New options added to openssl utility:
list-message-digest-algorithms and list-cipher-algorithms.
[Steve Henson]
*) Change the array representation of binary polynomials: the list
of degrees of non-zero coefficients is now terminated with -1.
Previously it was terminated with 0, which was also part of the
value; thus, the array representation was not applicable to
polynomials where t^0 has coefficient zero. This change makes
the array representation useful in a more general context.
[Douglas Stebila]
4157
4158
4159
4160
4161
4162
4163
4164
4165
4166
4167
4168
4169
4170
4171
4172
4173
4174
4175
4176
4177
4178
4179
4180
4181
4182
4183
4184
4185
4186
4187
4188
4189
*) Various modifications and fixes to SSL/TLS cipher string
handling. For ECC, the code now distinguishes between fixed ECDH
with RSA certificates on the one hand and with ECDSA certificates
on the other hand, since these are separate ciphersuites. The
unused code for Fortezza ciphersuites has been removed.
For consistency with EDH, ephemeral ECDH is now called "EECDH"
(not "ECDHE"). For consistency with the code for DH
certificates, use of ECDH certificates is now considered ECDH
authentication, not RSA or ECDSA authentication (the latter is
merely the CA's signing algorithm and not actively used in the
protocol).
The temporary ciphersuite alias "ECCdraft" is no longer
available, and ECC ciphersuites are no longer excluded from "ALL"
and "DEFAULT". The following aliases now exist for RFC 4492
ciphersuites, most of these by analogy with the DH case:
kECDHr - ECDH cert, signed with RSA
kECDHe - ECDH cert, signed with ECDSA
kECDH - ECDH cert (signed with either RSA or ECDSA)
kEECDH - ephemeral ECDH
ECDH - ECDH cert or ephemeral ECDH
aECDH - ECDH cert
aECDSA - ECDSA cert
ECDSA - ECDSA cert
AECDH - anonymous ECDH
EECDH - non-anonymous ephemeral ECDH (equivalent to "kEECDH:-AECDH")
[Bodo Moeller]
Dr. Stephen Henson
committed
*) Add additional S/MIME capabilities for AES and GOST ciphers if supported.
Use correct micalg parameters depending on digest(s) in signed message.
[Steve Henson]
*) Add engine support for EVP_PKEY_ASN1_METHOD. Add functions to process
an ENGINE asn1 method. Support ENGINE lookups in the ASN1 code.
[Steve Henson]
*) Initial engine support for EVP_PKEY_METHOD. New functions to permit
an engine to register a method. Add ENGINE lookups for methods and
functional reference processing.
[Steve Henson]
*) New functions EVP_Digest{Sign,Verify)*. These are enhanced versions of
EVP_{Sign,Verify}* which allow an application to customise the signature
process.
[Steve Henson]
*) New -resign option to smime utility. This adds one or more signers
to an existing PKCS#7 signedData structure. Also -md option to use an
alternative message digest algorithm for signing.
[Steve Henson]
*) Tidy up PKCS#7 routines and add new functions to make it easier to
create PKCS7 structures containing multiple signers. Update smime
application to support multiple signers.
[Steve Henson]
*) New -macalg option to pkcs12 utility to allow setting of an alternative
digest MAC.
[Steve Henson]
*) Initial support for PKCS#5 v2.0 PRFs other than default SHA1 HMAC.
Dr. Stephen Henson
committed
Reorganize PBE internals to lookup from a static table using NIDs,
add support for HMAC PBE OID translation. Add a EVP_CIPHER ctrl:
EVP_CTRL_PBE_PRF_NID this allows a cipher to specify an alternative
PRF which will be automatically used with PBES2.
[Steve Henson]
*) Replace the algorithm specific calls to generate keys in "req" with the
new API.
[Steve Henson]
*) Update PKCS#7 enveloped data routines to use new API. This is now
supported by any public key method supporting the encrypt operation. A
ctrl is added to allow the public key algorithm to examine or modify
the PKCS#7 RecipientInfo structure if it needs to: for RSA this is
a no op.
[Steve Henson]
*) Add a ctrl to asn1 method to allow a public key algorithm to express
a default digest type to use. In most cases this will be SHA1 but some
algorithms (such as GOST) need to specify an alternative digest. The
return value indicates how strong the preference is 1 means optional and
2 is mandatory (that is it is the only supported type). Modify
ASN1_item_sign() to accept a NULL digest argument to indicate it should
use the default md. Update openssl utilities to use the default digest
type for signing if it is not explicitly indicated.
[Steve Henson]
*) Use OID cross reference table in ASN1_sign() and ASN1_verify(). New
EVP_MD flag EVP_MD_FLAG_PKEY_METHOD_SIGNATURE. This uses the relevant
signing method from the key type. This effectively removes the link
between digests and public key types.
[Steve Henson]
*) Add an OID cross reference table and utility functions. Its purpose is to
translate between signature OIDs such as SHA1WithrsaEncryption and SHA1,
rsaEncryption. This will allow some of the algorithm specific hackery
needed to use the correct OID to be removed.
*) Remove algorithm specific dependencies when setting PKCS7_SIGNER_INFO
structures for PKCS7_sign(). They are now set up by the relevant public
key ASN1 method.
[Steve Henson]
*) Add provisional EC pkey method with support for ECDSA and ECDH.
[Steve Henson]
*) Add support for key derivation (agreement) in the API, DH method and
pkeyutl.
[Steve Henson]
*) Add DSA pkey method and DH pkey methods, extend DH ASN1 method to support
public and private key formats. As a side effect these add additional
command line functionality not previously available: DSA signatures can be
generated and verified using pkeyutl and DH key support and generation in
pkey, genpkey.
[Steve Henson]
*) BeOS support.
[Oliver Tappe <zooey@hirschkaefer.de>]
*) New make target "install_html_docs" installs HTML renditions of the
manual pages.
[Oliver Tappe <zooey@hirschkaefer.de>]
*) New utility "genpkey" this is analogous to "genrsa" etc except it can
generate keys for any algorithm. Extend and update EVP_PKEY_METHOD to
support key and parameter generation and add initial key generation
functionality for RSA.
[Steve Henson]
*) Add functions for main EVP_PKEY_method operations. The undocumented
functions EVP_PKEY_{encrypt,decrypt} have been renamed to
[Steve Henson]
Dr. Stephen Henson
committed
*) Initial definitions for EVP_PKEY_METHOD. This will be a high level public
key API, doesn't do much yet.
[Steve Henson]
Dr. Stephen Henson
committed
*) New function EVP_PKEY_asn1_get0_info() to retrieve information about
public key algorithms. New option to openssl utility:
"list-public-key-algorithms" to print out info.
[Steve Henson]
*) Implement the Supported Elliptic Curves Extension for
ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
[Douglas Stebila]
*) Don't free up OIDs in OBJ_cleanup() if they are in use by EVP_MD or
EVP_CIPHER structures to avoid later problems in EVP_cleanup().
[Steve Henson]
*) New utilities pkey and pkeyparam. These are similar to algorithm specific
utilities such as rsa, dsa, dsaparam etc except they process any key
type.
*) Transfer public key printing routines to EVP_PKEY_ASN1_METHOD. New
functions EVP_PKEY_print_public(), EVP_PKEY_print_private(),
EVP_PKEY_print_param() to print public key data from an EVP_PKEY
structure.
[Steve Henson]
Dr. Stephen Henson
committed
*) Initial support for pluggable public key ASN1.
De-spaghettify the public key ASN1 handling. Move public and private
key ASN1 handling to a new EVP_PKEY_ASN1_METHOD structure. Relocate
algorithm specific handling to a single module within the relevant
algorithm directory. Add functions to allow (near) opaque processing
of public and private key structures.
[Steve Henson]
*) Implement the Supported Point Formats Extension for
ECC ciphersuites from draft-ietf-tls-ecc-12.txt.
[Douglas Stebila]
*) Add initial support for RFC 4279 PSK TLS ciphersuites. Add members
for the psk identity [hint] and the psk callback functions to the
SSL_SESSION, SSL and SSL_CTX structure.
New ciphersuites:
PSK-RC4-SHA, PSK-3DES-EDE-CBC-SHA, PSK-AES128-CBC-SHA,
PSK-AES256-CBC-SHA
New functions:
SSL_CTX_use_psk_identity_hint
SSL_get_psk_identity_hint
SSL_get_psk_identity
SSL_use_psk_identity_hint
[Mika Kousa and Pasi Eronen of Nokia Corporation]
*) Add RFC 3161 compliant time stamp request creation, response generation
and response verification functionality.
[Zoltán Glózik <zglozik@opentsa.org>, The OpenTSA Project]
*) Add initial support for TLS extensions, specifically for the server_name
extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
have new members for a host name. The SSL data structure has an
additional member SSL_CTX *initial_ctx so that new sessions can be
stored in that context to allow for session resumption, even after the
SSL has been switched to a new SSL_CTX in reaction to a client's
server_name extension.
New functions (subject to change):
SSL_get_servername()
SSL_get_servername_type()
SSL_set_SSL_CTX()
New CTRL codes and macros (subject to change):
SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
- SSL_CTX_set_tlsext_servername_callback()
SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
- SSL_CTX_set_tlsext_servername_arg()
openssl s_client has a new '-servername ...' option.
openssl s_server has new options '-servername_host ...', '-cert2 ...',
'-key2 ...', '-servername_fatal' (subject to change). This allows
testing the HostName extension for a specific single host name ('-cert'
and '-key' remain fallbacks for handshakes without HostName
negotiation). If the unrecognized_name alert has to be sent, this by
default is a warning; it becomes fatal with the '-servername_fatal'
option.
[Peter Sylvester, Remy Allais, Christophe Renou]
*) Whirlpool hash implementation is added.
[Andy Polyakov]
*) BIGNUM code on 64-bit SPARCv9 targets is switched from bn(64,64) to
bn(64,32). Because of instruction set limitations it doesn't have
any negative impact on performance. This was done mostly in order
to make it possible to share assembler modules, such as bn_mul_mont
implementations, between 32- and 64-bit builds without hassle.
[Andy Polyakov]
*) Move code previously exiled into file crypto/ec/ec2_smpt.c
to ec2_smpl.c, and no longer require the OPENSSL_EC_BIN_PT_COMP
macro.
[Bodo Moeller]
*) New candidate for BIGNUM assembler implementation, bn_mul_mont,
dedicated Montgomery multiplication procedure, is introduced.
BN_MONT_CTX is modified to allow bn_mul_mont to reach for higher
"64-bit" performance on certain 32-bit targets.
[Andy Polyakov]
*) New option SSL_OP_NO_COMP to disable use of compression selectively
in SSL structures. New SSL ctrl to set maximum send fragment size.
Save memory by setting the I/O buffer sizes dynamically instead of
using the maximum available value.
[Steve Henson]
*) New option -V for 'openssl ciphers'. This prints the ciphersuite code
in addition to the text details.
[Bodo Moeller]
*) Very, very preliminary EXPERIMENTAL support for printing of general
ASN1 structures. This currently produces rather ugly output and doesn't
handle several customised structures at all.
[Steve Henson]
*) Integrated support for PVK file format and some related formats such
as MS PUBLICKEYBLOB and PRIVATEKEYBLOB. Command line switches to support
these in the 'rsa' and 'dsa' utilities.
[Steve Henson]
*) Support for PKCS#1 RSAPublicKey format on rsa utility command line.
[Steve Henson]
*) Remove the ancient ASN1_METHOD code. This was only ever used in one
place for the (very old) "NETSCAPE" format certificates which are now
handled using new ASN1 code equivalents.
*) Let the TLSv1_method() etc. functions return a 'const' SSL_METHOD
pointer and make the SSL_METHOD parameter in SSL_CTX_new,
SSL_CTX_set_ssl_version and SSL_set_ssl_method 'const'.
[Nils Larsch]
Dr. Stephen Henson
committed
*) Modify CRL distribution points extension code to print out previously
unsupported fields. Enhance extension setting code to allow setting of
all fields.
Dr. Stephen Henson
committed
[Steve Henson]
*) Add print and set support for Issuing Distribution Point CRL extension.
*) Change 'Configure' script to enable Camellia by default.
[NTT]
Changes between 0.9.8m and 0.9.8n [24 Mar 2010]
*) When rejecting SSL/TLS records due to an incorrect version number, never
update s->server with a new major version number. As of
- OpenSSL 0.9.8m if 'short' is a 16-bit type,
- OpenSSL 0.9.8f if 'short' is longer than 16 bits,
the previous behavior could result in a read attempt at NULL when
receiving specific incorrect SSL/TLS records once record payload
protection is active. (CVE-2010-0740)
[Bodo Moeller, Adam Langley <agl@chromium.org>]
*) Fix for CVE-2010-0433 where some kerberos enabled versions of OpenSSL
could be crashed if the relevant tables were not present (e.g. chrooted).
[Tomas Hoger <thoger@redhat.com>]
Changes between 0.9.8l and 0.9.8m [25 Feb 2010]
*) Always check bn_wexpand() return values for failure. (CVE-2009-3245)
[Martin Olsson, Neel Mehta]
*) Fix X509_STORE locking: Every 'objs' access requires a lock (to
accommodate for stack sorting, always a write lock!).
[Bodo Moeller]
*) On some versions of WIN32 Heap32Next is very slow. This can cause
excessive delays in the RAND_poll(): over a minute. As a workaround
include a time check in the inner Heap32Next loop too.
[Steve Henson]
*) The code that handled flushing of data in SSL/TLS originally used the
BIO_CTRL_INFO ctrl to see if any data was pending first. This caused
the problem outlined in PR#1949. The fix suggested there however can
trigger problems with buggy BIO_CTRL_WPENDING (e.g. some versions
of Apache). So instead simplify the code to flush unconditionally.
This should be fine since flushing with no data to flush is a no op.
[Steve Henson]
*) Handle TLS versions 2.0 and later properly and correctly use the
highest version of TLS/SSL supported. Although TLS >= 2.0 is some way
off ancient servers have a habit of sticking around for a while...
[Steve Henson]
Dr. Stephen Henson
committed
*) Modify compression code so it frees up structures without using the
ex_data callbacks. This works around a problem where some applications
call CRYPTO_cleanup_all_ex_data() before application exit (e.g. when
Dr. Stephen Henson
committed
restarting) then use compression (e.g. SSL with compression) later.
This results in significant per-connection memory leaks and
has caused some security issues including CVE-2008-1678 and
CVE-2009-4355.
[Steve Henson]
*) Constify crypto/cast (i.e., <openssl/cast.h>): a CAST_KEY doesn't
change when encrypting or decrypting.
[Bodo Moeller]
*) Add option SSL_OP_LEGACY_SERVER_CONNECT which will allow clients to
connect and renegotiate with servers which do not support RI.
Until RI is more widely deployed this option is enabled by default.
[Steve Henson]
*) Add "missing" ssl ctrls to clear options and mode.
[Steve Henson]
*) If client attempts to renegotiate and doesn't support RI respond with
a no_renegotiation alert as required by RFC5746. Some renegotiating
TLS clients will continue a connection gracefully when they receive
the alert. Unfortunately OpenSSL mishandled this alert and would hang
waiting for a server hello which it will never receive. Now we treat a
received no_renegotiation alert as a fatal error. This is because
applications requesting a renegotiation might well expect it to succeed
and would have no code in place to handle the server denying it so the
only safe thing to do is to terminate the connection.
[Steve Henson]
Dr. Stephen Henson
committed
*) Add ctrl macro SSL_get_secure_renegotiation_support() which returns 1 if
peer supports secure renegotiation and 0 otherwise. Print out peer
renegotiation support in s_client/s_server.
[Steve Henson]
*) Replace the highly broken and deprecated SPKAC certification method with
the updated NID creation version. This should correctly handle UTF8.
[Steve Henson]
*) Implement RFC5746. Re-enable renegotiation but require the extension
as needed. Unfortunately, SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION
turns out to be a bad idea. It has been replaced by
SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION which can be set with
SSL_CTX_set_options(). This is really not recommended unless you
know what you are doing.
Dr. Stephen Henson
committed
[Eric Rescorla <ekr@networkresonance.com>, Ben Laurie, Steve Henson]
*) Fixes to stateless session resumption handling. Use initial_ctx when
issuing and attempting to decrypt tickets in case it has changed during
servername handling. Use a non-zero length session ID when attempting
stateless session resumption: this makes it possible to determine if
a resumption has occurred immediately after receiving server hello
(several places in OpenSSL subtly assume this) instead of later in
the handshake.
[Steve Henson]
*) The functions ENGINE_ctrl(), OPENSSL_isservice(),
CMS_get1_RecipientRequest() and RAND_bytes() can return <=0 on error
fixes for a few places where the return code is not checked
correctly.
[Julia Lawall <julia@diku.dk>]
Dr. Stephen Henson
committed
*) Add --strict-warnings option to Configure script to include devteam
warnings in other configurations.
[Steve Henson]
*) Add support for --libdir option and LIBDIR variable in makefiles. This
makes it possible to install openssl libraries in locations which
have names other than "lib", for example "/usr/lib64" which some
systems need.
[Steve Henson, based on patch from Jeremy Utley]
*) Don't allow the use of leading 0x80 in OIDs. This is a violation of
X690 8.9.12 and can produce some misleading textual output of OIDs.
[Steve Henson, reported by Dan Kaminsky]
*) Delete MD2 from algorithm tables. This follows the recommendation in
several standards that it is not used in new applications due to
several cryptographic weaknesses. For binary compatibility reasons
the MD2 API is still compiled in by default.
[Steve Henson]
*) Add compression id to {d2i,i2d}_SSL_SESSION so it is correctly saved
and restored.
[Steve Henson]
*) Rename uni2asc and asc2uni functions to OPENSSL_uni2asc and
OPENSSL_asc2uni conditionally on Netware platforms to avoid a name
clash.
[Guenter <lists@gknw.net>]
*) Fix the server certificate chain building code to use X509_verify_cert(),
it used to have an ad-hoc builder which was unable to cope with anything
other than a simple chain.
[David Woodhouse <dwmw2@infradead.org>, Steve Henson]
*) Don't check self signed certificate signatures in X509_verify_cert()
by default (a flag can override this): it just wastes time without
adding any security. As a useful side effect self signed root CAs
with non-FIPS digests are now usable in FIPS mode.
*) In dtls1_process_out_of_seq_message() the check if the current message
is already buffered was missing. For every new message was memory
allocated, allowing an attacker to perform an denial of service attack
with sending out of seq handshake messages until there is no memory
left. Additionally every future message was buffered, even if the
sequence number made no sense and would be part of another handshake.
So only messages with sequence numbers less than 10 in advance will be
buffered. (CVE-2009-1378)
[Robin Seggelmann, discovered by Daniel Mentz]
*) Records are buffered if they arrive with a future epoch to be
processed after finishing the corresponding handshake. There is
currently no limitation to this buffer allowing an attacker to perform
a DOS attack with sending records with future epochs until there is no
memory left. This patch adds the pqueue_size() function to determine
the size of a buffer and limits the record buffer to 100 entries.
(CVE-2009-1377)
[Robin Seggelmann, discovered by Daniel Mentz]
*) Keep a copy of frag->msg_header.frag_len so it can be used after the
parent structure is freed. (CVE-2009-1379)
*) Handle non-blocking I/O properly in SSL_shutdown() call.
[Darryl Miles <darryl-mailinglists@netbauds.net>]
*) Add 2.5.4.* OIDs
[Ilya O. <vrghost@gmail.com>]
Changes between 0.9.8k and 0.9.8l [5 Nov 2009]
*) Disable renegotiation completely - this fixes a severe security
problem (CVE-2009-3555) at the cost of breaking all
renegotiation. Renegotiation can be re-enabled by setting
SSL3_FLAGS_ALLOW_UNSAFE_LEGACY_RENEGOTIATION in s3->flags at
run-time. This is really not recommended unless you know what
you're doing.
[Ben Laurie]
*) Don't set val to NULL when freeing up structures, it is freed up by
underlying code. If sizeof(void *) > sizeof(long) this can result in
zeroing past the valid field. (CVE-2009-0789)
[Paolo Ganci <Paolo.Ganci@AdNovum.CH>]
*) Fix bug where return value of CMS_SignerInfo_verify_content() was not
checked correctly. This would allow some invalid signed attributes to
appear to verify correctly. (CVE-2009-0591)
[Ivan Nestlerode <inestlerode@us.ibm.com>]
*) Reject UniversalString and BMPString types with invalid lengths. This
prevents a crash in ASN1_STRING_print_ex() which assumes the strings have
a legal length. (CVE-2009-0590)
[Steve Henson]
*) Set S/MIME signing as the default purpose rather than setting it
unconditionally. This allows applications to override it at the store
level.
[Steve Henson]
*) Permit restricted recursion of ASN1 strings. This is needed in practice
to handle some structures.
[Steve Henson]
*) Improve efficiency of mem_gets: don't search whole buffer each time
for a '\n'
[Jeremy Shapiro <jnshapir@us.ibm.com>]
*) New -hex option for openssl rand.
[Matthieu Herrb]
*) Print out UTF8String and NumericString when parsing ASN1.
[Steve Henson]
*) Support NumericString type for name components.
[Steve Henson]
*) Allow CC in the environment to override the automatically chosen
compiler. Note that nothing is done to ensure flags work with the
chosen compiler.
[Ben Laurie]
Changes between 0.9.8i and 0.9.8j [07 Jan 2009]
*) Properly check EVP_VerifyFinal() and similar return values
(CVE-2008-5077).
[Ben Laurie, Bodo Moeller, Google Security Team]
*) Enable TLS extensions by default.
[Ben Laurie]
*) Allow the CHIL engine to be loaded, whether the application is
multithreaded or not. (This does not release the developer from the
obligation to set up the dynamic locking callbacks.)
[Sander Temme <sander@temme.net>]
*) Use correct exit code if there is an error in dgst command.
[Steve Henson; problem pointed out by Roland Dirlewanger]
*) Tweak Configure so that you need to say "experimental-jpake" to enable
JPAKE, and need to use -DOPENSSL_EXPERIMENTAL_JPAKE in applications.
[Bodo Moeller]
*) Add experimental JPAKE support, including demo authentication in
s_client and s_server.
*) Set the comparison function in v3_addr_canonize().
[Rob Austein <sra@hactrn.net>]
*) Add support for XMPP STARTTLS in s_client.
[Philip Paeps <philip@freebsd.org>]
*) Change the server-side SSL_OP_NETSCAPE_REUSE_CIPHER_CHANGE_BUG behavior
to ensure that even with this option, only ciphersuites in the
server's preference list will be accepted. (Note that the option
applies only when resuming a session, so the earlier behavior was
just about the algorithm choice for symmetric cryptography.)
[Bodo Moeller]
Changes between 0.9.8h and 0.9.8i [15 Sep 2008]
*) Fix NULL pointer dereference if a DTLS server received
ChangeCipherSpec as first record (CVE-2009-1386).
[PR #1679]
*) Fix a state transition in s3_srvr.c and d1_srvr.c
(was using SSL3_ST_CW_CLNT_HELLO_B, should be ..._ST_SW_SRVR_...).
[Nagendra Modadugu]
*) The fix in 0.9.8c that supposedly got rid of unsafe
double-checked locking was incomplete for RSA blinding,
addressing just one layer of what turns out to have been
doubly unsafe triple-checked locking.
So now fix this for real by retiring the MONT_HELPER macro
in crypto/rsa/rsa_eay.c.
[Bodo Moeller; problem pointed out by Marius Schilder]
*) Various precautionary measures:
- Avoid size_t integer overflow in HASH_UPDATE (md32_common.h).
- Avoid a buffer overflow in d2i_SSL_SESSION() (ssl_asn1.c).
(NB: This would require knowledge of the secret session ticket key
to exploit, in which case you'd be SOL either way.)
- Change bn_nist.c so that it will properly handle input BIGNUMs
outside the expected range.
- Enforce the 'num' check in BN_div() (bn_div.c) for non-BN_DEBUG
builds.
[Neel Mehta, Bodo Moeller]
*) Allow engines to be "soft loaded" - i.e. optionally don't die if
the load fails. Useful for distros.
[Ben Laurie and the FreeBSD team]
*) Add support for Local Machine Keyset attribute in PKCS#12 files.
[Steve Henson]
*) Fix BN_GF2m_mod_arr() top-bit cleanup code.
[Huang Ying]
*) Expand ENGINE to support engine supplied SSL client certificate functions.
*) Add CryptoAPI ENGINE to support use of RSA and DSA keys held in Windows
keystores. Support for SSL/TLS client authentication too.
Not compiled unless enable-capieng specified to Configure.
*) Fix bug in X509_ATTRIBUTE creation: don't set attribute using
ASN1_TYPE_set1 if MBSTRING flag set. This bug would crash certain
attribute creation routines such as certificate requests and PKCS#12
files.
[Steve Henson]
*) Fix flaw if 'Server Key exchange message' is omitted from a TLS
handshake which could lead to a client crash as found using the
Codenomicon TLS test suite (CVE-2008-1672)
*) Fix double free in TLS server name extensions which could lead to
a remote crash found by Codenomicon TLS test suite (CVE-2008-0891)
*) Clear error queue in SSL_CTX_use_certificate_chain_file()
Clear the error queue to ensure that error entries left from
older function calls do not interfere with the correct operation.
[Lutz Jaenicke, Erik de Castro Lopo]
*) Remove root CA certificates of commercial CAs:
The OpenSSL project does not recommend any specific CA and does not
have any policy with respect to including or excluding any CA.
Therefore it does not make any sense to ship an arbitrary selection
of root CA certificates with the OpenSSL software.
[Lutz Jaenicke]
*) RSA OAEP patches to fix two separate invalid memory reads.
The first one involves inputs when 'lzero' is greater than
'SHA_DIGEST_LENGTH' (it would read about SHA_DIGEST_LENGTH bytes
before the beginning of from). The second one involves inputs where
the 'db' section contains nothing but zeroes (there is a one-byte
invalid read after the end of 'db').
*) Partial backport from 0.9.9-dev:
Introduce bn_mul_mont (dedicated Montgomery multiplication
procedure) as a candidate for BIGNUM assembler implementation.
While 0.9.9-dev uses assembler for various architectures, only
x86_64 is available by default here in the 0.9.8 branch, and
32-bit x86 is available through a compile-time setting.
To try the 32-bit x86 assembler implementation, use Configure
option "enable-montasm" (which exists only for this backport).
As "enable-montasm" for 32-bit x86 disclaims code stability
anyway, in this constellation we activate additional code
backported from 0.9.9-dev for further performance improvements,
namely BN_from_montgomery_word. (To enable this otherwise,
e.g. x86_64, try "-DMONT_FROM_WORD___NON_DEFAULT_0_9_8_BUILD".)
[Andy Polyakov (backport partially by Bodo Moeller)]
*) Add TLS session ticket callback. This allows an application to set
TLS ticket cipher and HMAC keys rather than relying on hardcoded fixed
values. This is useful for key rollover for example where several key
sets may exist with different names.
[Steve Henson]
*) Reverse ENGINE-internal logic for caching default ENGINE handles.
This was broken until now in 0.9.8 releases, such that the only way
a registered ENGINE could be used (assuming it initialises
successfully on the host) was to explicitly set it as the default
for the relevant algorithms. This is in contradiction with 0.9.7
behaviour and the documentation. With this fix, when an ENGINE is
registered into a given algorithm's table of implementations, the
'uptodate' flag is reset so that auto-discovery will be used next
time a new context for that algorithm attempts to select an
implementation.
[Ian Lister (tweaked by Geoff Thorpe)]
*) Backport of CMS code to OpenSSL 0.9.8. This differs from the 0.9.9
implementation in the following ways:
Lack of EVP_PKEY_ASN1_METHOD means algorithm parameters have to be
hard coded.
Lack of BER streaming support means one pass streaming processing is
only supported if data is detached: setting the streaming flag is
ignored for embedded content.
CMS support is disabled by default and must be explicitly enabled
with the enable-cms configuration option.
[Steve Henson]
*) Update the GMP engine glue to do direct copies between BIGNUM and
mpz_t when openssl and GMP use the same limb size. Otherwise the
existing "conversion via a text string export" trick is still used.
[Paul Sheer <paulsheer@gmail.com>]
*) Zlib compression BIO. This is a filter BIO which compressed and
uncompresses any data passed through it.
[Steve Henson]
*) Add AES_wrap_key() and AES_unwrap_key() functions to implement
RFC3394 compatible AES key wrapping.
[Steve Henson]
*) Add utility functions to handle ASN1 structures. ASN1_STRING_set0():
sets string data without copying. X509_ALGOR_set0() and
X509_ALGOR_get0(): set and retrieve X509_ALGOR (AlgorithmIdentifier)
data. Attribute function X509at_get0_data_by_OBJ(): retrieves data
from an X509_ATTRIBUTE structure optionally checking it occurs only
once. ASN1_TYPE_set1(): set and ASN1_TYPE structure copying supplied
data.
[Steve Henson]
*) Fix BN flag handling in RSA_eay_mod_exp() and BN_MONT_CTX_set()
to get the expected BN_FLG_CONSTTIME behavior.
[Bodo Moeller (Google)]
*) Netware support:
- fixed wrong usage of ioctlsocket() when build for LIBC BSD sockets
- fixed do_tests.pl to run the test suite with CLIB builds too (CLIB_OPT)
- added some more tests to do_tests.pl
- fixed RunningProcess usage so that it works with newer LIBC NDKs too
- removed usage of BN_LLONG for CLIB builds to avoid runtime dependency
- added new Configure targets netware-clib-bsdsock, netware-clib-gcc,
netware-clib-bsdsock-gcc, netware-libc-bsdsock-gcc
- various changes to netware.pl to enable gcc-cross builds on Win32
platform
- changed crypto/bio/b_sock.c to work with macro functions (CLIB BSD)
- various changes to fix missing prototype warnings
- fixed x86nasm.pl to create correct asm files for NASM COFF output
- added AES, WHIRLPOOL and CPUID assembler code to build files
- added missing AES assembler make rules to mk1mf.pl
- fixed order of includes in apps/ocsp.c so that e_os.h settings apply
[Guenter Knauf <eflash@gmx.net>]
*) Implement certificate status request TLS extension defined in RFC3546.
A client can set the appropriate parameters and receive the encoded
OCSP response via a callback. A server can query the supplied parameters
and set the encoded OCSP response in the callback. Add simplified examples
to s_client and s_server.
[Steve Henson]
Changes between 0.9.8f and 0.9.8g [19 Oct 2007]
*) Fix various bugs:
+ Binary incompatibility of ssl_ctx_st structure
+ DTLS interoperation with non-compliant servers
+ Don't call get_session_cb() without proposed session
+ Fix ia64 assembler code
[Andy Polyakov, Steve Henson]
Changes between 0.9.8e and 0.9.8f [11 Oct 2007]
*) DTLS Handshake overhaul. There were longstanding issues with
OpenSSL DTLS implementation, which were making it impossible for
RFC 4347 compliant client to communicate with OpenSSL server.
Unfortunately just fixing these incompatibilities would "cut off"
pre-0.9.8f clients. To allow for hassle free upgrade post-0.9.8e
server keeps tolerating non RFC compliant syntax. The opposite is
not true, 0.9.8f client can not communicate with earlier server.
This update even addresses CVE-2007-4995.
[Andy Polyakov]
*) Changes to avoid need for function casts in OpenSSL: some compilers
(gcc 4.2 and later) reject their use.
[Kurt Roeckx <kurt@roeckx.be>, Peter Hartley <pdh@utter.chaos.org.uk>,
Steve Henson]
*) Add RFC4507 support to OpenSSL. This includes the corrections in
RFC4507bis. The encrypted ticket format is an encrypted encoded
SSL_SESSION structure, that way new session features are automatically
supported.
If a client application caches session in an SSL_SESSION structure
support is transparent because tickets are now stored in the encoded
SSL_SESSION.
4960
4961
4962
4963
4964
4965
4966
4967
4968
4969
4970
4971
4972
4973
4974
4975
4976
4977
4978
4979
4980
4981
4982
4983
4984
4985
4986
4987
4988
4989
4990
4991
4992
4993
4994
4995
4996
4997
4998
4999
5000
The SSL_CTX structure automatically generates keys for ticket
protection in servers so again support should be possible
with no application modification.
If a client or server wishes to disable RFC4507 support then the option
SSL_OP_NO_TICKET can be set.
Add a TLS extension debugging callback to allow the contents of any client
or server extensions to be examined.
This work was sponsored by Google.
[Steve Henson]
*) Add initial support for TLS extensions, specifically for the server_name
extension so far. The SSL_SESSION, SSL_CTX, and SSL data structures now
have new members for a host name. The SSL data structure has an
additional member SSL_CTX *initial_ctx so that new sessions can be
stored in that context to allow for session resumption, even after the
SSL has been switched to a new SSL_CTX in reaction to a client's
server_name extension.
New functions (subject to change):
SSL_get_servername()
SSL_get_servername_type()
SSL_set_SSL_CTX()
New CTRL codes and macros (subject to change):
SSL_CTRL_SET_TLSEXT_SERVERNAME_CB
- SSL_CTX_set_tlsext_servername_callback()
SSL_CTRL_SET_TLSEXT_SERVERNAME_ARG
- SSL_CTX_set_tlsext_servername_arg()
SSL_CTRL_SET_TLSEXT_HOSTNAME - SSL_set_tlsext_host_name()
openssl s_client has a new '-servername ...' option.
openssl s_server has new options '-servername_host ...', '-cert2 ...',
'-key2 ...', '-servername_fatal' (subject to change). This allows
testing the HostName extension for a specific single host name ('-cert'
and '-key' remain fallbacks for handshakes without HostName