- Aug 08, 2019
-
-
Matt Caswell authored
Ensure users understand that they need to have appropriate permissions to write to the install location. Reviewed-by:
Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com> Reviewed-by:
Paul Dale <paul.dale@oracle.com> (Merged from https://github.com/openssl/openssl/pull/9268) (cherry picked from commit 7c03bb9fff02b7f08d4654f51f8667584a92cf72)
-
Shane Lontis authored
Note a flag needed to be added since some ssl tests fail if they output any error (even if the error is ignored). Only ciphers that handle the GET_IV_LEN control set this flag. Fixes #8330 Reviewed-by:
Matt Caswell <matt@openssl.org> (Merged from https://github.com/openssl/openssl/pull/9499)
-
- Aug 06, 2019
-
-
Matt Caswell authored
They incorrectly said that i2d_ECDSA_SIG returns 0 on error. In fact it returns a negative value on error. We fix this by moving the i2d_ECDSA_SIG/d2i_ECDSA_SIG docs onto the same page as all the other d2i/i2d docs. Fixes #9517 Reviewed-by:
Nicola Tuveri <nic.tuv@gmail.com> (Merged from https://github.com/openssl/openssl/pull/9533) (cherry picked from commit bbda79976b5c5095c5e6557311c86c623ba335f1)
-
Matt Caswell authored
The macro TLS_MD_MASTER_SECRET_CONST is supposed to hold the ascii string "extended master secret". On EBCDIC machines it actually contained the value "extecded master secret" Reviewed-by:
-
- Aug 05, 2019
-
-
Matt Caswell authored
At some point in the past do_ssl3_write() used to return the number of bytes written, or a value <= 0 on error. It now just returns a success/ error code and writes the number of bytes written to |tmpwrit|. The SSL_MODE_RELEASE_BUFFERS code was still looking at the return code for the number of bytes written rather than |tmpwrit|. This has the effect that the buffers are not released when they are supposed to be. Fixes #9490 Reviewed-by:
-
- Aug 01, 2019
-
-
Dr. Matthias St. Pierre authored
Complements commit b383aa20 , which added X509_get0_authority_key_id(). const ASN1_OCTET_STRING *X509_get0_authority_key_id(X509 *x); const GENERAL_NAMES *X509_get0_authority_issuer(X509 *x); [NEW] const ASN1_INTEGER *X509_get0_authority_serial(X509 *x); [NEW] Reviewed-by:
-
raja-ashok authored
Reviewed-by:
-
- Jul 31, 2019
-
-
Antoine Cœur authored
CLA: trivial Reviewed-by:
Shane Lontis <shane.lontis@oracle.com> Reviewed-by:
-
joe2018Outlookcom authored
Fix: crypto\whrlpool\wp_block.c(90) : warning C4164: '_rotl64' : intrinsic function not declared. Fixes #9487 Reviewed-by:
-
David von Oheimb authored
Reviewed-by:
-
- Jul 30, 2019
-
-
Bernd Edlinger authored
This avoids a spurious gcc warning: ./config enable-asan --strict-warnings => In function 'afalg_create_sk', inlined from 'afalg_cipher_init' at engines/e_afalg.c:545:11: engines/e_afalg.c:376:5: error: '__builtin_strncpy' output may be truncated copying 63 bytes from a string of length 63 [-Werror=stringop-truncation] 376 | strncpy((char *) sa.salg_name, ciphername, ALG_MAX_SALG_NAME); | ^~~~~~~ [extended tests] Reviewed-by:
-
- Jul 28, 2019
-
-
Pauli authored
Implement the GNU C library's random(3) pseudorandom number generator. The algorithm is described: https://www.mscs.dal.ca/~selinger/random/ The rationale is to make the tests repeatable across differing platforms with different underlying implementations of the random(3) library call. More specifically: when executing tests with random ordering. [extended tests] Reviewed-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> (Merged from https://github.com/openssl/openssl/pull/9463) (cherry picked from commit e9a5932d04f6b7dd25b39a8ff9dc162d64a78c22)
-
- Jul 25, 2019
-
-
David Benjamin authored
tls_parse_stoc_key_share was generating a new EVP_PKEY public/private keypair and then overrides it with the server public key, so the generation was a waste anyway. Instead, it should create a parameters-only EVP_PKEY. (This is a consequence of OpenSSL using the same type for empty key, empty key with key type, empty key with key type + parameters, public key, and private key. As a result, it's easy to mistakenly mix such things up, as happened here.) Reviewed-by:
Kurt Roeckx <kurt@roeckx.be> (Merged from https://github.com/openssl/openssl/pull/9445) (cherry picked from commit 166c0b98fd6e8b1bb341397642527a9396468f6c)
-
Richard Levitte authored
Mingw config targets assumed that resulting programs and libraries are installed in a Unix-like environment and the default installation prefix was therefore set to '/usr/local'. However, mingw programs are installed in a Windows environment, and the installation directories should therefore have Windows defaults, i.e. the same kind of defaults as the VC config targets. A difficulty is, however, that a "cross compiled" build can't figure out the system defaults from environment the same way it's done when building "natively", so we have to fall back to hard coded defaults in that case. Tests can still be performed when cross compiled on a non-Windows platform, since all tests only depend on the source and build directory, and otherwise relies on normal local paths. CVE-2019-1552 Reviewed-by:
-
- Jul 23, 2019
-
-
Pauli authored
The rand pool support allocates maximal sized buffers -- this is typically 12288 bytes in size. These pools are allocated in secure memory which is a scarse resource. They are also allocated per DRBG of which there are up to two per thread. This change allocates 64 byte pools and grows them dynamically if required. 64 is chosen to be sufficiently large so that pools do not normally need to grow. Reviewed-by:
-
Bernd Edlinger authored
The additional data allocates 12K per DRBG instance in the secure memory, which is not necessary. Also nonces are not considered secret. [extended tests] Reviewed-by:
-
- Jul 24, 2019
-
-
Dr. Matthias St. Pierre authored
The HEADER_X509_H check is redundant, because <openssl/x509.h> is already included. Reviewed-by:
Richard Levitte <levitte@openssl.org> Reviewed-by:
-
Dr. Matthias St. Pierre authored
The check is redundant, because <openssl/x509v3.h> is included. Reviewed-by:
-
Dr. Matthias St. Pierre authored
This include guard inside an object file comes as a surprise and serves no purpose anymore. It seems like this object file was included by crypto/threads/mttest.c at some time, but the include directive was removed in commit bb8abd67 . Reviewed-by:
-
Dr. Matthias St. Pierre authored
Reviewed-by:
-
Bernd Edlinger authored
This avoids leaking bit 0 of the private key. Backport-of: #9363 Reviewed-by:
-
- Jul 23, 2019
-
-
Pauli authored
Reviewed-by:
-
- Jul 21, 2019
-
-
Richard Levitte authored
These weren't available in Cygwin at the time our DSO code was written, but things have changed since. Fixes #9385 Reviewed-by:
-
- Jul 19, 2019
-
-
Richard Levitte authored
If a config file gets loaded, the tests get disturbed. Reviewed-by:
-
- Jul 18, 2019
-
-
Bernd Edlinger authored
The barriers prevent the compiler from narrowing down the possible value range of the mask and ~mask in the select statements, which avoids the recognition of the select and turning it into a conditional load or branch. Reviewed-by:
Tomas Mraz <tmraz@fedoraproject.org> Reviewed-by:
-
Shane Lontis authored
Cosmetic changes to use the X509_STORE_lock/unlock functions. Renamed some ctx variables to store. Reviewed-by:
-
- Jul 17, 2019
-
-
Patrick Steuer authored
Signed-off-by:
Patrick Steuer <patrick.steuer@de.ibm.com> Reviewed-by:
-
Bernd Edlinger authored
Although in a false-conditional code section gcc-4.8.4 flagged this with a C90 warning :-( include/internal/refcount.h:108:7: error: C++ style comments are not allowed in ISO C90 [-Werror] // under Windows CE we still have old-style Interlocked* functions Reviewed-by: -
Matt Caswell authored
This function was always returning 0. It should return 1 on success. Fixes #9374 Reviewed-by:
-
- Jul 16, 2019
-
-
Todd Short authored
Also, use define rather than sizeof Reviewed-by:
-
Viktor Dukhovni authored
Reviewed-by: -
Pauli authored
Reviewed-by:
Tim Hudson <tjh@openssl.org> (Merged from https://github.com/openssl/openssl/pull/9390) (cherry picked from commit 3d9b33b5e48d82d098a1f8c37dbf616a0d84621c)
-
- Jul 15, 2019
-
-
Krists Krilovs authored
x509 store's objects cache can get corrupted when using dir lookup method in multithreaded application. Claim x509 store's lock when accessing objects cache. CLA: trivial Reviewed-by:
-
- Jul 11, 2019
-
-
agnosticdev authored
Reviewed-by:
-
- Jul 08, 2019
-
-
Dmitry Belyavskiy authored
Reviewed-by:
-
John Schember authored
CLA: trivial Reviewed-by:
-
Lei Maohui authored
Modified rev to rev64, because rev only takes integer registers. https://gcc.gnu.org/bugzilla/show_bug.cgi?id=90827 Otherwise, the following error will occur. Error: operand 1 must be an integer register -- `rev v31.16b,v31.16b' CLA: trivial Signed-off-by:
Lei Maohui <leimaohui@cn.fujitsu.com> Reviewed-by:
-
- Jul 07, 2019
-
-
Dr. Matthias St. Pierre authored
Reviewed-by:
-
Bernd Edlinger authored
Happens when trying to generate 4 or 5 bit safe primes. [extended tests] Reviewed-by:
-
- Jul 04, 2019
-
-
Tomas Mraz authored
Fixes #9259 Reviewed-by:
-
