Reviewed-by: Matt Caswell <matt@openssl.org>

Time to get rid of @MK1MF_Builds and introduce a more flexible
'build_scheme' configuration key.  Its value may be a string or an
array of strings, meaning we need to teach resolve_config how to
handle ARRAY referenses.

The build scheme is a word that selects a function to create the
appropriate result files for a certain configuration.  Currently valid
build schemes aer "mk1mf" and "unixmake", the plan is however to add
at least one other for a more universal build scheme.

Incidently, this also adds the functions 'add' and 'add_before', which
can be used in a configuration, so instead of having to repeatedly
write a sub like this:

	key1 => sub { join(" ", @_, "myvalues"); },
	key2 => sub { join(" ", "myvalues", @_); },

one could write this:

	key1 => add(" ", "myvalues"),
	key2 => add_before(" ", "myvalues"),

The good point with 'add' and 'add_before' is that they handle
inheritances where the values are a misture of scalars and ARRAYs.  If
there are any ARRAY to be found, the resulting value will be an ARRAY,
otherwise it will be a scalar with all the incoming valued joined
together with the separator given as first argument to add/add_before.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Move the documentation of the target configuration form to
Configurations/README.

Move initial assembler object templates to
Configurations/00-BASE-templates.conf.

Furthermore, remove all variables containing the names of the
non-assembler object files and make a BASE template of them instead.
The  values from this templates are used as defaults as is.  The
remaining manipulation of data when assembler modules are used is done
only when $no_asm is false.

While doing this, clean out some other related variables that aren't
used anywhere.

Also, we had to move the resolution of the chosen target a bit, or the
function 'asm' would never catch a true $no_asm...  this hasn't
mattered before we've moved it all to the BASE template, but now it
does.

At the same time, add the default for the 'unistd' key to the BASE
template.

Reviewed-by: Rich Salz <rsalz@openssl.org>

--prefix is now exclusively used for software and manual installation.
--openssldir is not exclusively used as a default location for certs,
keys and the default openssl.cnf.

This change is made to bring clarity, to have the two less
intertwined, and to be more compatible with the usual ways of software
installation.

Please change your habits and scripts to use --prefix rather than
--openssldir for installation location now.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

It's time to refactor the handling of %disabled so that all
information of value is in the same place.  We have so far had a few
cascading disable rules in form of code, far away from %disabled.
Instead, bring that information to the array @disable_cascade, which
is a list of pairs of the form 'test => descendents'.  The test part
can be a string, and it's simply checked if that string is a key in
%disabled, or it can be a CODEref to do a more complex test.  If the
test comes true, then all descendents are disabled.  This check is
performed until there are no more things that need to be disabled.

Also, $default_depflags is constructed from the information in
%disabled instead of being a separate string.  While a string of its
own is visually appealing, it's much too easy to forget to update it
when something is changed in %disabled.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

The way the "reconf"/"reconfigure" argument is handled is overly
complicated.  Just grep for it first, and if it is there in the
current arguments, get the old command line arguments from Makefile.

While we're at it, make the Makefile variable CONFIGURE_ARGS hold the
value as a perl list of strings.  This makes things much safer in case
one of the arguments would contain a space.  Since CONFIGURE_ARGS is
used for nothing else, there's no harm in this.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

It is sometimes useful (especially in automated tests) to supply
multiple trusted or untrusted certificates via separate files rather
than have to prepare a single file containing them all.

To that end, change verify(1) to accept these options zero or more
times.  Also automatically set -no-CAfile and -no-CApath when
-trusted is specified.

Improve verify(1) documentation, which could still use some work.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

Still need tests for trusted-first and tests that probe construction
of alternate chains.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Returning untrusted is enough for for full chains that end in
self-signed roots, because when explicit trust is specified it
suppresses the default blanket trust of self-signed objects.

But for partial chains, this is not enough, because absent a similar
trust-self-signed policy, non matching EKUs are indistinguishable
from lack of EKU constraints.

Therefore, failure to match any trusted purpose must trigger an
explicit reject.

Reviewed-by: Richard Levitte <levitte@openssl.org>

These can be re-generated via:

        cd test/certs; ./setup.sh

if need be.  The keys are all RSA 2048-bit keys, but it is possible
to change that via environment variables.

    cd test/certs
    rm -f *-key.pem *-key2.pem
    OPENSSL_KEYALG=rsa OPENSSL_KEYBITS=3072 ./setup.sh

    cd test/certs
    rm -f *-key.pem *-key2.pem
    OPENSSL_KEYALG=ecdsa OPENSSL_KEYBITS=secp384r1 ./setup.sh

    ...

Keys are re-used if already present, so the environment variables
are only used when generating any keys that are missing.  Hence
the "rm -f"

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

When DANE-EE(3) matches or either of DANE-EE/PKIX-EE fails, we don't
build a chain at all, but rather succeed or fail with just the leaf
certificate.  In either case also check for Suite-B violations.

As unlikely as it may seem that anyone would enable both DANE and
Suite-B, we should do what the application asks.

Took the opportunity to eliminate the "cb" variables in x509_vfy.c,
just call ctx->verify_cb(ok, ctx)

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Split the read_config function into read_config that ONLY reads the
configuration files but doesn't try to resolve any of the
inheritances, and resolve_config which resolves the inheritance chain
of a given target.  Move them to the bottom of Configure, with the
rest of the helpers.

Have a new small hash table, %target, which will hold the values for
the target the user requested.  This also means that all access to the
current target data can be reduced from '$table{$target}->{key}' to a
mere '$target{key}'.

While we're at it, the old string formatted configurations are getting
obsolete, so they may as well get deprecated entirely.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Get rid of the --test-sanity option.  Since we no longer have string
based configurations, we don't have the problem with miscounting
colons any more.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Start simple, removed some unused variables and change all '<<EOF' to
'<<"EOF"'.  The latter is because some code colorizers (notably, in
emacs) cannot recognise the here document end marker unless it's
quoted and therefore assume the rest of the file is part of the here
document.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Ben Laurie <ben@openssl.org>

Reviewed-by: Ben Laurie <ben@openssl.org>

Also remove depend/local_depend.
Reviewed-by: Richard Levitte <levitte@openssl.org>

Rename 'update' to 'generate'.  Rather than recurse, just explicitly
call the three generate targets directly.
Reviewed-by: Richard Levitte <levitte@openssl.org>

Calling SSL_shutdown while in init previously gave a "1" response, meaning
everything was successfully closed down (even though it wasn't). Better is
to send our close_notify, but fail when trying to receive one.

The problem with doing a shutdown while in the middle of a handshake is
that once our close_notify is sent we shouldn't really do anything else
(including process handshake/CCS messages) until we've received a
close_notify back from the peer. However the peer might send a CCS before
acting on our close_notify - so we won't be able to read it because we're
not acting on CCS messages!

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Richard Levitte <levitte@openssl.org>

The GOST engine is now out of date and is removed by this commit. An up
to date GOST engine is now being maintained in an external repository.

See:
https://wiki.openssl.org/index.php/Binaries



Reviewed-by: Richard Levitte <levitte@openssl.org>

For BSD systems, Configure adds a shared_ldflags including a reference
to the Makefile variable LIBRPATH, but since it must be passed down to
Makefile.shared, care must be taken so the value of LIBRPATH doesn't
get expanded too early, or it ends up giving an empty string.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

RT#4080

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Signed-off-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Some users want to disable SSL 3.0/TLS 1.0/TLS 1.1, and enable just
TLS 1.2.  In the future they might want to disable TLS 1.2 and
enable just TLS 1.3, ...

This commit makes it possible to disable any or all of the TLS or
DTLS protocols.  It also considerably simplifies the SSL/TLS tests,
by auto-generating the min/max version tests based on the set of
supported protocols (425 explicitly written out tests got replaced
by two loops that generate all 425 tests if all protocols are
enabled, fewer otherwise).

Reviewed-by: Richard Levitte <levitte@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Reviewed-by: Matt Caswell <matt@openssl.org>

Modify libssl to use EVP_PKEY TLS PRF.

Reviewed-by: Matt Caswell <matt@openssl.org>

Add EVP_PKEY algorithm for TLS1 PRF.

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix a typo in the definition of the GOST2012-NULL-GOST12 ciphersuite.

RT#4213

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

It seems risky in the context of cross-signed certificates when the
same certificate might have multiple potential issuers.  Also rarely
used, since chains in OpenSSL typically only employ self-signed
trust-anchors, whose self-signatures are not checked, while untrusted
certificates are generally ephemeral.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Cygwin was used for x86 before, so let's keep it around for those who
still use it (it make Configure reconf possible).
Cygwin-i[3456]86 for those that might generate and pass a target name
directly to Configure.

Reviewed-by: Rich Salz <rsalz@openssl.org>