MINFO may be an old file lying around, which might have
00-check_testexes.t produce incorrect results.  To make sure this
doesn't happen, check the variable VERSION in it against the same
variable in the top Makefile.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Before trying to read MINFO, we have no idea how many to test for, and
because skip expects to get an exact number somehow, it's better to
use 'plan skip_all'.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Following the commit from July 2 that removed netscape formated certs,
it is no longer necessary to have conversion tests for it.

Reviewed-by: Rich Salz <rsalz@openssl.org>

test_clienthello
test_packet
test_verify_extra
test_secmem

Reviewed-by: Rich Salz <rsalz@openssl.org>

VMS files are normally record oriented rather than stream oriented.
This means that every write() will create a new record, which is seen
as a line of its own, regardless of if there was a \n in there or not.
bntest uses BN_print, which prints out number with more than one
write(), thereby dividing up the numbers in several lines, which
greatly disturbs the post-bntest checks that expect to find a full
formula to calculate on one line.

So, for VMS, we need to push the linebuffer filter on the out BIO.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Unfortunately, a file spec with character range globs interfere with
paths on VMS, and are therefore disabled.  Rework this test to collect
a list of expected tests and a list of all recipes and compare the two
using grep.

Reviewed-by: Rich Salz <rsalz@openssl.org>

For OpenSSL::Test, it meant rearranging the code to better suite the
structure of the documentation.

Reviewed-by: Rich Salz <rsalz@openssl.org>

It became tedious as well as error prone to have all recipes use
Test::More as well as OpenSSL::Test.  The easier way is to make
OpenSSL::Test an extension of Test::More, thereby having all version
checks as well as future checks firmly there.  Additionally, that
allows us to extend existing Test::More functions if the need would
arise.

Reviewed-by: Rich Salz <rsalz@openssl.org>

When the environment variable STOPTEST is defined (with any value other
than the empty string), the test machinery in OpenSSL::Test goes into a
different mode that will stop all testing at the end of a failing recipe.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

00-check_testexes.t was a way for me to check that I didn't forget a
compiled test app.  The way it worked was to require MINFO to be present.
Considering the need for this test has diminished considerably at this
point, I might as well tone down the requirement, and have it skip the
test (and not fail it) if MINFO isn't present.

Reviewed-by: Rich Salz <rsalz@openssl.org>

For now, I'm moving them into Attic/.  They will be removed later.

Reviewed-by: Rich Salz <rsalz@openssl.org>

With the new testing framework, building a test target with mk1mf.pl
becomes a very simple thing.  And especially, no more need to do the
amount of hackery in unix.pl we did.

Also, some tests need a working apps/CA.pl as well as rehashed certs
in certs/demo.  So, move the code creating those files so it gets done
regardless, not just in non-mk1mf environments.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Very simple test recipes easily become tedious, so they might benefit
from being made as simple as possible.  Therefore, OpenSSL::Test::Simple
is born.  It currently provides but one function, simple_test(), which
takes a minimum of two parameters (test name and program to run), with
the optional third, being the algorithm to be checked for before
running the test itself.

All recipes with that simple thing to do have been rewritten to be as
minimal as possible.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Also remove recipes/00-check_testalltests.t, since it will lack the
information from the now gone alltests target.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The new test framework produces a lot of log files (one for each
test).  Git doesn't need to know.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Note that this required a change in constant_time_test.c, as it says
"ok", which interferes with what Test::Harness expects to see.  I had
constant_time_test.c say "success" instead.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This covers the certificate authority commands, the cms and smime
commands, OCSP, SSL and TSA.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Some of them make use of recipes/tconversion.pl.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Some of them make use of recipes/tconversion.pl.

Reviewed-by: Rich Salz <rsalz@openssl.org>

As tests are done until now, there are a few scripts that look almost,
but not quite the same.  tkey, tx509, tcrl, tpkcs7, treq, tsid and
probably a few more.

recipes/tconversions.pl is a helper script that generalises the
function of each of those, and can then be used in a general manner
from test recipes.

Reviewed-by: Rich Salz <rsalz@openssl.org>

This tests all available openssl cipher commands.

Reviewed-by: Rich Salz <rsalz@openssl.org>

These recipes all correspond to a compiled test program.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The math recipes are among the heavier, but also quite important.
For the BN test, we have previously relied on bc to verify the numbers.
Unfortunately, bc doesn't exist everywhere, making tests on some platforms
rather painful.  With the new recipe (recipes/10-test_bn.t), we rely
on perl's Math::BigInt and a homegrown simple calculator (recipes/bc.pl)
that can do enough to cover for bc.

Reviewed-by: Rich Salz <rsalz@openssl.org>

The idea with this perl based testing framework is to make use of
what's delivered with perl and exists on all sorts of platforms.

The choice came to using Test::More and Test::Harness, as that seems
to be the most widely spread foundation, even if perl is aged.

The main runner of the show is run_tests.pl.  As it currently stands,
it's designed to run from inside Makefile, but it's absolutely
possible to run it from the command line as well, like so:

	cd test
	OPENSSL_SRCDIR=.. perl run_tests.pl

The tester scripts themselves are stored in the subdirectory recipes/,
and initially, we have two such scripts, recipes/00-check_testalltests.t
and recipes/00-check_testexes.t.  recipes/00-check_testalltests.t will
pick out the dependencies of "alltests" in test/Makefile, and check if
it can find recipes with corresponding names.  recipes/00-check_testexes.t
does something similar, but bases it on existing compiled test binaries.
They make it easy to figure out what's to be added, and will be
removed when this effort is finished.

Individual recipes can be run as well, of course, as they are perl
scripts in themselves.  For example, you can run only
recipes/00-check_testexes.t like so:

	cd test
	OPENSSL_SRCDIR=.. perl recipes/00-check_testexes.t

To make coding easier, there's a routine library OpenSSL::Test, which
is reachable in a perl script like so:

	use lib 'testlib';
	use OpenSSL::Test;

Reviewed-by: Rich Salz <rsalz@openssl.org>

Process the ServerKeyExchange message using the PACKET API

Reviewed-by: Tim Hudson <tjh@openssl.org>

Process ServerHello messages using the PACKET API

Reviewed-by: Tim Hudson <tjh@openssl.org>

Ensure that EBCDIC support works and update a comment.

Reviewed-by: Tim Hudson <tjh@openssl.org>

GOST requires improved NumericString support.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

The build was breaking due to a Makefile recipe expecting an openssl
version to be on the PATH with support for the rehash command.

Reviewed-by: Ben Laurie <ben@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>

On Unix/Linux platforms, merge c_rehash script into openssl as a
C program.

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>

This takes away a build failure in some cases.

Reviewed-by: Tim Hudson <tjh@openssl.org>

To set both the incoming and outgoing data when 'encrypting' or
'decrypting' to FORMAT_BASE64 wasn't quite the right thing to do.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Reviewed-by: Stephen Henson <steve@openssl.org>

If the output to stdout or the input from stdin is meant to be binary,
it's deeply unsetting to get the occasional LF converted to CRLF or
the other way around.  If someone happens to forget to redirect stdin
or stdout, they will get gibberish anyway, line ending conversion will
not change that.

Therefore, let's not have dup_bio_* decide unilaterally what mode the
BIO derived from stdin and stdout, and rather let the app decide by
declaring the intended format.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Reviewed-by: Tim Hudson <tjh@openssl.org>