Newer
Older
Ralf S. Engelschall
committed
_______________
This is a high-level summary of the most important changes.
For a full list of changes, see the git commit log; for example,
https://github.com/openssl/openssl/commits/ and pick the appropriate
release branch.
Changes between 1.1.0g and 1.1.1 [xx XXX xxxx]
*) Added support for X448 and Ed448. Currently this is only supported in
libcrypto (not libssl). Heavily based on original work by Mike Hamburg.
[Matt Caswell]
*) Extend OSSL_STORE with capabilities to search and to narrow the set of
objects loaded. This adds the functions OSSL_STORE_expect() and
OSSL_STORE_find() as well as needed tools to construct searches and
get the search data out of them.
[Richard Levitte]
*) Support for TLSv1.3 added. Note that users upgrading from an earlier
version of OpenSSL should review their configuration settings to ensure
that they are still appropriate for TLSv1.3. In particular if no TLSv1.3
ciphersuites are enabled then OpenSSL will refuse to make a connection
unless (1) TLSv1.3 is explicitly disabled or (2) the ciphersuite
configuration is updated to include suitable ciphersuites. The DEFAULT
ciphersuite configuration does include TLSv1.3 ciphersuites. For further
information on this and other related issues please see:
https://www.openssl.org/blog/blog/2018/02/08/tlsv1.3/
NOTE: In this pre-release of OpenSSL a draft version of the
TLSv1.3 standard has been implemented. Implementations of different draft
versions of the standard do not inter-operate, and this version will not
inter-operate with an implementation of the final standard when it is
eventually published. Different pre-release versions may implement
different versions of the draft. The final version of OpenSSL 1.1.1 will
implement the final version of the standard.
TODO(TLS1.3): Remove the above note before final release
[Matt Caswell]
*) Grand redesign of the OpenSSL random generator
The default RAND method now utilizes an AES-CTR DRBG according to
NIST standard SP 800-90Ar1. The new random generator is essentially
a port of the default random generator from the OpenSSL FIPS 2.0
object module. It is a hybrid deterministic random bit generator
using an AES-CTR bit stream and which seeds and reseeds itself
automatically using trusted system entropy sources.
Some of its new features are:
o Support for multiple DRBG instances with seed chaining.
o Add a public DRBG instance for the default RAND method.
o Add a dedicated DRBG instance for generating long term private keys.
o Make the DRBG instances fork-safe.
o Keep all global DRBG instances on the secure heap if it is enabled.
o Add a DRBG instance to every SSL instance for lock free operation
and to increase unpredictability.
[Paul Dale, Benjamin Kaduk, Kurt Roeckx, Rich Salz, Matthias St. Pierre]
*) Changed Configure so it only says what it does and doesn't dump
so much data. Instead, ./configdata.pm should be used as a script
to display all sorts of configuration data.
[Richard Levitte]
*) Added processing of "make variables" to Configure.
[Richard Levitte]
*) Added SHA512/224 and SHA512/256 algorithm support.
[Paul Dale]
*) The last traces of Netware support, first removed in 1.1.0, have
now been removed.
[Rich Salz]
*) Get rid of Makefile.shared, and in the process, make the processing
of certain files (rc.obj, or the .def/.map/.opt files produced from
the ordinal files) more visible and hopefully easier to trace and
debug (or make silent).
[Richard Levitte]
*) Make it possible to have environment variable assignments as
arguments to config / Configure.
[Richard Levitte]
*) Add multi-prime RSA (RFC 8017) support.
[Paul Yang]
*) Add SM3 implemented according to GB/T 32905-2016
[ Jack Lloyd <jack.lloyd@ribose.com>,
Ronald Tse <ronald.tse@ribose.com>,
Erick Borsboom <erick.borsboom@ribose.com> ]
*) Add 'Maximum Fragment Length' TLS extension negotiation and support
as documented in RFC6066.
Based on a patch from Tomasz Moń
[Filipe Raimundo da Silva]
*) Add SM4 implemented according to GB/T 32907-2016.
[ Jack Lloyd <jack.lloyd@ribose.com>,
Ronald Tse <ronald.tse@ribose.com>,
Erick Borsboom <erick.borsboom@ribose.com> ]
*) Reimplement -newreq-nodes and ERR_error_string_n; the
original author does not agree with the license change.
[Rich Salz]
*) Add ARIA AEAD TLS support.
[Jon Spillett]
*) Some macro definitions to support VS6 have been removed. Visual
Studio 6 has not worked since 1.1.0
[Rich Salz]
*) Add ERR_clear_last_mark(), to allow callers to clear the last mark
without clearing the errors.
[Richard Levitte]
*) Add "atfork" functions. If building on a system that without
pthreads, see doc/man3/OPENSSL_fork_prepare.pod for application
requirements. The RAND facility now uses/requires this.
[Rich Salz]
*) The UI API becomes a permanent and integral part of libcrypto, i.e.
not possible to disable entirely. However, it's still possible to
disable the console reading UI method, UI_OpenSSL() (use UI_null()
as a fallback).
To disable, configure with 'no-ui-console'. 'no-ui' is still
possible to use as an alias. Check at compile time with the
macro OPENSSL_NO_UI_CONSOLE. The macro OPENSSL_NO_UI is still
possible to check and is an alias for OPENSSL_NO_UI_CONSOLE.
[Richard Levitte]
*) Add a STORE module, which implements a uniform and URI based reader of
stores that can contain keys, certificates, CRLs and numerous other
objects. The main API is loosely based on a few stdio functions,
and includes OSSL_STORE_open, OSSL_STORE_load, OSSL_STORE_eof,
OSSL_STORE_error and OSSL_STORE_close.
The implementation uses backends called "loaders" to implement arbitrary
URI schemes. There is one built in "loader" for the 'file' scheme.
[Richard Levitte]
*) Add devcrypto engine. This has been implemented against cryptodev-linux,
then adjusted to work on FreeBSD 8.4 as well.
Enable by configuring with 'enable-devcryptoeng'. This is done by default
on BSD implementations, as cryptodev.h is assumed to exist on all of them.
[Richard Levitte]
*) Module names can prefixed with OSSL_ or OPENSSL_. This affects
util/mkerr.pl, which is adapted to allow those prefixes, leading to
error code calls like this:
OSSL_FOOerr(OSSL_FOO_F_SOMETHING, OSSL_FOO_R_WHATEVER);
With this change, we claim the namespaces OSSL and OPENSSL in a manner
that can be encoded in C. For the foreseeable future, this will only
affect new modules.
[Richard Levitte and Tim Hudson]
*) Removed BSD cryptodev engine.
[Rich Salz]
*) Add a build target 'build_all_generated', to build all generated files
and only that. This can be used to prepare everything that requires
things like perl for a system that lacks perl and then move everything
to that system and do the rest of the build there.
[Richard Levitte]
*) In the UI interface, make it possible to duplicate the user data. This
can be used by engines that need to retain the data for a longer time
than just the call where this user data is passed.
[Richard Levitte]
*) Ignore the '-named_curve auto' value for compatibility of applications
with OpenSSL 1.0.2.
[Tomas Mraz <tmraz@fedoraproject.org>]
*) Fragmented SSL/TLS alerts are no longer accepted. An alert message is 2
bytes long. In theory it is permissible in SSLv3 - TLSv1.2 to fragment such
alerts across multiple records (some of which could be empty). In practice
it make no sense to send an empty alert record, or to fragment one. TLSv1.3
prohibts this altogether and other libraries (BoringSSL, NSS) do not
support this at all. Supporting it adds significant complexity to the
record layer, and its removal is unlikely to cause inter-operability
issues.
[Matt Caswell]
*) Add the ASN.1 types INT32, UINT32, INT64, UINT64 and variants prefixed
with Z. These are meant to replace LONG and ZLONG and to be size safe.
The use of LONG and ZLONG is discouraged and scheduled for deprecation
in OpenSSL 1.2.0.
[Richard Levitte]
*) Add the 'z' and 'j' modifiers to BIO_printf() et al formatting string,
'z' is to be used for [s]size_t, and 'j' - with [u]int64_t.
[Richard Levitte, Andy Polyakov]
*) Add EC_KEY_get0_engine(), which does for EC_KEY what RSA_get0_engine()
does for RSA, etc.
[Richard Levitte]
*) Have 'config' recognise 64-bit mingw and choose 'mingw64' as the target
platform rather than 'mingw'.
[Richard Levitte]
*) The functions X509_STORE_add_cert and X509_STORE_add_crl return
success if they are asked to add an object which already exists
in the store. This change cascades to other functions which load
certificates and CRLs.
[Paul Dale]
*) x86_64 assembly pack: annotate code with DWARF CFI directives to
facilitate stack unwinding even from assembly subroutines.
[Andy Polyakov]
*) Remove VAX C specific definitions of OPENSSL_EXPORT, OPENSSL_EXTERN.
Also remove OPENSSL_GLOBAL entirely, as it became a no-op.
[Richard Levitte]
*) Remove the VMS-specific reimplementation of gmtime from crypto/o_times.c.
VMS C's RTL has a fully up to date gmtime() and gmtime_r() since V7.1,
which is the minimum version we support.
[Richard Levitte]
*) Certificate time validation (X509_cmp_time) enforces stricter
compliance with RFC 5280. Fractional seconds and timezone offsets
are no longer allowed.
[Emilia Käsper]
*) Add support for ARIA
[Paul Dale]
*) s_client will now send the Server Name Indication (SNI) extension by
default unless the new "-noservername" option is used. The server name is
based on the host provided to the "-connect" option unless overridden by
using "-servername".
[Matt Caswell]
*) Add support for SipHash
[Todd Short]
*) OpenSSL now fails if it receives an unrecognised record type in TLS1.0
or TLS1.1. Previously this only happened in SSLv3 and TLS1.2. This is to
prevent issues where no progress is being made and the peer continually
sends unrecognised record types, using up resources processing them.
[Matt Caswell]
*) 'openssl passwd' can now produce SHA256 and SHA512 based output,
using the algorithm defined in
https://www.akkadia.org/drepper/SHA-crypt.txt
[Richard Levitte]
*) Heartbeat support has been removed; the ABI is changed for now.
[Richard Levitte, Rich Salz]
*) Support for SSL_OP_NO_ENCRYPT_THEN_MAC in SSL_CONF_cmd.
[Emilia Käsper]
*) The RSA "null" method, which was partially supported to avoid patent
issues, has been replaced to always returns NULL.
[Rich Salz]
Changes between 1.1.0g and 1.1.0h [xx XXX xxxx]
*) Removed the OS390-Unix config target. It relied on a script that doesn't
exist.
[Rich Salz]
*) rsaz_1024_mul_avx2 overflow bug on x86_64
There is an overflow bug in the AVX2 Montgomery multiplication procedure
used in exponentiation with 1024-bit moduli. No EC algorithms are affected.
Analysis suggests that attacks against RSA and DSA as a result of this
defect would be very difficult to perform and are not believed likely.
Attacks against DH1024 are considered just feasible, because most of the
work necessary to deduce information about a private key may be performed
offline. The amount of resources required for such an attack would be
significant. However, for an attack on TLS to be meaningful, the server
would have to share the DH1024 private key among multiple clients, which is
no longer an option since CVE-2016-0701.
This only affects processors that support the AVX2 but not ADX extensions
like Intel Haswell (4th generation).
This issue was reported to OpenSSL by David Benjamin (Google). The issue
was originally found via the OSS-Fuzz project.
(CVE-2017-3738)
[Andy Polyakov]
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
Changes between 1.1.0f and 1.1.0g [2 Nov 2017]
*) bn_sqrx8x_internal carry bug on x86_64
There is a carry propagating bug in the x86_64 Montgomery squaring
procedure. No EC algorithms are affected. Analysis suggests that attacks
against RSA and DSA as a result of this defect would be very difficult to
perform and are not believed likely. Attacks against DH are considered just
feasible (although very difficult) because most of the work necessary to
deduce information about a private key may be performed offline. The amount
of resources required for such an attack would be very significant and
likely only accessible to a limited number of attackers. An attacker would
additionally need online access to an unpatched system using the target
private key in a scenario with persistent DH parameters and a private
key that is shared between multiple clients.
This only affects processors that support the BMI1, BMI2 and ADX extensions
like Intel Broadwell (5th generation) and later or AMD Ryzen.
This issue was reported to OpenSSL by the OSS-Fuzz project.
(CVE-2017-3736)
[Andy Polyakov]
*) Malformed X.509 IPAddressFamily could cause OOB read
If an X.509 certificate has a malformed IPAddressFamily extension,
OpenSSL could do a one-byte buffer overread. The most likely result
would be an erroneous display of the certificate in text format.
This issue was reported to OpenSSL by the OSS-Fuzz project.
(CVE-2017-3735)
[Rich Salz]
Changes between 1.1.0e and 1.1.0f [25 May 2017]
*) Have 'config' recognise 64-bit mingw and choose 'mingw64' as the target
platform rather than 'mingw'.
[Richard Levitte]
*) Remove the VMS-specific reimplementation of gmtime from crypto/o_times.c.
VMS C's RTL has a fully up to date gmtime() and gmtime_r() since V7.1,
which is the minimum version we support.
[Richard Levitte]
Changes between 1.1.0d and 1.1.0e [16 Feb 2017]
*) Encrypt-Then-Mac renegotiation crash
During a renegotiation handshake if the Encrypt-Then-Mac extension is
negotiated where it was not in the original handshake (or vice-versa) then
this can cause OpenSSL to crash (dependant on ciphersuite). Both clients
and servers are affected.
This issue was reported to OpenSSL by Joe Orton (Red Hat).
(CVE-2017-3733)
[Matt Caswell]
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
Changes between 1.1.0c and 1.1.0d [26 Jan 2017]
*) Truncated packet could crash via OOB read
If one side of an SSL/TLS path is running on a 32-bit host and a specific
cipher is being used, then a truncated packet can cause that host to
perform an out-of-bounds read, usually resulting in a crash.
This issue was reported to OpenSSL by Robert Święcki of Google.
(CVE-2017-3731)
[Andy Polyakov]
*) Bad (EC)DHE parameters cause a client crash
If a malicious server supplies bad parameters for a DHE or ECDHE key
exchange then this can result in the client attempting to dereference a
NULL pointer leading to a client crash. This could be exploited in a Denial
of Service attack.
This issue was reported to OpenSSL by Guido Vranken.
(CVE-2017-3730)
[Matt Caswell]
*) BN_mod_exp may produce incorrect results on x86_64
There is a carry propagating bug in the x86_64 Montgomery squaring
procedure. No EC algorithms are affected. Analysis suggests that attacks
against RSA and DSA as a result of this defect would be very difficult to
perform and are not believed likely. Attacks against DH are considered just
feasible (although very difficult) because most of the work necessary to
deduce information about a private key may be performed offline. The amount
of resources required for such an attack would be very significant and
likely only accessible to a limited number of attackers. An attacker would
additionally need online access to an unpatched system using the target
private key in a scenario with persistent DH parameters and a private
key that is shared between multiple clients. For example this can occur by
default in OpenSSL DHE based SSL/TLS ciphersuites. Note: This issue is very
similar to CVE-2015-3193 but must be treated as a separate problem.
This issue was reported to OpenSSL by the OSS-Fuzz project.
(CVE-2017-3732)
[Andy Polyakov]
Changes between 1.1.0b and 1.1.0c [10 Nov 2016]
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
*) ChaCha20/Poly1305 heap-buffer-overflow
TLS connections using *-CHACHA20-POLY1305 ciphersuites are susceptible to
a DoS attack by corrupting larger payloads. This can result in an OpenSSL
crash. This issue is not considered to be exploitable beyond a DoS.
This issue was reported to OpenSSL by Robert Święcki (Google Security Team)
(CVE-2016-7054)
[Richard Levitte]
*) CMS Null dereference
Applications parsing invalid CMS structures can crash with a NULL pointer
dereference. This is caused by a bug in the handling of the ASN.1 CHOICE
type in OpenSSL 1.1.0 which can result in a NULL value being passed to the
structure callback if an attempt is made to free certain invalid encodings.
Only CHOICE structures using a callback which do not handle NULL value are
affected.
This issue was reported to OpenSSL by Tyler Nighswander of ForAllSecure.
(CVE-2016-7053)
[Stephen Henson]
*) Montgomery multiplication may produce incorrect results
There is a carry propagating bug in the Broadwell-specific Montgomery
multiplication procedure that handles input lengths divisible by, but
longer than 256 bits. Analysis suggests that attacks against RSA, DSA
and DH private keys are impossible. This is because the subroutine in
question is not used in operations with the private key itself and an input
of the attacker's direct choice. Otherwise the bug can manifest itself as
transient authentication and key negotiation failures or reproducible
erroneous outcome of public-key operations with specially crafted input.
Among EC algorithms only Brainpool P-512 curves are affected and one
presumably can attack ECDH key negotiation. Impact was not analyzed in
detail, because pre-requisites for attack are considered unlikely. Namely
multiple clients have to choose the curve in question and the server has to
share the private key among them, neither of which is default behaviour.
Even then only clients that chose the curve will be affected.
This issue was publicly reported as transient failures and was not
initially recognized as a security issue. Thanks to Richard Morgan for
providing reproducible case.
(CVE-2016-7055)
[Andy Polyakov]
*) Removed automatic addition of RPATH in shared libraries and executables,
as this was a remainder from OpenSSL 1.0.x and isn't needed any more.
[Richard Levitte]
Changes between 1.1.0a and 1.1.0b [26 Sep 2016]
*) Fix Use After Free for large message sizes
The patch applied to address CVE-2016-6307 resulted in an issue where if a
message larger than approx 16k is received then the underlying buffer to
store the incoming message is reallocated and moved. Unfortunately a
dangling pointer to the old location is left which results in an attempt to
write to the previously freed location. This is likely to result in a
crash, however it could potentially lead to execution of arbitrary code.
This issue only affects OpenSSL 1.1.0a.
This issue was reported to OpenSSL by Robert Święcki.
(CVE-2016-6309)
[Matt Caswell]
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
Changes between 1.1.0 and 1.1.0a [22 Sep 2016]
*) OCSP Status Request extension unbounded memory growth
A malicious client can send an excessively large OCSP Status Request
extension. If that client continually requests renegotiation, sending a
large OCSP Status Request extension each time, then there will be unbounded
memory growth on the server. This will eventually lead to a Denial Of
Service attack through memory exhaustion. Servers with a default
configuration are vulnerable even if they do not support OCSP. Builds using
the "no-ocsp" build time option are not affected.
This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
(CVE-2016-6304)
[Matt Caswell]
*) SSL_peek() hang on empty record
OpenSSL 1.1.0 SSL/TLS will hang during a call to SSL_peek() if the peer
sends an empty record. This could be exploited by a malicious peer in a
Denial Of Service attack.
This issue was reported to OpenSSL by Alex Gaynor.
(CVE-2016-6305)
[Matt Caswell]
*) Excessive allocation of memory in tls_get_message_header() and
dtls1_preprocess_fragment()
A (D)TLS message includes 3 bytes for its length in the header for the
message. This would allow for messages up to 16Mb in length. Messages of
this length are excessive and OpenSSL includes a check to ensure that a
peer is sending reasonably sized messages in order to avoid too much memory
being consumed to service a connection. A flaw in the logic of version
1.1.0 means that memory for the message is allocated too early, prior to
the excessive message length check. Due to way memory is allocated in
OpenSSL this could mean an attacker could force up to 21Mb to be allocated
to service a connection. This could lead to a Denial of Service through
memory exhaustion. However, the excessive message length check still takes
place, and this would cause the connection to immediately fail. Assuming
that the application calls SSL_free() on the failed connection in a timely
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
manner then the 21Mb of allocated memory will then be immediately freed
again. Therefore the excessive memory allocation will be transitory in
nature. This then means that there is only a security impact if:
1) The application does not call SSL_free() in a timely manner in the event
that the connection fails
or
2) The application is working in a constrained environment where there is
very little free memory
or
3) The attacker initiates multiple connection attempts such that there are
multiple connections in a state where memory has been allocated for the
connection; SSL_free() has not yet been called; and there is insufficient
memory to service the multiple requests.
Except in the instance of (1) above any Denial Of Service is likely to be
transitory because as soon as the connection fails the memory is
subsequently freed again in the SSL_free() call. However there is an
increased risk during this period of application crashes due to the lack of
memory - which would then mean a more serious Denial of Service.
This issue was reported to OpenSSL by Shi Lei (Gear Team, Qihoo 360 Inc.)
(CVE-2016-6307 and CVE-2016-6308)
[Matt Caswell]
*) solaris-x86-cc, i.e. 32-bit configuration with vendor compiler,
had to be removed. Primary reason is that vendor assembler can't
assemble our modules with -KPIC flag. As result it, assembly
support, was not even available as option. But its lack means
lack of side-channel resistant code, which is incompatible with
security by todays standards. Fortunately gcc is readily available
prepackaged option, which we firmly point at...
[Andy Polyakov]
Changes between 1.0.2h and 1.1.0 [25 Aug 2016]
*) Windows command-line tool supports UTF-8 opt-in option for arguments
and console input. Setting OPENSSL_WIN32_UTF8 environment variable
(to any value) allows Windows user to access PKCS#12 file generated
with Windows CryptoAPI and protected with non-ASCII password, as well
as files generated under UTF-8 locale on Linux also protected with
non-ASCII password.
[Andy Polyakov]
*) To mitigate the SWEET32 attack (CVE-2016-2183), 3DES cipher suites
have been disabled by default and removed from DEFAULT, just like RC4.
See the RC4 item below to re-enable both.
*) The method for finding the storage location for the Windows RAND seed file
has changed. First we check %RANDFILE%. If that is not set then we check
the directories %HOME%, %USERPROFILE% and %SYSTEMROOT% in that order. If
all else fails we fall back to C:\.
[Matt Caswell]
*) The EVP_EncryptUpdate() function has had its return type changed from void
to int. A return of 0 indicates and error while a return of 1 indicates
success.
[Matt Caswell]
*) The flags RSA_FLAG_NO_CONSTTIME, DSA_FLAG_NO_EXP_CONSTTIME and
DH_FLAG_NO_EXP_CONSTTIME which previously provided the ability to switch
off the constant time implementation for RSA, DSA and DH have been made
no-ops and deprecated.
[Matt Caswell]
*) Windows RAND implementation was simplified to only get entropy by
calling CryptGenRandom(). Various other RAND-related tickets
were also closed.
[Joseph Wylie Yandle, Rich Salz]
*) The stack and lhash API's were renamed to start with OPENSSL_SK_
and OPENSSL_LH_, respectively. The old names are available
with API compatibility. They new names are now completely documented.
[Rich Salz]
*) Unify TYPE_up_ref(obj) methods signature.
SSL_CTX_up_ref(), SSL_up_ref(), X509_up_ref(), EVP_PKEY_up_ref(),
X509_CRL_up_ref(), X509_OBJECT_up_ref_count() methods are now returning an
int (instead of void) like all others TYPE_up_ref() methods.
So now these methods also check the return value of CRYPTO_atomic_add(),
and the validity of object reference counter.
[fdasilvayy@gmail.com]
Richard Levitte
committed
*) With Windows Visual Studio builds, the .pdb files are installed
alongside the installed libraries and executables. For a static
library installation, ossl_static.pdb is the associate compiler
generated .pdb file to be used when linking programs.
[Richard Levitte]
*) Remove openssl.spec. Packaging files belong with the packagers.
[Richard Levitte]
*) Automatic Darwin/OSX configuration has had a refresh, it will now
recognise x86_64 architectures automatically. You can still decide
to build for a different bitness with the environment variable
KERNEL_BITS (can be 32 or 64), for example:
KERNEL_BITS=32 ./config
[Richard Levitte]
*) Change default algorithms in pkcs8 utility to use PKCS#5 v2.0,
256 bit AES and HMAC with SHA256.
[Steve Henson]
*) Remove support for MIPS o32 ABI on IRIX (and IRIX only).
[Andy Polyakov]
*) Triple-DES ciphers have been moved from HIGH to MEDIUM.
*) To enable users to have their own config files and build file templates,
Configure looks in the directory indicated by the environment variable
OPENSSL_LOCAL_CONFIG_DIR as well as the in-source Configurations/
directory. On VMS, OPENSSL_LOCAL_CONFIG_DIR is expected to be a logical
name and is used as is.
[Richard Levitte]
*) The following datatypes were made opaque: X509_OBJECT, X509_STORE_CTX,
X509_STORE, X509_LOOKUP, and X509_LOOKUP_METHOD. The unused type
X509_CERT_FILE_CTX was removed.
[Rich Salz]
*) "shared" builds are now the default. To create only static libraries use
the "no-shared" Configure option.
[Matt Caswell]
*) Remove the no-aes, no-hmac, no-rsa, no-sha and no-md5 Configure options.
All of these option have not worked for some while and are fundamental
algorithms.
[Matt Caswell]
*) Make various cleanup routines no-ops and mark them as deprecated. Most
global cleanup functions are no longer required because they are handled
via auto-deinit (see OPENSSL_init_crypto and OPENSSL_init_ssl man pages).
Explicitly de-initing can cause problems (e.g. where a library that uses
OpenSSL de-inits, but an application is still using it). The affected
functions are CONF_modules_free(), ENGINE_cleanup(), OBJ_cleanup(),
EVP_cleanup(), BIO_sock_cleanup(), CRYPTO_cleanup_all_ex_data(),
RAND_cleanup(), SSL_COMP_free_compression_methods(), ERR_free_strings() and
COMP_zlib_cleanup().
[Matt Caswell]
*) --strict-warnings no longer enables runtime debugging options
such as REF_DEBUG. Instead, debug options are automatically
enabled with '--debug' builds.
[Andy Polyakov, Emilia Käsper]
*) Made DH and DH_METHOD opaque. The structures for managing DH objects
have been moved out of the public header files. New functions for managing
these have been added.
[Matt Caswell]
*) Made RSA and RSA_METHOD opaque. The structures for managing RSA
objects have been moved out of the public header files. New
functions for managing these have been added.
[Richard Levitte]
*) Made DSA and DSA_METHOD opaque. The structures for managing DSA objects
have been moved out of the public header files. New functions for managing
these have been added.
[Matt Caswell]
*) Made BIO and BIO_METHOD opaque. The structures for managing BIOs have been
moved out of the public header files. New functions for managing these
have been added.
[Matt Caswell]
*) Removed no-rijndael as a config option. Rijndael is an old name for AES.
*) Removed the mk1mf build scripts.
[Richard Levitte]
*) Headers are now wrapped, if necessary, with OPENSSL_NO_xxx, so
it is always safe to #include a header now.
[Rich Salz]
*) Removed the aged BC-32 config and all its supporting scripts
[Richard Levitte]
*) Added support for "pipelining". Ciphers that have the
EVP_CIPH_FLAG_PIPELINE flag set have a capability to process multiple
encryptions/decryptions simultaneously. There are currently no built-in
ciphers with this property but the expectation is that engines will be able
to offer it to significantly improve throughput. Support has been extended
into libssl so that multiple records for a single connection can be
processed in one go (for >=TLS 1.1).
[Matt Caswell]
*) Added the AFALG engine. This is an async capable engine which is able to
offload work to the Linux kernel. In this initial version it only supports
AES128-CBC. The kernel must be version 4.1.0 or greater.
[Catriona Lucey]
*) OpenSSL now uses a new threading API. It is no longer necessary to
set locking callbacks to use OpenSSL in a multi-threaded environment. There
are two supported threading models: pthreads and windows threads. It is
also possible to configure OpenSSL at compile time for "no-threads". The
old threading API should no longer be used. The functions have been
replaced with "no-op" compatibility macros.
[Alessandro Ghedini, Matt Caswell]
*) Modify behavior of ALPN to invoke callback after SNI/servername
callback, such that updates to the SSL_CTX affect ALPN.
[Todd Short]
*) Add SSL_CIPHER queries for authentication and key-exchange.
[Todd Short]
*) Changes to the DEFAULT cipherlist:
- Prefer (EC)DHE handshakes over plain RSA.
- Prefer AEAD ciphers over legacy ciphers.
- Prefer ECDSA over RSA when both certificates are available.
- Prefer TLSv1.2 ciphers/PRF.
- Remove DSS, SEED, IDEA, CAMELLIA, and AES-CCM from the
default cipherlist.
[Emilia Käsper]
*) Change the ECC default curve list to be this, in order: x25519,
secp256r1, secp521r1, secp384r1.
[Rich Salz]
*) RC4 based libssl ciphersuites are now classed as "weak" ciphers and are
disabled by default. They can be re-enabled using the
enable-weak-ssl-ciphers option to Configure.
[Matt Caswell]
*) If the server has ALPN configured, but supports no protocols that the
client advertises, send a fatal "no_application_protocol" alert.
This behaviour is SHALL in RFC 7301, though it isn't universally
implemented by other servers.
[Emilia Käsper]
Add ASN.1 and EVP_PKEY methods for X25519. This includes support
for public and private key encoding using the format documented in
draft-ietf-curdle-pkix-02. The corresponding EVP_PKEY method supports
key generation and key derivation.
TLS support complies with draft-ietf-tls-rfc4492bis-08 and uses
X25519(29).
*) Deprecate SRP_VBASE_get_by_user.
SRP_VBASE_get_by_user had inconsistent memory management behaviour.
In order to fix an unavoidable memory leak (CVE-2016-0798),
SRP_VBASE_get_by_user was changed to ignore the "fake user" SRP
seed, even if the seed is configured.
Users should use SRP_VBASE_get1_by_user instead. Note that in
SRP_VBASE_get1_by_user, caller must free the returned value. Note
also that even though configuring the SRP seed attempts to hide
invalid usernames by continuing the handshake with fake
credentials, this behaviour is not constant time and no strong
guarantees are made that the handshake is indistinguishable from
that of a valid user.
[Emilia Käsper]
*) Configuration change; it's now possible to build dynamic engines
without having to build shared libraries and vice versa. This
only applies to the engines in engines/, those in crypto/engine/
will always be built into libcrypto (i.e. "static").
Building dynamic engines is enabled by default; to disable, use
the configuration option "disable-dynamic-engine".
The only requirements for building dynamic engines are the
presence of the DSO module and building with position independent
code, so they will also automatically be disabled if configuring
The macros OPENSSL_NO_STATIC_ENGINE and OPENSSL_NO_DYNAMIC_ENGINE
are also taken away from openssl/opensslconf.h, as they are
irrelevant.
[Richard Levitte]
*) Configuration change; if there is a known flag to compile
position independent code, it will always be applied on the
libcrypto and libssl object files, and never on the application
object files. This means other libraries that use routines from
libcrypto / libssl can be made into shared libraries regardless
of how OpenSSL was configured.
If this isn't desirable, the configuration options "disable-pic"
or "no-pic" can be used to disable the use of PIC. This will
also disable building shared libraries and dynamic engines.
*) Removed JPAKE code. It was experimental and has no wide use.
[Rich Salz]
*) The INSTALL_PREFIX Makefile variable has been renamed to
DESTDIR. That makes for less confusion on what this variable
is for. Also, the configuration option --install_prefix is
removed.
[Richard Levitte]
*) Heartbeat for TLS has been removed and is disabled by default
for DTLS; configure with enable-heartbeats. Code that uses the
old #define's might need to be updated.
[Emilia Käsper, Rich Salz]
*) Rename REF_CHECK to REF_DEBUG.
[Rich Salz]
*) New "unified" build system
The "unified" build system is aimed to be a common system for all
platforms we support. With it comes new support for VMS.
This system builds supports building in a different directory tree
than the source tree. It produces one Makefile (for unix family
or lookalikes), or one descrip.mms (for VMS).
The source of information to make the Makefile / descrip.mms is
small files called 'build.info', holding the necessary
information for each directory with source to compile, and a
template in Configurations, like unix-Makefile.tmpl or
descrip.mms.tmpl.
With this change, the library names were also renamed on Windows
and on VMS. They now have names that are closer to the standard
on Unix, and include the major version number, and in certain
cases, the architecture they are built for. See "Notes on shared
libraries" in INSTALL.
We rely heavily on the perl module Text::Template.
[Richard Levitte]
*) Added support for auto-initialisation and de-initialisation of the library.
OpenSSL no longer requires explicit init or deinit routines to be called,
except in certain circumstances. See the OPENSSL_init_crypto() and
OPENSSL_init_ssl() man pages for further information.
*) The arguments to the DTLSv1_listen function have changed. Specifically the
"peer" argument is now expected to be a BIO_ADDR object.
*) Rewrite of BIO networking library. The BIO library lacked consistent
support of IPv6, and adding it required some more extensive
modifications. This introduces the BIO_ADDR and BIO_ADDRINFO types,
which hold all types of addresses and chains of address information.
It also introduces a new API, with functions like BIO_socket,
BIO_connect, BIO_listen, BIO_lookup and a rewrite of BIO_accept.
The source/sink BIOs BIO_s_connect, BIO_s_accept and BIO_s_datagram
have been adapted accordingly.
[Richard Levitte]
*) RSA_padding_check_PKCS1_type_1 now accepts inputs with and without
the leading 0-byte.
[Emilia Käsper]
*) CRIME protection: disable compression by default, even if OpenSSL is
compiled with zlib enabled. Applications can still enable compression
by calling SSL_CTX_clear_options(ctx, SSL_OP_NO_COMPRESSION), or by
using the SSL_CONF library to configure compression.
[Emilia Käsper]
*) The signature of the session callback configured with
SSL_CTX_sess_set_get_cb was changed. The read-only input buffer
was explicitly marked as 'const unsigned char*' instead of
'unsigned char*'.
[Emilia Käsper]
*) Always DPURIFY. Remove the use of uninitialized memory in the
RNG, and other conditional uses of DPURIFY. This makes -DPURIFY a no-op.
[Emilia Käsper]
*) Removed many obsolete configuration items, including
DES_PTR, DES_RISC1, DES_RISC2, DES_INT
MD2_CHAR, MD2_INT, MD2_LONG
BF_PTR, BF_PTR2
IDEA_SHORT, IDEA_LONG
RC2_SHORT, RC2_LONG, RC4_LONG, RC4_CHUNK, RC4_INDEX
[Rich Salz, with advice from Andy Polyakov]
*) Many BN internals have been moved to an internal header file.
[Rich Salz with help from Andy Polyakov]
Richard Levitte
committed
*) Configuration and writing out the results from it has changed.
Files such as Makefile include/openssl/opensslconf.h and are now
produced through general templates, such as Makefile.in and
crypto/opensslconf.h.in and some help from the perl module
Text::Template.
Also, the center of configuration information is no longer
Makefile. Instead, Configure produces a perl module in
configdata.pm which holds most of the config data (in the hash
table %config), the target data that comes from the target
configuration in one of the Configurations/*.conf files (in
%target).
[Richard Levitte]
*) To clarify their intended purposes, the Configure options
--prefix and --openssldir change their semantics, and become more
straightforward and less interdependent.
--prefix shall be used exclusively to give the location INSTALLTOP
where programs, scripts, libraries, include files and manuals are
going to be installed. The default is now /usr/local.
--openssldir shall be used exclusively to give the default
location OPENSSLDIR where certificates, private keys, CRLs are
managed. This is also where the default openssl.cnf gets
installed.
If the directory given with this option is a relative path, the
values of both the --prefix value and the --openssldir value will
be combined to become OPENSSLDIR.
The default for --openssldir is INSTALLTOP/ssl.
Anyone who uses --openssldir to specify where OpenSSL is to be
installed MUST change to use --prefix instead.
[Richard Levitte]
*) The GOST engine was out of date and therefore it has been removed. An up
to date GOST engine is now being maintained in an external repository.
See: https://wiki.openssl.org/index.php/Binaries. Libssl still retains
support for GOST ciphersuites (these are only activated if a GOST engine
is present).
[Matt Caswell]
*) EGD is no longer supported by default; use enable-egd when
configuring.
*) The distribution now has Makefile.in files, which are used to
create Makefile's when Configure is run. *Configure must be run
before trying to build now.*
[Rich Salz]
*) The return value for SSL_CIPHER_description() for error conditions
has changed.
[Rich Salz]
*) Support for RFC6698/RFC7671 DANE TLSA peer authentication.
Obtaining and performing DNSSEC validation of TLSA records is
the application's responsibility. The application provides
the TLSA records of its choice to OpenSSL, and these are then
used to authenticate the peer.
The TLSA records need not even come from DNS. They can, for
example, be used to implement local end-entity certificate or
trust-anchor "pinning", where the "pin" data takes the form
of TLSA records, which can augment or replace verification
based on the usual WebPKI public certification authorities.
[Viktor Dukhovni]
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
*) Revert default OPENSSL_NO_DEPRECATED setting. Instead OpenSSL
continues to support deprecated interfaces in default builds.
However, applications are strongly advised to compile their
source files with -DOPENSSL_API_COMPAT=0x10100000L, which hides
the declarations of all interfaces deprecated in 0.9.8, 1.0.0
or the 1.1.0 releases.
In environments in which all applications have been ported to
not use any deprecated interfaces OpenSSL's Configure script
should be used with the --api=1.1.0 option to entirely remove
support for the deprecated features from the library and
unconditionally disable them in the installed headers.
Essentially the same effect can be achieved with the "no-deprecated"
argument to Configure, except that this will always restrict
the build to just the latest API, rather than a fixed API
version.
As applications are ported to future revisions of the API,
they should update their compile-time OPENSSL_API_COMPAT define
accordingly, but in most cases should be able to continue to
compile with later releases.
The OPENSSL_API_COMPAT versions for 1.0.0, and 0.9.8 are
0x10000000L and 0x00908000L, respectively. However those
versions did not support the OPENSSL_API_COMPAT feature, and
so applications are not typically tested for explicit support
of just the undeprecated features of either release.
[Viktor Dukhovni]
*) Add support for setting the minimum and maximum supported protocol.
It can bet set via the SSL_set_min_proto_version() and
SSL_set_max_proto_version(), or via the SSL_CONF's MinProtocol and
MaxProtocol. It's recommended to use the new APIs to disable
protocols instead of disabling individual protocols using
SSL_set_options() or SSL_CONF's Protocol. This change also
removes support for disabling TLS 1.2 in the OpenSSL TLS
client at compile time by defining OPENSSL_NO_TLS1_2_CLIENT.