Newer
Older
* For carriageways with more than 13 driving lanes, the drivingLaneStatus component shall not be present.
* @category: Infrastructure information, Road topology information
*/
ClosedLanes ::= SEQUENCE {
innerhardShoulderStatus HardShoulderStatus OPTIONAL,
outerhardShoulderStatus HardShoulderStatus OPTIONAL,
drivingLaneStatus DrivingLaneStatus OPTIONAL,
...
}
/**
* This DF provides information about the breakup of a cluster.
*
*
* @field clusterBreakupReason: indicates the reason for breakup.
*
* @field breakupTime: indicates the time of breakup.
*
* @category: Cluster Information
* @revision: Created in V2.1.1
*/
ClusterBreakupInfo ::= SEQUENCE {
clusterBreakupReason ClusterBreakupReason,
breakupTime DeltaTimeQuarterSecond,
...
}
/**
* This DF provides information about the joining of a cluster.
*
*
* @field clusterId: indicates the identifier of the cluster.
*
* @field joinTime: indicates the time of joining.
*
* @category: Cluster Information
* @revision: Created in V2.1.1
*/
ClusterJoinInfo ::= SEQUENCE {
joinTime DeltaTimeQuarterSecond,
...
}
/**
* The DF provides information about the leaving of a cluster.
*
*
* @field clusterId: indicates the cluster.
*
* @field clusterLeaveReason: indicates the reason for leaving.
*
* @category: Cluster Information
* @revision: Created in V2.1.1
*/
ClusterLeaveInfo ::= SEQUENCE {
clusterLeaveReason ClusterLeaveReason,
...
}
/**
* This DF represents a column of a lower triangular positive semi-definite matrix and consists of a list of correlation cell values ordered by rows.
* Given a matrix "A" of size n x n, the number of columns to be included in the lower triangular matrix is k=n-1.
* Each column "i" of the lower triangular matrix then contains k-(i-1) values (ordered by rows from 1 to n-1), where "i" refers to the column number count
* starting at 1 from the left.
*
* @category: Sensing Information
* @revision: Created in V2.1.1
*/
CorrelationColumn ::= SEQUENCE SIZE (1..13,...) OF CorrelationCellValue
* This DF represents the curvature of the vehicle trajectory and the associated confidence value.
* The curvature detected by a vehicle represents the curvature of actual vehicle trajectory.
*
*
* @field curvatureValue: Detected curvature of the vehicle trajectory.
*
* @field curvatureConfidence: along with a confidence value of the curvature value with a predefined confidence level.
*/
Curvature ::= SEQUENCE {
curvatureValue CurvatureValue,
curvatureConfidence CurvatureConfidence
}
/**
* This DF provides a description of dangerous goods being carried by a heavy vehicle.
*
*
* @field dangerousGoodsType: Type of dangerous goods.
*
* @field unNumber: a 4-digit number that identifies the substance of the dangerous goods as specified in
* United Nations Recommendations on the Transport of Dangerous Goods - Model Regulations [4],
*
* @field elevatedTemperature: whether the carried dangerous goods are transported at high temperature.
* If yes, the value shall be set to TRUE,
*
* @field tunnelsRestricted: whether the heavy vehicle carrying dangerous goods is restricted to enter tunnels.
* If yes, the value shall be set to TRUE,
*
* @field limitedQuantity: whether the carried dangerous goods are packed with limited quantity.
* If yes, the value shall be set to TRUE,
*
* @field emergencyActionCode: physical signage placard at the vehicle that carries information on how an emergency
* service should deal with an incident. This component is optional; it shall be present if the information is available.
*
* @field phoneNumber: contact phone number of assistance service in case of incident or accident.
* This component is optional, it shall be present if the information is available.
*
* @field companyName: name of company that manages the transportation of the dangerous goods.
* This component is optional; it shall be present if the information is available.
*
* @category Vehicle information
* @revision: V1.3.1
*/
DangerousGoodsExtended ::= SEQUENCE {
dangerousGoodsType DangerousGoodsBasic,
unNumber INTEGER (0..9999),
elevatedTemperature BOOLEAN,
tunnelsRestricted BOOLEAN,
limitedQuantity BOOLEAN,
emergencyActionCode IA5String (SIZE (1..24)) OPTIONAL,
phoneNumber PhoneNumber OPTIONAL,
companyName UTF8String (SIZE (1..24)) OPTIONAL,
* This DF defines a geographical point position as a 3 dimensional offset position to a geographical reference point.
*
* @field deltaLatitude: A delta latitude offset with regards to the latitude value of the reference position.
*
* @field deltaLongitude: A delta longitude offset with regards to the longitude value of the reference position.
*
* @field deltaAltitude: A delta altitude offset with regards to the altitude value of the reference position.
*
* @category: GeoReference information
* @revision: V1.3.1
*/
DeltaReferencePosition ::= SEQUENCE {
deltaLatitude DeltaLatitude,
deltaLongitude DeltaLongitude,
deltaAltitude DeltaAltitude
}
/**
* This DF represents a portion of digital map. It shall contain a list of waypoints @ref ReferencePosition.
*
* @category: GeoReference information
* @revision: V1.3.1
*/
DigitalMap ::= SEQUENCE (SIZE(1..256)) OF ReferencePosition
/**
*
* This DF represents the shape of an elliptical area or right elliptical cylinder that is centred
* on the shape's reference point defined outside of the context of this DF and oriented w.r.t. a
* cartesian coordinate system defined outside of the context of this DF.
* @field shapeReferencePoint: optional reference point which represents the centre of the ellipse,
* relative to an externally specified reference position. If this component is absent, the
* externally specified reference position represents the shape's reference point.
* @field semiMajorAxisLength: half length of the major axis of the ellipse located in the X-Y Plane.
* @field semiMinorAxisLength: half length of the minor axis of the ellipse located in the X-Y Plane.
* @field orientation: the optional orientation of the major axis of the ellipse, measured with
* positive values turning around the z-axis using the right-hand rule, starting from the X-axis.
* @field height: the optional height, present if the shape is a right elliptical cylinder extending
* in the positive Z-axis.
* @revision: Created in V2.1.1, the type of the field orientation changed and the description revised in V2.2.1
semiMajorAxisLength StandardLength12b,
semiMinorAxisLength StandardLength12b,
5202
5203
5204
5205
5206
5207
5208
5209
5210
5211
5212
5213
5214
5215
5216
5217
5218
5219
5220
5221
5222
5223
5224
5225
5226
5227
/**
* This DF represents the Euler angles which describe the orientation of an object bounding box in a Cartesian coordinate system with an associated confidence level for each angle.
*
* It shall include the following components:
*
* @field zAngle: z-angle of object bounding box at the time of measurement, with the associated confidence.
* The angle is measured with positive values considering the object orientation turning around the z-axis using the right-hand rule, starting from the x-axis.
* This extrinsic rotation shall be applied around the centre point of the object bounding box before all other rotations.
*
* @field yAngle: optional y-angle of object bounding box at the time of measurement, with the associated confidence.
* The angle is measured with positive values considering the object orientation turning around the y-axis using the right-hand rule, starting from the z-axis.
* This extrinsic rotation shall be applied around the centre point of the object bounding box after the rotation by zAngle and before the rotation by xAngle.
*
* @field xAngle: optional x-angle of object bounding box at the time of measurement, with the associated confidence.
* The angle is measured with positive values considering the object orientation turning around the x-axis using the right-hand rule, starting from the z-axis.
* This extrinsic rotation shall be applied around the centre point of the object bounding box after all other rotations.
*
* @category: Basic information
* @revision: Created in V2.1.1
*/
EulerAnglesWithConfidence ::= SEQUENCE {
zAngle CartesianAngle,
yAngle CartesianAngle OPTIONAL,
xAngle CartesianAngle OPTIONAL
}
* This DF represents a vehicle category according to the UNECE/TRANS/WP.29/78/Rev.4 [16].
5231
5232
5233
5234
5235
5236
5237
5238
5239
5240
5241
5242
5243
5244
5245
5246
5247
5248
5249
5250
5251
5252
5253
5254
* The following options are available:
*
* @field euVehicleCategoryL: indicates a vehicle in the L category.
*
* @field euVehicleCategoryM: indicates a vehicle in the M category.
*
* @field euVehicleCategoryN: indicates a vehicle in the N category.
*
* @field euVehicleCategoryO: indicates a vehicle in the O category.
*
* @field euVehicleCategoryT: indicates a vehicle in the T category.
*
* @field euVehicleCategoryG: indicates a vehicle in the G category.
*
* @category: Vehicle information
* @revision: Created in V2.1.1
*/
EuVehicleCategoryCode ::= CHOICE {
euVehicleCategoryL EuVehicleCategoryL,
euVehicleCategoryM EuVehicleCategoryM,
euVehicleCategoryN EuVehicleCategoryN,
euVehicleCategoryO EuVehicleCategoryO,
euVehicleCategoryT NULL,
euVehicleCategoryG NULL
*
* The eventPosition of each @ref EventPoint is defined with respect to the previous @ref EventPoint in the list.
* Except for the first @ref EventPoint which is defined with respect to a position outside of the context of this DF.
*
* @category: GeoReference information, Traffic information
* @note: this DF is kept for backwards compatibility reasons only. It is recommended to use the @ref EventZone instead.
* @revision: Generalized the semantics in V2.1.1
*/
EventHistory::= SEQUENCE (SIZE(1..23)) OF EventPoint
/**
* This DF provides information related to an event at a defined position.
*
*
* @field eventPosition: offset position of a detected event point to a defined position.
*
* @field eventDeltaTime: optional time travelled by the detecting ITS-S since the previous detected event point.
*
* @field informationQuality: Information quality of the detection for this event point.
*
* @category: GeoReference information, Traffic information
* @revision: generalized the semantics in V2.1.1
*/
EventPoint ::= SEQUENCE {
eventPosition DeltaReferencePosition,
eventDeltaTime PathDeltaTime OPTIONAL,
informationQuality InformationQuality
}
/**
* The DF shall contain a list of @ref EventPoint, where all @ref EventPoint either contain the COMPONENT eventDeltaTime
* or do not contain the COMPONENT eventDeltaTime.
*
* The eventPosition of each @ref EventPoint is defined with respect to the previous @ref EventPoint in the list.
* Except for the first @ref EventPoint which is defined with respect to a position outside of the context of this DF.
*
* @category: GeoReference information, Traffic information
* @revision: created in V2.1.1 based on EventHistory
*/
EventZone::= EventHistory
((WITH COMPONENT (WITH COMPONENTS {..., eventDeltaTime PRESENT})) |
(WITH COMPONENT (WITH COMPONENTS {..., eventDeltaTime ABSENT})))
/**
* This DF indicates a geographical position.
*
* It shall include the following components:
*
* @field latitude: the latitude of the geographical position.
*
* @field longitude: the longitude of the geographical position.
*
* @field altitude: the altitude of the geographical position with default value unavailable.
*
*/
GeoPosition::= SEQUENCE{
latitude Latitude,
longitude Longitude,
altitude AltitudeValue DEFAULT unavailable
}
* This DF represents the top-level DF to represent a lane position. A lane position is a transversal position on the carriageway at a specific longitudinal position, in resolution of lanes of the carriageway.
* @note: This DF is the most general way to represent a lane position: it provides a complete set of information regarding a transversal (dimensionless) position on the carriageway at a specific
* reference position, i.e. it provides different options and synonyms to represent the lane at which the reference position (the point) is located. A confidence is used to describe the probability
* that the object is located in the provided lane. The dimension of the object or extension of an area are not considered: See @ref OccupiedLanesWithConfidence for describing the occupation of lanes,
* where the dimensions of an object or the extension of an area is considered.
* It shall include the following components:
*
* @field lanePositionBased: lane position information for a defined reference position.
* @field mapBased: optional lane position information described in the context of a MAPEM as specified in ETSI TS 103 301 [15].
* If present, it shall describe the same reference position using the lane identification in the MAPEM. This component can be used only if a MAPEM is available for the reference position
* (e.g. on an intersection): In this case it is used as a synonym to the mandatory component lanePositionBased.
* @field confidence: confidence information for expressing the probability that the object is located at the indicated lane.
* If the value of the component lanePositionBased is generated directly from the absolute reference position and reference topology information,
* no sensor shall be indicated in the component usedDetectionInformation of the @ref MetaInformation.
*
* @revision: newly created in V2.2.1. The previous DF GeneralizedLanePosition is now renamed to @ref LanePositionOptions.
GeneralizedLanePosition ::= SEQUENCE {
lanePositionBased LanePositionOptions,
mapBased MapPosition OPTIONAL,
confidence MetaInformation,
...
}
/**
* This DF represents transversal position information with respect to the road, at an externally defined reference position. It shall contain a set of up to `4` @ref GeneralizedLanePosition.
* Multiple entries can be used to describe several lane positions with the associated confidence, in cases where the reference position cannot be mapped to a single lane.
*
* @category: Road Topology information
* @revision: Created in V2.2.1
*/
GeneralizedLanePositions ::= SEQUENCE (SIZE(1..4)) OF GeneralizedLanePosition
/**
* This DF represents the Heading in a WGS84 co-ordinates system.
* The specific WGS84 coordinate system is specified by the corresponding standards applying this DE.
* @field headingConfidence: the confidence value of the heading value with a predefined confidence level.
* @note: this DF is kept for backwards compatibility reasons only. It is recommended to use the @ref Wgs84Angle instead.
*/
Heading ::= SEQUENCE {
headingValue HeadingValue,
headingConfidence HeadingConfidence
}
/**
* This DF provides information associated to heading change indicators such as a change of direction.
*
*
* @field direction: the direction of heading change value.
*
* @field actionDeltaTime: the period over which a direction change action is performed.
*
* @revision: created in V2.1.1
*/
HeadingChangeIndication ::= SEQUENCE {
direction TurningDirection,
actionDeltaTime DeltaTimeTenthOfSecond,
...
}
/**
* This DF represents a frequency channel
*
* @field centreFrequency: the centre frequency of the channel in 10^(exp+2) Hz (where exp is exponent)
* @field channelWidth: width of the channel in 10^exp Hz (where exp is exponent)
* @field exponent: exponent of the power of 10 used in the calculation of the components above.
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementChannel ::= SEQUENCE {
centreFrequency INTEGER (1 .. 99999),
channelWidth INTEGER (0 .. 9999),
exponent INTEGER (0 .. 15)
}
/**
*
* This DF represents a zone inside which the ITS communication should be restricted in order to manage interference.
*
*
* @field zoneDefinition: contains the geographical definition of the zone.
*
* @field managementInfo: contains interference management information applicable in the zone defined in the component zoneDefinition.
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementZone ::= SEQUENCE {
zoneDefinition InterferenceManagementZoneDefinition,
managementInfo InterferenceManagementInfo
}
/**
* This DF represents the geographical definition of the zone where band sharing occurs.
*
*
* @field interferenceManagementZoneLatitude: Latitude of the centre point of the interference management zone.
*
* @field interferenceManagementZoneLongitude: Longitude of the centre point of the interference management zone.
*
* @field interferenceManagementZoneId: optional identification of the interference management zone.
* @field interferenceManagementZoneShape: shape of the interference management zone placed at the centre point.
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementZoneDefinition::= SEQUENCE{
interferenceManagementZoneLatitude Latitude,
interferenceManagementZoneLongitude Longitude,
interferenceManagementZoneId ProtectedZoneId OPTIONAL,
interferenceManagementZoneShape Shape
(WITH COMPONENTS{..., radial ABSENT, radialShapes ABSENT}) OPTIONAL,
* This DF shall contain a list of up to 16 definitions containing interference management information, per affected frequency channels.
*
* @category: Communication information.
* @revision: created in V2.1.1
*/
InterferenceManagementInfo::= SEQUENCE (SIZE(1..16,...)) OF InterferenceManagementInfoPerChannel
/**
* This DF contains interference management information for one affected frequency channel.
*
5474
5475
5476
5477
5478
5479
5480
5481
5482
5483
5484
5485
5486
5487
5488
5489
5490
5491
5492
5493
5494
5495
5496
*
* @field interferenceManagementChannel: frequency channel for which the zone should be applied interference management
*
* @field interferenceManagementZoneType: type of the interference management zone.
*
* @field interferenceManagementMitigationType: optional type of the mitigation to be used in the interference management zone.
* In the case where no mitigation should be applied by the ITS-S, this is indicated by the field interferenceManagementMitigationType being absent.
*
* @field expiryTime: optional time at which the validity of the interference management communication zone will expire.
* This component is present when the interference management is temporarily valid
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementInfoPerChannel ::= SEQUENCE {
interferenceManagementChannel InterferenceManagementChannel,
interferenceManagementZoneType InterferenceManagementZoneType,
interferenceManagementMitigationType MitigationForTechnologies OPTIONAL,
expiryTime TimestampIts OPTIONAL,
...
}
/**
* This DF shall contain a list of up to 16 interference management zones.
*
* **EXAMPLE**: An interference management communication zone may be defined around a CEN DSRC road side equipment or an urban rail operational area.
*
* @category: Communication information
* @revision: created in V2.1.1
*/
InterferenceManagementZones ::= SEQUENCE (SIZE(1..16), ...) OF InterferenceManagementZone
/**
* This DF represents a unique id for an intersection, in accordance with ETSI TS 103 301 [15].
*
* @field region: the optional identifier of the entity that is responsible for the region in which the intersection is placed.
* It is the duty of that entity to guarantee that the @ref Id is unique within the region.
*
* @field id: the identifier of the intersection
*
* @note: when the component region is present, the IntersectionReferenceId is guaranteed to be globally unique.
* @category: Road topology information
* @revision: created in V2.1.1
*/
IntersectionReferenceId ::= SEQUENCE {
region Identifier2B OPTIONAL,
id Identifier2B
}
/**
* This DF shall contain a list of waypoints @ref ReferencePosition.
*
* @category: GeoReference information
* @revision: Editorial update in V2.1.1
*/
ItineraryPath ::= SEQUENCE SIZE(1..40) OF ReferencePosition
/**
* This DF represents a common message header for application and facilities layer messages.
* It is included at the beginning of an ITS message as the message header.
*
*
* @field protocolVersion: version of the ITS message.
*
* @field messageId: type of the ITS message.
*
* @field stationId: the identifier of the ITS-S that generated the ITS message.
*
* @category: Communication information
* @revision: update in V2.1.1: messageID and stationID changed to messageId and stationId; messageId is of type MessageId.
*/
ItsPduHeader ::= SEQUENCE {
5554
5555
5556
5557
5558
5559
5560
5561
5562
5563
5564
5565
5566
5567
5568
5569
5570
5571
5572
5573
5574
5575
5576
5577
5578
/**
* This DF provides the reference to the information contained in a IVIM according to ETSI TS 103 301 [15].
*
* It shall include the following components:
*
* @field serviceProviderId: identifier of the organization that provided the IVIM.
*
* @field iviIdentificationNumber: identifier of the IVIM, as assigned by the organization identified in serviceProviderId.
*
* @category: Communication information
* @revision: Created in V2.2.1
*/
IvimReference::= SEQUENCE {
serviceProviderId Provider,
iviIdentificationNumber IviIdentificationNumber
}
/**
* This DF shall contain a list of @ref IvimReference.
*
* @category: Communication information
* @revision: Created in V2.2.1
*/
IvimReferences::= SEQUENCE (SIZE(1..8,...)) OF IvimReference
* This DF indicates a transversal position in resolution of lanes and other associated details.
*
* @field transversalPosition: the transversal position.
*
* @field laneType: the type of the lane identified in the component transversalPosition. By default set to `traffic`.
*
* @field direction: the traffic direction for the lane position relative to a defined reference direction. By default set to `sameDirection`, i.e. following the reference direction.
*
*/
LanePositionAndType::= SEQUENCE {
transversalPosition LanePosition,
5595
5596
5597
5598
5599
5600
5601
5602
5603
5604
5605
5606
5607
5608
5609
5610
5611
5612
5613
5614
5615
5616
5617
5618
5619
5620
5621
5622
5623
5624
5625
5626
5627
5628
5629
5630
5631
5632
5633
5634
5635
5636
5637
5638
5639
5640
5641
5642
5643
5644
laneType LaneType DEFAULT traffic,
direction Direction DEFAULT sameDirection,
...
}
/**
* This DF represents a set of options to describe a lane position and is the second level DF to represent a lane position. The top-level DFs are @ref GeneralizedLanePosition or @ref OccupiedLanesWithConfidence.
* A lane position is a transversal position on the carriageway at a specific longitudinal position, in resolution of lanes of the carriageway.
*
* The following options are available:
*
* @field simplelanePosition: a single lane position without any additional context information.
*
* @field simpleLaneType: a lane type, to be used when the lane position is unknown but the type of lane is known. This can be used in scenarios where a certain confidence about the used lane type is given
* but no or limited knowledge about the absolute lane number is available. For example, a cyclist on a cycle-lane or vehicles on a specific lane that is unique for the part of the road (e.g. a bus lane).
*
* @field detailedlanePosition: a single lane position with additional lane details.
*
* @field lanePositionWithLateralDetails: a single lane position with additional details and the lateral position within the lane.
*
* @field trafficIslandPosition: a position on a traffic island, i.e. between two lanes.
*
* @category: Road Topology information
* @revision: Created in V2.2.1 from the DF GeneralizedLanePosition of V2.1.1.
*/
LanePositionOptions ::= CHOICE {
simplelanePosition LanePosition,
simpleLaneType LaneType,
detailedlanePosition LanePositionAndType,
lanePositionWithLateralDetails LanePositionWithLateralDetails,
trafficIslandPosition TrafficIslandPosition,
...
}
/**
* This DF is a third-level DF that represents a lane position and is an extended version of @ref LanePositionAndType that adds the distances to the left and right lane border.
*
* It shall additionally include the following components:
*
* @field distanceToLeftBorder: the distance of the transversal position to the left lane border. The real value shall be rounded to the next lower encoding-value.
*
* @field distanceToRightBorder: the distance of the transversal position to the right lane border. The real value shall be rounded to the next lower encoding-value.
*
* @category: Road Topology information
* @revision: Created in V2.2.1
*/
LanePositionWithLateralDetails ::= SEQUENCE {
COMPONENTS OF LanePositionAndType,
distanceToLeftBorder StandardLength9b,
distanceToRightBorder StandardLength9b,
* This DF indicates the vehicle acceleration at lateral direction and the confidence value of the lateral acceleration.
*
* @field lateralAccelerationValue: lateral acceleration value at a point in time.
*
* @field lateralAccelerationConfidence: confidence value of the lateral acceleration value.
* @note: this DF is kept for backwards compatibility reasons only. It is recommended to use @ref AccelerationComponent instead.
*/
LateralAcceleration ::= SEQUENCE {
lateralAccelerationValue LateralAccelerationValue,
lateralAccelerationConfidence AccelerationConfidence
}
/**
* This DF indicates the vehicle acceleration at longitudinal direction and the confidence value of the longitudinal acceleration.
*
* @field longitudinalAccelerationValue: longitudinal acceleration value at a point in time.
* @field longitudinalAccelerationConfidence: confidence value of the longitudinal acceleration value.
* @note: this DF is kept for backwards compatibility reasons only. It is recommended to use @ref AccelerationComponent instead.
* @category: Vehicle information
* @revision: V1.3.1
*/
LongitudinalAcceleration ::= SEQUENCE {
longitudinalAccelerationValue LongitudinalAccelerationValue,
longitudinalAccelerationConfidence AccelerationConfidence
}
/**
* This DF represents the estimated position along the longitudinal extension of a carriageway or lane.
* @field longitudinalLanePositionValue: the mean value of the longitudinal position along the carriageway or lane w.r.t. an externally defined start position.
* @field longitudinalLanePositionConfidence: The confidence value associated to the value.
* @revision: created in V2.1.1, description revised in V2.2.1
*/
LongitudinalLanePosition ::= SEQUENCE {
longitudinalLanePositionValue LongitudinalLanePositionValue,
longitudinalLanePositionConfidence LongitudinalLanePositionConfidence
}
/**
5702
5703
5704
5705
5706
5707
5708
5709
5710
5711
5712
5713
5714
5715
5716
5717
5718
5719
5720
5721
5722
5723
5724
5725
5726
5727
5728
5729
5730
5731
5732
* This DF shall contain a list of a lower triangular positive semi-definite matrices.
*
* @category: Sensing information
* @revision: Created in V2.1.1
*/
LowerTriangularPositiveSemidefiniteMatrices::= SEQUENCE SIZE (1..4) OF LowerTriangularPositiveSemidefiniteMatrix
/**
* This DF represents a lower triangular positive semi-definite matrix.
*
* It shall include the following components:
*
* @field componentsIncludedIntheMatrix: the indication of which components of a @ref PerceivedObject are included in the matrix.
* This component also implicitly indicates the number n of included components which defines the size (n x n) of the full correlation matrix "A".
*
* @field matrix: the list of cells of the lower triangular positive semi-definite matrix ordered by columns and by rows.
*
* The number of columns to be included "k" is equal to the number of included components "n" indicated by componentsIncludedIntheMatrix minus 1: k = n-1.
* These components shall be included in the order or their appearance in componentsIncludedIntheMatrix.
* Each column "i" of the lowerTriangularCorrelationMatrixColumns contains k-(i-1) values.
*
* @category: Sensing information
* @revision: Created in V2.1.1
*/
LowerTriangularPositiveSemidefiniteMatrix ::= SEQUENCE{
componentsIncludedIntheMatrix MatrixIncludedComponents,
matrix LowerTriangularPositiveSemidefiniteMatrixColumns
}
/**
* This DF represents the columns of a lower triangular positive semi-definite matrix, each column not including the main diagonal cell of the matrix.
* Given a matrix "A" of size n x n, the number of @ref CorrelationColumn to be included in the lower triangular matrix is k=n-1.
* @revision: Created in V2.1.1, extension indicator added in V2.2.1
LowerTriangularPositiveSemidefiniteMatrixColumns ::= SEQUENCE SIZE (1..13,...) OF CorrelationColumn
5740
5741
5742
5743
5744
5745
5746
5747
5748
5749
5750
5751
5752
5753
5754
5755
5756
5757
5758
5759
5760
5761
5762
5763
5764
5765
5766
5767
5768
5769
5770
5771
5772
5773
5774
5775
5776
5777
5778
5779
5780
5781
5782
5783
5784
/**
* This DF provides information about the configuration of a road section in terms of MAPEM lanes or connections using a list of @ref MapemExtractedElementReference.
* @category: Road topology information
* @revision: Created in V2.2.1
*/
MapemConfiguration::= SEQUENCE(SIZE(1..16,...)) OF MapemElementReference
/**
* This DF provides references to an element described in a MAPEM according to ETSI TS 103 301 [i.15], such as a lane or connection at a specific intersection or road segment.
*
* It shall include the following components:
*
* @field mapReference: the optional reference to a MAPEM that describes the intersection or road segment. It is absent if the MAPEM topology is known from the context.
*
* @field laneIds: the optional list of the identifiers of the lanes to be referenced.
*
* @field connectionIds: the optional list of the identifiers of the connections to be referenced.
*
* @category: Road topology information
* @revision: Created in V2.2.1
*/
MapemElementReference::= SEQUENCE {
mapReference MapReference OPTIONAL,
laneIds MapemLaneList OPTIONAL,
connectionIds MapemConnectionList OPTIONAL,
...
}
((WITH COMPONENTS {..., laneIds PRESENT}) |
(WITH COMPONENTS {..., connectionIds PRESENT }))
/**
* This DF provides references to MAPEM lanes using a list of @ref Identifier1B.
*
* @category: Road topology information
* @revision: Created in 2.2.1
*/
MapemLaneList ::= SEQUENCE (SIZE(1..8,...)) OF Identifier1B
/**
* This DF provides references to MAPEM connections using a list of @ref Identifier1B.
* Note: connections are allowed “maneuvers” (e.g. an ingress / egress relation) on an intersection.
*
* @category: Road topology information
*/
MapemConnectionList ::= SEQUENCE (SIZE(1..8,...)) OF Identifier1B
* This DF indicates a position on a topology description transmitted in a MAPEM according to ETSI TS 103 301 [15].
*
* @field mapReference: optionally identifies the MAPEM containing the topology information.
* It is absent if the MAPEM topology is known from the context.
*
* @field laneId: optionally identifies the lane in the road segment or intersection topology on which the position is located.
* @field connectionId: optionally identifies the connection inside the conflict area of an intersection, i.e. it identifies a trajectory for travelling through the
* conflict area of an intersection which connects e.g an ingress with an egress lane.
*
* @field longitudinalLanePosition: optionally indicates the longitudinal offset of the map-matched position of the object along the lane or connection measured from the start of the lane/connection, along the lane.
* @revision: Created in V2.1.1, definition of longitudinalLanePosition amended in V2.2.1
*/
MapPosition ::= SEQUENCE {
mapReference MapReference OPTIONAL,
laneId Identifier1B OPTIONAL,
connectionId Identifier1B OPTIONAL,
longitudinalLanePosition LongitudinalLanePosition OPTIONAL,
...
}
((WITH COMPONENTS {..., laneId PRESENT, connectionId ABSENT }) |
(WITH COMPONENTS {..., laneId ABSENT, connectionId PRESENT }))
* This DF provides the reference to the information contained in a MAPEM according to ETSI TS 103 301 [15].
*
* The following options are provided:
*
* @field roadsegment: option that identifies the description of a road segment contained in a MAPEM.
*
* @field intersection: option that identifies the description of an intersection contained in a MAPEM.
*
* @category: Road topology information
* @revision: Created in V2.1.1
*/
MapReference::= CHOICE {
roadsegment RoadSegmentReferenceId,
intersection IntersectionReferenceId
}
/**
* This DF shall contain a list of @ref MapReference.
*
* @category: Road topology information
* @revision: Created in V2.2.1
*/
MapReferences::= SEQUENCE (SIZE(1..8,...)) OF MapReference
/**
* This DE indicates a message rate.
*
* @field mantissa: indicates the mantissa.
*
* @field exponent: indicates the exponent.
*
* The specified message rate is: mantissa*(10^exponent)
*
* @unit: Hz
* @category: Communication information
* @revision: Created in V2.1.1
*/
MessageRateHz::= SEQUENCE {
mantissa INTEGER (1..100),
exponent INTEGER (-5..2)
* This DF provides information about a message with respect to the segmentation process on facility layer at the sender.
* @field totalMsgNo: indicates the total number of messages that have been assembled on the transmitter side to encode the information
* during the same messsage generation process.
* @field thisMsgNo: indicates the position of the message within of the total set of messages generated during the same message generation process.
* @revision: Created in V2.1.1, description revised in V2.2.1
totalMsgNo CardinalNumber3b,
thisMsgNo OrdinalNumber3b
/**
* This DF provides information about the source of and confidence in information.
*
* It shall include the following components:
*
* @field usedDetectionInformation: the type of sensor(s) that is used to provide the detection information.
*
* @field usedStoredInformation: the type of source of the stored information.
*
* @field confidenceValue: an optional confidence value associated to the information.
*
* @category: Basic information
* @revision: Created in V2.2.1
*/
MetaInformation::=SEQUENCE{
usedDetectionInformation SensorTypes,
usedStoredInformation StoredInformationType,
confidenceValue ConfidenceLevel OPTIONAL,
...
}
* This DF shall contain a list of @ref MitigationPerTechnologyClass.
*
* @category: Communication information
* @revision: Created in V2.1.1
*/
MitigationForTechnologies ::= SEQUENCE (SIZE(1..8)) OF MitigationPerTechnologyClass
/**
* This DF represents a set of mitigation parameters for a specific technology, as specified in ETSI TS 103 724 [24], clause 7.
* @field accessTechnologyClass: channel access technology to which this mitigation is intended to be applied.
*
* @field powerReduction: the delta value of power to be reduced.
* @unit: dB
*
* @field dmcToffLimit: idle time limit as defined in ETSI TS 103 175 [19].
* @field dmcTonLimit: Transmission duration limit, as defined in ETSI EN 302 571 [20].
* @unit: ms
*
* @note: All parameters are optional, as they may not apply to some of the technologies or
* interference management zone types. Specification details are in ETSI TS 103 724 [24], clause 7.
*
* @category: Communication information
* @revision: Created in V2.1.1
*/
MitigationPerTechnologyClass ::= SEQUENCE {
accessTechnologyClass AccessTechnologyClass,
lowDutyCycle INTEGER (0 .. 10000) OPTIONAL,
powerReduction INTEGER (0 .. 30) OPTIONAL,
dmcToffLimit INTEGER (0 .. 1200) OPTIONAL,
dmcTonLimit INTEGER (0 .. 20) OPTIONAL,
...
}
/**
* This DF indicates both the class and associated subclass that best describes an object.
*
* The following options are available:
*
* @field vehicleSubClass: the object is a road vehicle and the specific subclass is specified.
* @field vruSubClass: the object is a VRU and the specific subclass is specified.
* @field groupSubClass: the object is a VRU group or cluster and the cluster information is specified.
* @field otherSubClass: the object is of a different type than the above and the specific subclass is specified.
*
* @category: Sensing information
* @revision: Created in V2.1.1
*/
ObjectClass ::= CHOICE {
vehicleSubClass TrafficParticipantType (unknown|passengerCar..tram|agricultural),
vruSubClass VruProfileAndSubprofile,
groupSubClass VruClusterInformation
(WITH COMPONENTS{..., clusterBoundingBoxShape ABSENT}),
*
* @category: Sensing information
* @revision: Created in V2.1.1
*/
ObjectClassDescription ::= SEQUENCE (SIZE(1..8)) OF ObjectClassWithConfidence
/**
* This DF represents the classification of a detected object together with a confidence level.
* @field Confidence: the associated confidence level.
*
* @category: Sensing information
* @revision: Created in V2.1.1
*/
ObjectClassWithConfidence ::= SEQUENCE {
objectClass ObjectClass,
confidence ConfidenceLevel
}
* This DF represents a dimension of an object together with a confidence value.
* @field value: the object dimension value which can be estimated as the mean of the current distribution.
* @field confidence: the associated confidence value.